TriBrer AOT600 User manual

Optical talk set
ENGLISHENGLISH

1
NOTENOTE
WARNINGWARNING
Wavelength:635-650nmWavelength:635-650nm
VISIBLE LASER RADIATIONVISIBLE LASER RADIATION
SEMICONDUCTOR LASERSEMICONDUCTOR LASER
AVOD EYE OR SKIN EXPOSUREAVOD EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATIONTO DIRECT OR SCATTERED RADIATION
Wavelength:800-1700nmWavelength:800-1700nm
INVISIBLE LASER RADIATIONINVISIBLE LASER RADIATION
SEMICONDUCTOR LASERSEMICONDUCTOR LASER
AVOD EYE OR SKIN EXPOSUREAVOD EYE OR SKIN EXPOSURE
TO DIRECT OR SCATTERED RADIATIONTO DIRECT OR SCATTERED RADIATION
CLASS I LASER PRODUCTCLASS I LASER PRODUCT
You arecautioned that changes ormodifications not espressly approvedin this document
could void youtauthority to operate this equipment.
To reducethe risk offire or electricshock,do not expose thisapparatus to rainor moisture.
To avoidelectrical shock, do notopen the cabinet. Referservicing to qualified personnel only.
As the laseris harmful to theeyes, do notattempt to disassemble the cabinet.
Precautions for Use
Use batteries
At the same time,can not use differentstyle or different capacitancebatteries. And only charge the rechargeable batteries.
Avoiding condensation problems
As much as possible,avoid sudden temperature changes.Do not attempt touse the drive immediatelyafter moving it froma cold
to a warm location,to raising the roomtemperature suddenly, as condensation may formwith in the drive.If the temperature
changes suddenly while usingthe drive, stop usingit and take outbatteries for at leastan hour.
Storage
When long timeno use,must take out the batteries to avoid destroyingthe device.

Carrying Bag
Headsetx2
Optical talk set
ENGLISHENGLISH
AOT600
RR
TriBrer
ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into(A) Type and(B) Type ,
only (A) Typeconnects with (B)Type
and can conversenormally,
if (A)and (A) or (B) and(B) connection,
will notbe able to converse.
ATTENTION:
A
Long/Short
CALL
Volume
Long
User's Guide
Host
2
Host
Check the accessories
Standard Edition
ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into(A) Type and(B) Type ,
only (A) Typeconnects with (B)Type
and can conversenormally,
if (A)and (A) or (B) and(B) connection,
will notbe able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long

ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long
Charging Indicator
USB Charging Interface
1
2
3
4
5
6
7
8
9
10
11
12
Fiber optic adapter
Power Key
Communication Distance SelectButton
Volume IncreaseButton
Calling Button
Volume DecreaseButton
2.5mm Earphone Socket
3.5mm Earphone Socket
3.5mm Microphone Socket
State Indicator
2
3
4
56
3
8
7
9
1
10 11 12
Description

1.Pull the battery cover lock 2.Raise the battery cover 3.Install the batteries correctly 4.Push the battery cover andlock
4
Installing the battery

Connecting fiber and earphone
5
}
3.5mm PC headset
2.5mm traffic specialheadset
SMF
The optical fibertelephone achieves Full-duplex
communication in singlefiber by using WDM Technology.
WDM( wavelength divisionmultiplex ) is a technology of
transmitting with differentwavelength in single fiber.
The optical fibertelephone is divides into Telephone
A and B.Telephone A and B have completely the same
operation except Telephone A modulates the signal on
1310mm wavelength, whileTelephone B is on1550mm
wavelength. Besides, Telephone A and B must usein couple.
This telephone canuse 2.5mm traffic special headset and
common PC headset.But they can not use in the same time.
ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long

ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long
6
On/Off
Press Button, the devicewill start
working. And thepower indication light is on.
Press this buttonagain, the telephone will shut
down.
Do not wearheadsets before booting to avoid
ear damage causedby loud volume. The correct
way is turning down the volumeafter booting,
then wearing it.After wearing the headset, adjust
the volume toclarity and without distortion.
ON/OFF
ON/OFF Long/Short
CALL
Volume
Long

