Tripp Lite SmartOnline SU3000XLCD User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: SU3000XLCD
SmartOnline 3kVA On-Line Double-Conversion UPS, Tower, Interactive LCD display, 100/110/120/127V, NEMA
5-15/20R & L5-30R outlets
Highlights
3000VA / 3kVA / 2700 watt on-line double-conversion tower UPS
100/110/120/127V 50/60Hz output, high efficiency economy mode option
Interactive LCD with 10 selectable screens of UPS and site power data
Expandable runtime, Hot-swappable batteries
USB, RS232 & EPO ports, SNMPWEBCARD option
2 independently switched load banks
NEMA L5-30P input; 8 5-15/20R & 1 L5-30R outlets
Description
Do you need to protect medium- to large-size servers, networking equipment and telecom systems against data loss, downtime and equipment
damage due to power outages, voltage fluctuations and transient surges? Tripp Lite’s SU3000XLCD SmartOnline® Tower UPS System is the
solution! Featuring a 3000VA/2700W capacity and true on-line operation with pure sine wave output and zero transfer time to battery, it provides the
highest level of power protection for mission-critical equipment. The SU3000XLCD’s large internal battery set supports connected equipment during
blackouts, and runtime is expandable with optional external battery packs (Tripp Lite model BP72V15-2U or BP72V28RT-3U), sold separately. The
SU3000XLCD has 9 AC outlets (8 5-15/20R, 1 L5-30R), including 2 load banks of 3 outlets each that are individually controllable to reboot select
equipment on demand or maximize battery runtime for mission-critical equipment. USB and DB9 communication ports support messaging of
detailed UPS operational parameters and line power status. Included PowerAlert power management software supports an unlimited number of
network UPS systems. The SU3000XLCD also accepts an optional SNMPWEBCARD accessory that enables the UPS to operate as a managed
device on the network. It comes backed by a 2-year warranty and $250,000 of Ultimate Lifetime Insurance.
Package Includes
SU3000XLCD SmartOnline® Tower UPS System
PowerAlert Software CD and Cabling
Emergency Power Off (EPO) Cabling
Owner’s Manual
Features
Ideal for Protection of Mission-Critical Equipment
The SU3000XLCD provides true on-line operation, reliable battery backup and comprehensive power management capability in a compact tower
form factor. Featuring a 3000VA/2700W capacity, 9 AC outlets (8 5-15/20R, 1 L5-30R), a 10-ft. cord with locking L5-30P plug, USB/DB9 ports and a
slot for an optional SNMPWEBCARD, the SU3000XLCD offers a complete power protection solution for medium- to large-size servers, storage
devices, telecom systems and other mission-critical equipment.
True On-Line Operation with Pure Sine Wave Output and Zero Transfer Time
The SU3000XLCD provides the highest level of protection available for mission-critical equipment. It actively converts raw incoming AC power to DC,
then re-converts it back to regulated, filtered AC output with a pure sine wave, completely isolating connected components from all power problems.
Zero transfer time between AC and battery operation maintains continuous output and further protects connected equipment from the disruptive
effects of blackouts and severe low-voltage conditions. Sine wave output guarantees compatibility with all equipment types.
Individually Controllable Outlets
The SU3000XLCD includes 2 load banks of 4 outlets each that are individually controllable via a software interface for remote reboot of locked-up

The SU3000XLCD includes 2 load banks of 4 outlets each that are individually controllable via a software interface for remote reboot of locked-up
equipment or load shedding to maximize battery backup time for mission-critical equipment.
Reliable, Expandable Battery Backup
UPS battery backup keeps connected equipment operational through short power failures, and provides time to save data and perform an orderly
system shutdown in case of a prolonged blackout. The SU3000XLCD features a large internal battery set that provides 13.2 minutes of battery
support for a half load (1350 watts) and 4.1 minutes for a full load (2700 watts). During normal operation, incoming utility power keeps the UPS
battery fully charged so that backup power will always be available if needed. For mission-critical applications demanding continuous uptime, the fully
scalable SU3000XLCD can provide expandable runtime with optional external battery packs (Tripp Lite model BP72V15-2U or BP72V28RT-3U), sold
separately.
High Power Factor and Highly Efficient Operation Reduces BTU Output
The SU3000XLCD features a high 0.9 power factor and an optional, highly efficient economy mode setting that can significantly reduce a facility’s
energy costs. In economy mode, the UPS operates with 94% efficiency, minimizing heat output, reducing cooling requirements and consuming less
electricity.
AC and Tel/Ethernet Line Surge Suppression
A sudden power surge or spike can damage or destroy electronic components and wipe out irreplaceable data. The SU3000XLCD features a
570-joule surge suppression rating to protect connected components and data from the harmful effects of power surges. One set of tel/Ethernet
(RJ45) jacks provides surge protection for a standard phone or network connection (cable not included).
EMI/RFI Line Noise Filtering
Various electrical and radio sources can cause disruptive interference on the AC line. This line noise is a common cause of incremental hardware
damage, data corruption and audio/video performance problems. The SU3000XLCD incorporates technology that filters out disruptive line noise,
preventing it from affecting your equipment.
LCD Screen and Audible Alarm
The SU3000XLCD features a front-panel LCD screen that enables IT personnel to monitor line power, on-line mode, bypass mode, on-battery,
overload, battery low, replace battery and fault status information. It is supplemented by an audible alarm that signals UPS startup, power failure, low
battery, overload, UPS fault and remote shutdown conditions.
USB/DB9 Ports, SNMP Capability and Included PowerAlert Software
The SU3000XLCD features an HID-enabled USB port and a DB9 port (cables included). Used with Tripp Lite’s included PowerAlert software, these
communication ports provide comprehensive network power monitoring and control. Capabilities include UPS and line power status messaging (on
battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity), timed inverter shutoff after unattended
shutdown, and UPS output power control for delayed or immediate reboot of connected devices. The SU3000XLCD also accepts an optional
SNMPWEBCARD accessory that enables the UPS to operate as a managed device on the network.
Emergency Power Off (EPO) Capability
The SU3000XLCD features an EPO interface port that supports emergency shutoff in large facilities (cable included).
Peace of Mind
The SU3000XLCD comes with $250,000 Ultimate Lifetime Insurance coverage for connected equipment and a 2-year warranty.
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
3000
Output kVA
capacity (kVA)
3.0

