TREX TXC23 User manual

Sideframe
Back assembly
Seat assembly
Seat support
Top back rail
12 .27 X 3 SOCKET WAFER "A"
4MM HEX KEY, ALLEN, T-HANDLE
DescriptionQty.
6/2/2011
(INCLUDED)
__(1) Top back rail
__(1) Hardware pack
Lay the seat assembly on its side.
Attach sideframe using (3) 3” chair screws
Model: TXC23
Assembly Instructions
__(1) Seat support
__(1) Seat cushion
__(1) Back cushion
Step 2
- Insert seat and back cushions
using (2) 3” chair screws
TOOLS NEEDED
Step 3
Repeat Step 2 on other side.
- Attach seat support to seat assembly
using (2) 3” chair screws
- Attach back assembly to seat assembly
__(1) Seat assembly
__(1) Back assembly
__(2) Sideframes
Step 1
Step 4
- Attach top back rail to sideframes
using (2) 3” chair screws
ALL HARDWARE IS COATED STAINLESS STEEL

box - TXC23L
Sections needed for
SOFA
box - TXC23R
box - TXC23C
TXC71
box - TXC23L
page 1
Sort Boxes
box - TXC23R
Items are shipped in multible boxes
Sections needed for
LOVESEAT
Assembly Instruction Packet
For: TXC71 and TXC47
10/29/2010
TXC47

Capnut Qty 6
3 1/4" Chair bolt Qty 4
fine thread
Seat Cushion
Sofa Assembly
Layout Parts
Backs
Seat supports
Seats
Back rails
Sideframes
Center legs
Qty 3
Layout Hardware
note: you will need hardware pack from TXC23C box 3
page 2
front legsback legs
1
Back Cushion
Qty 3
1 1/2" Chair bolt Qty 2
fine thread
3" Chair Screw Qty 20
2
course thread
Tools Needed
4mm Hex Key - included
4mm Hex Bit for screw gun - included
Phillips head screwdriver

R
Right Sideframe and Back rail to Seat
5
R
Attach Sideframe and Back rail
using (4) 3" chair screws
Sofa Assembly
→
→
note: use course thread on 1,2,3,4,5
page 3
Attach Sideframe and Back rail
using (4) 3" chair screws
Repeat until all three seats
and backs are assembled
3
Attach Seat support
using (2) 3” chair screws Attach Back to Seat
using (2) 3” chair screws
12
4
Left Sideframe and Back rail to Seat
L
L

Attach small center legs with
(2) 3 1/4" chair bolts and (2) capnuts
Attach Seats to Back legs using
(2) 3 1/4" chair bolts and capnuts
Attach Rails to Back legs using
(2) 1 1/2" chair bolts and capnuts
Fit all sections together
with Center legs
6
9Put cushions on sofa
Your sofa is assembled!
10
→
Sofa Assembly
note: use fine thread bolts for 7, 8, 9
page 4
7
8

3 1/4" Chair bolt Qty 2
fine thread
Seat supports
Center legs
Sideframes
Back rails
Seats
Backs
Loveseat Assembly
1 1/2" Chair bolt Qty 1
Layout Hardware
3
Tools Needed
4mm Hex Key - included
4mm Hex Bit for screw gun - included
Phillips head screwdriver
page 5
front legback leg
Seat Cushion
Qty 2
Back Cushion
Qty 2
Layout Parts
1
RL
Capnut Qty 3
3" Chair Screw Qty 16
2
course thread
fine thread

4
Left Sideframe and Back rail to Seat
R
Right Sideframe and Back rail to Seat
Attach Seat support
using (2) 3” chair screws Attach Back to Seat
using (2) 3” chair screws
12
note: use course thread on 1,2,3,4,5
Repeat until both seats
and backs are assembled
3
→
→
Loveseat Assembly
page 6
L
L
Attach Sideframe and Back rail
using (4) 3" chair screws
5
R
Attach Sideframe and Back rail
using (4) 3" chair screws

Attach Rails to Back leg using
(1) 1 1/2" chair bolt and capnut
Attach Seats to Back leg using
(1) 3 1/4" chair bolt and capnut
Loveseat Assembly
6
Fit all sections together
with Center legs
→
7
Put cushions on loveseat
Your loveseat is assembled!
8
9
10
note: use fine thread bolts for 7, 8, 9
page 7
Attach small Center leg with
(1) 3 1/4" chair bolt and (1) capnut

TOOLS NEEDED
.27 X 3" SOCKET WAFER "A"
10
using (1) 3” chair screw
DescriptionQty.
10/2/2012
__(2) Bottom braces
Model: TXO23
Assembly Instructions
__(1) Mid brace
__(2) Top braces
Step 3
Set cushion in ottoman
__(1) Hardware pack
__(1) Ottoman cushion
Repeat step 1 on other side
Step 2
__(2) Sideframe assembly
Step 1
- Attach bottom braces and top braces to sideframes
using (4) 3” chair screws
- Attach mid brace to sideframe
ALL HARDWARE IS COATED STAINLESS STEEL
Bottom braces
Mid brace
Top braces
Sideframe
assembly

Lay table top face down.
Description
using (4) 3” chair screws
__(1) Hardware pack
using (4) 3” chair screws
TOOLS NEEDED
Model: TXT1836
Assembly Instructions
Attach sideframes to table top
Qty.
__(2) Braces
__(2) Sideframes
__(1) Table top
Step 1
Step 2
Attach braces to sideframes
ALL HARDWARE IS COATED STAINLESS STEEL 10/2/2012
.27 X 3" SOCKET WAFER "A"
8
4MM T-HANDLE HEX KEY
(INCLUDED)