Long/Short
Long
Communication Distance
7
According to the communication and line loss between twotelephones, you must choose the appropriate
communication distance.
The optical fibertelephone has two modes, remote communication and near fieldcommunication. When
the line lossis more than 20dB, you must use remote
mode. The maximumcommunication range of remote
mode is 120km.When one side is using optical fiber
holder,you must use remote mode too. The maximum
communication range is60km. When the line loss is
less than 20dB,you must turn off remote mode, or will
cause howling andlead to no communication. The
maximum NFC distanceis 60km.
Pressing Button, you canswitch between
remote communication modeand near field communication mode.
ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long
ON/OFF Long/Short
CALL
Volume
Long

Adjusting volume
8
Button is usedfor adjusting the
volume. "+" Buttonis for increasing the volume
and "-" Buttonis for decreasing. It will save the
volume automatically aftersetting. It will keep
the last settinginformation when next booting. ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long
ON/OFF Long/Short
CALL
Volume
Long
Volume

Calling
9
Through Button, you can call the
other person whenhe is online. During calling,
press Button for one second or more,
the other person'sdevice will make sound to
remind him.
ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long
ON/OFF Long/Short
CALL
Volume
Long
CALL
CALL

ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long
Low Power Indication
10
When the remainingbattery power is less
than 20%, thelow power indicator light will
turn on. If you use alkaline batteries, you need
change them withnew ones. If you use
rechargeable batteries, youneed charge them
at once.
POWER BATT-LO LONG

Charging
5V_500mA
11
The device hasa charging function. When using rechargeable batteries and turning up a lowbattery indication ,
you should promptlyshut down and recharge it. Long time undervoltage will shorten the lifetime of the
rechargeable batteries.
Connect the ACadapter to the device correctly, it can charge
Automatically. Besides,computer USB port can also be usedfor
charging. The battery remainingindicator keeps flashing during
charging. It willstop when the charging is finished. The battery
has finished thefast recharge and can be used directly. Ifyou do
not stopcharging atthis time, the device will continue the trickle
charge state, usingsmall current to supply natural discharge.But
this process isnot more than 48 hours. The device can still be used
while charging. Butdo not plug in the AC adapter when it is not
rechargeable batteries inside,or it willcause a high temperature and combustion, even explosion.
ON/OFF
POWER BATT-LO LONG
Optical Talk Set
The divides into (A) Type and (B) Type,
only (A) Type connects with (B) Type
and can converse normally,
if (A) and (A) or (B) and (B) connection,
will not be able to converse.
ATTENTION:
B
Long/Short
CALL
Volume
Long

12
Meter Maintenance
General maintenance
Optical fiber connectthe adapter should avoid contacting with hard objects and keep clean.
Should be storedin a dry and ventilated place to avoid moisture.
When un usefor long time,should remove the batteries before storage.
Fault and solution
Failure name
Cannot boot Check the battery has
power or not
Check the battery has
power or not
Immediately shutdown
after booting
Failure Cause
Can display,
but all operationsare valid
The instrument program
is disordered
Solution
Replace or rechargethe batteries
Check the batteries are
installed correctly
Reboot
Cannot charge Using non-rechargeableable
battery. Reinstall the rechargeablebatteries

6
Detail Parameters
Output (nm)
Dynamic range
Tuansmission distance
Modulation
Optic adapter
Laser Type
Output power
330g
168mm*95mm*38mm
<90% No dew
-20 ~+ 0
-10 ~+50
Can prevent small splash
>25H
Size AA rechargeable battery or Lr6
<+1dBm
FP
Analog
FC/PC
45dB
Short model>60Km,long model>120Km
1310nm 20nm(Devic A)/1550nm 20nm(Devic B)
13
Battery Type
Battery lifetime
Waterproof
Operate temp.
Storage temp.
Relative humidity
Size
Weight

P/N 40331 Rev.1015