
EN EN
3 4
How to Charge the Speaker
Connect the other end of charging cable to a charging adapter and connect the
charging cable to the USB-C charging port on the Bluetooth speaker.
Note:
During charging, the indicator light is always on in red.
When the speaker is fully charged, the red indicator light goes off.
When using in wet or watery environment, please plug the silicone plug
tightly to avoid water in the charging port.
Button Control
1. On/Off
Press Turn on
•The status indicator light is always
on in blue.
•When the battery is low, the
status indicator will flash in red.
•During charging, the indicator is
always on in red.
•When the speaker is fully charged,
the red indicator light goes off.
Press Turn off All lights are off and the display
goes off.
Press and
hold for 8s
Forced
shutdown
All lights are off and the display
goes off.
Note: If the Tribit AquaEase Speaker is unable to be powered off due to unknown
reasons, you can forcibly turn it off by pressing and holding the power button for
8 seconds and then the speaker will re-start automatically.
Power Button
Status Indicator Light