TREX TXA53 User manual

A/B
Qty. Description
Step 1
A/B
Step 2
Model: TXA53
Note: pins can be removed for folding
Step 2
6/2/2011
Then insert pins
Insert (2) 2¼" bolts, washers and locknuts
into pre-drill holes
Assembly Instructions
Unfold chair assembly
B - 1/4 FLAT WASHER
2
ALL HARDWARE IS COATED STAINLESS STEEL
B - 1/4-20 NYLOCK NUT
2
A - 1/4-20 X 2-1/4 WAFER SHCS
2
Pin
2
Incorrect
Correct
Step 1
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
7/16 wrench
TOOLS NEEDED

Attach feet to legs using )
the umbrella brace.
Attach the leg assemblies to the table top using
can be removed if necessary to fit
umbrella stand
TXRT236, TXRCT236
4
Step 1
(8) 2 1/2" screws.
Models:
Assembly Instructions
Qty.
Set table upright and tighten all bolts
(4) 2 1/2" Chair bolts (
fine thread
Description
__(1) Hardware pack
Step 2
Lay the table top on a flat surface.
Step 4
9/28/2012
TOOLS NEEDED
TXRRT236, TXRBT236
*Please note: umbrella support optional,
4mm HEX KEY: INCLUDED
Step 3
Attach leg braces using
(4) 3" screws
Attach umbrella brace to
the leg braces using (2) 3" screws.
Install 1 1/2" bolt into threaded insert on
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
__(1) Umbrella Brace
ALL HARDWARE IS COATED STAINLESS STEEL
D
D
DD
Removable umbrella plug
included with table
A
4MM T-HANDLE HEX KEY
(INCLUDED)
)
1(fine thread
A - 1/4-20 X 1-1/2 WAFER SHCS
B - 1/4-20 X 2-1/2 WAFER SHCS
(fine thread)
B
C
C
C - .27 X 2 1/2 SOCKET WAFER "A"
8
D - .27 X 3 SOCKET WAFER "A"
6