Tribit CallElite 81 User manual

EN
- 2 -
Tribit CallElite 81 Wireless Headset
Model : BTH80
User Manual
EN
Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Wireless Headset BTH80 is in compliance with Directive
2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: Http://les.Tribit.com/BTH80-DOC-EN.pdf
DE
Hiermit erklärt Thousandshores Deutschland GmbH, dass der Funkanlagentyp Wireless Headset BTH80 der Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: Http://les.Tribit.com/BTH80-DOC-DE.pdf
UK
Learn more about the UK Declaration of Conformity, Please click below link to download.
Http://les.tribit.com/BTH80-DOC-UK.pdf

EN EN
- 1 - - 2 -
Package Contents
Tribit CallElite 81 Headset
Charging Base
USB-C Charging Cable
USB Dongle
User Manual
1. Volume -
2. Volume +
3. MFB button
4. LED Indicator
5. USB-C Charging Port (headset jack)
6. USB-C Charging Port (charging base)
7. MIC Bar
8. Mute button
9. USB Dongle
Product Illustration
6
7
8
9
1
2
4
5
3
Frequency Range 2.402GHz ~ 2.480GHz
Max. Transmission Power ≦6dBm
Specications
Power On / Off
1. Power on: Press and hold the MFB button for 2s until
there is a prompt voice “Power on”. The green LED
indicator will glow steadily for 2s.
2. Power off: Press and hold the MFB button for 4s until
there is a prompt voice “Power off”. The red LED indicator
will flash for 1s and then turn off.
Bluetooth Connection
1. Press and hold the MFB button for 4s until the green
LED indicator flashes, and then the headset will
automatically enter Bluetooth pairing mode. The red /
green indicator lights will flash alternately.
Green LED
indicator on
2s
2. Open the Bluetooth menu on your phone and refresh
the Bluetooth device list, then select the audio device
named “Tribit CallElite 81” to begin pairing.
Mute Button
1. In the conversation state, short press the mute button
and there is a prompt voice “Mute on”. Then the
conversation will be muted.
2. In the mute state, short press the mute button and there
is a prompt voice “Mute off”. Then the conversation will
be restored to normal.
3. The mute function is only valid during conversation.
When you put someone on mute, they aren’t able to
hear anything you’re saying but you can still hear them.
For any third-party software, you may probably set the
mute function on the device it connects to.
Buttons Functionality
4s
Tribit CallElite
81
-->
Increase the volume Short press + button
Decrease the volume Short press - button
Next track Press and hold + button for 2s
Previous track Press and hold - button for 2s
Play / Pause Short press MFB button
Answer / End a call Short press MFB button
Reject an incoming call Press and hold MFB button for 1s
Activate / Turn off Siri Press and hold MFB button for 2s
Clear the pairing list
Press and hold the MFB and + buttons
for 4s in power-on state simultaneously
to clear the pairing list, and then the
headset will automatically go back to
pairing mode.

EN EN
- 3 - - 4 -
Voice Prompt
Power on Power on
Power off Power off
Pairing Pairing
Successfully connects to your
phone Connected
Bluetooth disconnection Disconnected
Low battery reminder Battery low
Charging Instruction
---->
5V
1.Charge the headset directly
Connect one end of the USB-C charging cable to a
5V power adapter (not included), and the other end to
the headset. The red LED indicator will glow sturdily
during charging while it will change steady green after
the headset is fully charged.
2.Charge the headset by the charging base
Connect one end of the USB-C charging cable to a 5V
power adapter (not included), and the other end to the
charging base. The red LED indicator will glow sturdily
during charging while it will change steady green after
the headset is fully charged.
3.Note:
Once the headset is placed on the charging base, it
will automatically shut off. After charging, the headset
will auto power on and connect to the last device once
you remove it from the charging base.
USB Dongle
-->
1. For the rst use, please insert the dongle into the USB
interface of your computer to power it on. It will auto
enter pairing state (blue indicator flashing).
2. Power on the wireless headset, and try to get the headset
as close as possible to the dongle, and then it will auto
connect to the dongle successfully in about 30s. If it
has ever been paired, the headset will auto connect to
the dongle each time when it is powered on.
3. After that, you can listen to music or chat with others
if your computer is playing music or on an online
conversation.
FAQs
Q: What devices does the headset work for?
A: The headset is suitable for those Bluetooth-enabled
Android, iOS, and PC devices.
Q: Does the dongle support plug-n-play or do I need to
download a driver before use?
A: It supports plug-n-play. No need to download any
drivers.
Q: The headset beeps after using for a while.
A: Please charge the headset for a certain time to make
sure it isn’t in low battery condition, or the mute function
is activated.
Q: Does it have mute function?
A: Yes but the mute function is only valid during
conversation. For any third-party software, you
may probably set the mute function on the device it
connects to.
Q: What are the charging ways for this headset?
A: The headset can be charged by connecting to the
charging base or to a power outlet directly through the
provided USB-C cable.
Q: How to mute a conversation?
A: Click the mute button during conversation, and you will
hear the voice of “Mute on” and then the conversation
will be muted. Click the mute button again to restore
conversation, and you will hear the voice of “Mute off”.
Q: How to clear off the pairing list (reset the headset)?
A: Press and hold the MFB button and volume + button
for 5 seconds, then the LED indicator will light off for
1 second and then flash in red/green alternately. You
will hear the voice of “power on” and “pairing”, which
indicates the headset has entered pairing state.
FCC Statement
Changes or modications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions：
(1)This device may not cause harmful interference.
(2)This device must accept any interference received,
including interference that may cause undesired
operation.
---->
5V