
Trimline 100-120-140-170H-170Tunnel /Front DBInstallation instruction 3
1 INSTALLATION INSTRUCTIONS
NOTE
•The appliance must be installed, connected, inspected
according to local standards and regulations.
•
•The temperature of the walls near the side and back of
of 80 °C
•
•
•
code is stated on the appliance.
•
•Ignite the appliance according to the user manual and check
Distance from flammable materials in the vicinity
oftheappliance
Distance to non-ammable materials
The appliance needs to be placed a minimum distance
of 25mm from the wall unless stated otherwise in these
instructions.
WARNING
•
appliance, the glass panel surface is considered to be an
•
2 PLACING THE APPLIANCE
NOTE
Before installing the appliance, please read Chapter
3Removing and installing the glass panel, 9Concentric
pathways, 10Concentric ue system and .
2.1
Preparation and installation
•
and check the contents are intact and complete. Report
•
NOTE
understood the installation instructions.
•
panel (see Chapter 3 Removing and installing the glass
panel
•Put the appliance in place using the adjustable feet
Image 5
•
(see Paragraph 2.2 Connection to the gas supply pipes
•
•
9Concentric pathways
and Preparation and installation
•
the restrictor can be placed with two screws.
•
•
below the ceiling. If the space between the grille and the top
- Unit
- Remote control
- Ceramic wood set
- Bag of glow wool
- Bag of grit
- Bag of small chips
- Bag of large chips
-
-
-
-
- Lifting brackets
1
- Adjustable feet
- Built-in cassette
-
- Installation instruction
- User manual