Triax HDA 1x8S User manual

HDA 1x2S
HDMI-HDMI Distribution Amplier
Part No. 310006
HDA 1x8S
HDMI-HDMI Distribution Amplier
Part No. 310007
Operating Manual
TRIAX - your ultimate connection

•The illustrations in this operation manual are for explanation and guidance purposes only.
•The examples used throughout this manual are based on the HDA 1x2S and HDA 1x8S models.
Dear Triax customer
Thank you for purchasing the TRIAX HDMI-HDMI Distribution Amplier.
To ensure safety and many years of trouble-free operation, please read the Important Safety
Precautions carefully before using this product.
Safety Precautions 3
Introduction 4
Features 4
Package Contents 4
Operation and Control 5
Front Panel HDA 1x2S 5
Front Panel HDA 1x8S 5
Rear Panel HDA 1x2S 6
Rear Panel HDA 1x8S 6
Connection Diagram and
Specications HDA 1x2S 7
Connection Diagram and
Specications HDA 1x8S 8
Operating Manual
Contents
2

Important Safety Precautions
•Cleaning - Unplug the AC power from the mains supply before cleaning the product.
Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
•Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product,
do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the casing
of the product.
•Water and moisture - Do not expose the unit to wet or damp conditions.
• Donotplacevasesoranyotherwater-lledcontainersonthisproduct.
 Thewatermayspillontotheproductcausingreorelectricshock.
•Ventilation - The vents and other openings in the casing are designed for ventilation.
 Donotcoverorblocktheseventsandopeningssinceinsucientventilationcancauseoverheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
•Heat sources - Keep the product away from heat sources such as direct sunlight, radiators, heaters,
 stovesandotherheat-generatingproducts(includingampliers).
• Topreventre,neverplaceanytypeofcandleornakedamesonthetoporneartheproduct.
•Servicing - Do not attempt to service the product yourself. Removing covers can expose you to
electric shock and other dangerous conditions. Maintenance should be performed by a suitably
 qualiedperson.
3

TheTriaxHDAHDMIDistributionAmplierSeriesisanadvancedsolutionfordistributing
HDMI Source signals to either 2 or 8 Sink devices. Each product in the Triax range is com-
patibletov1.3HDMIspecications,acuttingedgetechnologywhichdenesthesupportof
thetransferofDeepColour(10-bitand12-bit)videoandnewlosslesscompressed(LPCM
7.1CH,DolbyTrueHD,DolbyDigitalPlusandDTS-HDMasterAudio)digitalaudio,witha
highbandwidthupto225MHz(6.75Gbps).
Besidessplittinganddistributing,theHDASeriesalsoprovidessignalamplicationand
equalization of audio and Video from Input to Output.
• v1.3HDMI,HDCP1.1andDVI1.0compliant.
• Supports‘DeepColour’(10and12bit).
• One HDMI source can connect to two or eight HDMI displays simultaneously.
• HDCPkeysetsallowseachoutputtoworkindependentlywhenconnectingtoaHDMI
display.
• Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
• SupportsLPCM7.1CH,DolbyTrueHD,DolbyDigitalPlusandDTS-HDMasterAudio
 transmissions(32-192kHzF/ssamplerate).
• SupportsawiderangeofPCandHDTVresolutionsfromVGAtoUXGAand480ito 
1080p.
• Supports EDID functionality.
• Note: The detection priority is v1.3 HDMI > v1.2 HDMI > DVI On output1
• Supports CEC bypass.
•HDA 1x2S or HDA 1x8S
• 5VDCPowerSupplyAdapter
•Operating Manual
Introduction
Package Contents
Features
4

HDMI Output 1 HDMI Output 2
1. HDMI Output 1x2: Connects each of the output ports to a HDMI enabled display.
When more than one output is connected both screens display the
HDMI signal simultaneously.
1. HDMI Outputs: Connects each of the output ports to a HDMI enabled display.
When more than one output is connected the HDMI outputs play
identical video signals simultaneously.
2. Sync RED 3D ORG: TheLEDwillturnredwhentheinputsignalisnotin3D.Iftheinput
 signalis3DthentheLEDwillchangetoorange.
3. HDMI Input: Connects the input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top box.
4. Power LED: TheLEDwillilluminatewhenthepowerisconnected.
5. Power: PlugtheDC5V6ApowersupplyintotheHDA1x8Sandconnectthe
adapter to a mains socket and switch on.
5
1
12 3 4 5
Operation and Control
Front Panel - HDA 1x2S
Front Panel - HDA 1x8S
1

1. HDMI Input: Connects the input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top box.
2. Power LED: ThepowerLEDwillilluminatewhenpowerison.
3. Power: Plugthe5VDCpowersupplyintotheHDA1x2Sandconnectthe
adapter to a mains socket and switch on.
1. EDID Control Switch:
The Default EDID setting is set to TV, if the display shows the correct aspect ratio then it is
formatted correctly. If the display has not set to the correct aspect ratio then switch to the STD
setting to use the built-in EDID generator. When the EDID control is switched to TV setting, the
unitwilldetecttherstHDMIoutputsource’sEDIDandrecordit,itwilldefaulttothelowest
aspectratiothatallTV’scanview.IftherstdetectedoutputsourceisDVIitwillpasstonext
source,untiltherstHDMISourcehasbeendetected.
Note: To validate the EDID Control setting the HDA 1x8S needs to be re-booted by a mains
reset.
2. HDMI Outputs:
When more than one output is connected, the HDMI outputs play identical video signals
simultaneouslyandthesameimagewillbedisplayedonALLTV’s.
3. CEC Reset (SYS reset):
Switched to “ON” position, the system will send the internal CEC Command to the display
within8~10minutestoforceallthedisplaystoswitchbacktoHDMI1Source(Default).Ifthe
“OFF” position is selected the source CEC Command will not function and the TV’s continue
to display the local HDMI Source.
6
1 2 3
1 2 3
Operation and Control
Rear Panel - HDA 1x2S
Rear Panel - HDA 1x8S
HDMI Out HDMI Out HDMI Out HDMI Out HDMI Out On Off
SYS.Reset
STD TV
EDID
HDMI Input
DC 5V
Power

Connection Diagram HDA 1x2S
HDA 1 x 2S
Input Port 1 x HDMI Female Port (Type A)
HDCP Version V1.1
Output Port 2 x HDMI Female Port (Type A)
HDMI Specication V1.3
Frequency bandwidth 2.25Gbps (single link)
Power Supply 5V/ 1.2A DC (US/EU standards, CE/FCC/UL Certied)
Dimensions (mm) 100(W) x 147(D) x 25(H)
Weight (g) 300
Chassis Colour Anthracite RAL 7016
Chassis Material Metal
Operating Temperature Operating from 0°C - 40°C
7
HDMI Input
HDMI Output
Blue-Ray / DVD
HDA 1x2S
DisplayProjector

Connection Diagram HDA 1x8S
HDA 1 x 8S
Input Port 1 x HDMI Female Port (Type A)
HDCP Version V1.1
Output Port 8 x HDMI Female Port (Type A)
HDMI Specication V1.3
Frequency bandwidth 2.25Gbps (single link)
Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL Certied)
Dimensions (mm) 240(W) x 103(D) x 24(H)
Weight (g) 1000
Chassis Colour Anthracite RAL 7016
Chassis Material Metal
Operating Temperature Operating from 0°C - 40°C
8
HDMI Input
HDMI Output
HDA 1x8S

Notes

Issue 2
*Triax reserves the right to change the specications without prior notication