Tripp Lite T014-001 User manual

1
Owner’s Manual
All-in-One Cable Tester
Model: T014-001
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
15-11-100-9334E3-EN.indd 1 11/20/2015 2:07:01 PM

2
Package Includes
Operation
Product Features
• T014-001 All-in-One Cable Tester
• BNC to RJ11 Adapter
• Carrying Case
• Owner’s Manual
Testing is as simple as connecting the desired cable and pressing the button.
When testing an uninstalled patch cable, you can leave the Main and
Remote testers connected. For testing BNC cable, the included BNC to RJ11
adapter will be needed to connect to the RJ11 port on the Remote tester.
When testing installed cable, you will have to remove the Remote Tester
from the Main Tester. Connect one end of the cable to the appropriate
connector on the Main Tester and the other end of the cable to the
appropriate connector on the Remote Tester.
Upon pressing the test button, you will hear one or more beeps from the Main
Tester, and the LEDs on the Main Tester will illuminate to indicate the
results:
• All-in-one cable tester combines a Main Tester unit with a Removable
Remote Tester unit
• Test cable connectivity, determining a connection, no connection, short or
crossed connection
• Allows for testing of multiple cable types: RJ11, RJ45, USB, and BNC
• Test cable lengths up to 600 ft. (180 m)
• Battery status LED indicates whether the battery is good, or is low and
needs to be replaced
• Testing is as simple as pressing a button
15-11-100-9334E3-EN.indd 2 11/20/2015 2:07:01 PM

3
Operation (continued)
Short – If there is a short in the cable, three beeps will sound, and the
SHORT LED will illuminate. In addition, the Pin LED(s) for the pin(s) where a
short exists will illuminate.
Connected – When a connection from one end of the cable to the other is
found, a low-to-high beep will sound and the PASS LED will illuminate. Also,
the Pin LEDs of any pin(s) where a connection is found will illuminate. Listed
below are the pins that are supposed to be connected for each connector
type. If all of the necessary pins for your connector type do not illuminate,
those that do not illuminate are open.
• RJ45 (UTP) – Pins 1 through 8 should be connected
• RJ45 (STP) – Pins 1 through 8 and the S pin should be connected
• RJ11 – RJ11 cables can be 2-wire, 4-wire, or 6-wire. 2-wire RJ11
cables use pins 3 and 4, 4-wire pins 2-5, and 6-wire pins 1-6
• USB – Pins 1-4 and the S pin should be connected
• BNC – Pins 1 and 2 should be connected
Crossed – If there are crossed wires in a cable, such as in a crossover
cable, two beeps will sound and the CROSS LED will illuminate. The Pin
LEDs of any pin(s) where a connection is found will illuminate, with the
flashing LEDs indicating pins that are crossed.
No Connection – When there is no connection found between the
connectors of the cable being tested, a single beep will sound and the OPEN
LED will illuminate. None of the Pin/Wire LEDs at the top of the Main Tester
Interface will illuminate. This means either that the cable is not plugged into
the connector on the Remote Tester, or there are no intact pin connections
from one end of the cable to the other.
Battery Status
There are two battery status LEDs on the Main Tester: Battery Good and
Battery Low. If the Battery Low LED is illuminated, replace the tester’s 9V
battery.
15-11-100-9334E3-EN.indd 3 11/20/2015 2:07:02 PM

4
Warranty and Product Registration
1-YEAR LIMITED WARRANTY
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one
(1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing
or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service
center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation
charges prepaid and must be accompanied by a brief description of the problem encountered and proof of
date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits
or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes,
claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered
into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the
country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen
or nitrous oxide.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
15-11-100 • 93-34E3_revA
15-11-100-9334E3-EN.indd 4 11/20/2015 2:07:02 PM