Output Watt
Capacity (watts)
2700
Output power
factor
0.9
Output Capacity
Details
ON LINE MODE: Maximum output capacity ratings are reduced for some nominal voltage settings (127/120V 2700
watts, 115V 2430 watts, 110V 2295 watts, 100V 2160 watts). FREQUENCY REGULATION / CONVERSION MODE:
Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 1890 watts, 115V 1701
watts, 110V 1607 watts, 100V 1512 watts).
Crest Factor 3:1
Nominal Output
Voltage(s)
Supported
100V; 110V; 120V; 127V
Nominal Voltage
details
120V default
Frequency
compatibility
50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion
Frequency
compatibility
details
ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output
matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds
+/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY
REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency when input is 40
to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output
is regulated to +/-0.05Hz of selected nominal.
Output voltage
regulation (line
mode)
+/- 2%
Output voltage
regulation
(Economy line
mode)
+/- 10%
Output voltage
regulation (Battery
mode)
+/- 3%
Built-in UPS
output receptacles
8 5-15/20R outlet(s); 1 L5-30R outlet(s)
Built-in
controllable
switched load
banks
Two switchable four-outlet load banks
Output AC
waveform (AC
mode)
Pure Sine wave
Output AC
waveform (battery
mode)
Pure Sine wave
INPUT
Rated input
current (at
maximum load)
24A
Nominal Input
Voltage(s)
Supported
100V AC; 110V AC; 120V AC; 127V AC
Nominal input
voltage description
120V factory default

UPS input
connection type
L5-30P
Input circuit
breaker
40A
UPS Input cord
length (ft.)
10
UPS Input cord
length (m)
3
Recommended
Electrical Service
30A 120V
Phase Single-Phase
BATTERY
Full load runtime
(minutes)
4.1 min. (2700w)
Half load runtime
(minutes)
13.2 min. (1350w)
Expandable
battery runtime
Extended runtime supported via optional external battery packs
External battery
pack compatibility
BP72V15-2U (limit 1); BP72V28RT-3U (multi-pack compatible); BP72V18-2US (multi-pack compatible)
Expandable
runtime
description
External battery configurations require the use of Tripp Lite's External Battery Configuration Software, see manual for
details
DC system voltage
(VDC)
72
Battery recharge
rate (included
batteries)
Less than 3 hours from 10% to 90%
Replacement
battery cartridge
(internal UPS
battery
replacement)
RBC96-3U
Battery Access Battery access door
Battery
replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Online, double-conversion power conditioning
Overvoltage
correction
2% output voltage regulation during overvoltages to 150
Undervoltage
correction
2% output voltage regulation during undervoltages to 55V (33% load), 70V (70% load), 100V (100% load)
LEDS ALARMS & SWITCHES
Front panel LCD
display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data,
plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options
Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Alarm cancel
operation
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
Switches 2 switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC
suppression joule
rating
570
UPS AC
suppression
response time
Instantaneous
UPS Dataline
suppression
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form
factors supported
with included
accessories
Tower
Primary form factor Tower
UPS / Power
Module
dimensions in
primary form
factor (height x
width x depth /
inches)
10.2 x 9 x 19.5
UPS / Power
Module
dimensions in
primary form
factor (height x
width x depth / cm)
25.9 x 22.9 x 49.5
UPS Shipping
dimensions
(height x width x
depth / inches)
15.2 x 13 x 24
UPS Shipping
dimensions
(height x width x
depth / cm)
38.6 x 33 x 61
Cooling method Fan
UPS housing
material
Steel
ENVIRONMENTAL
Operating
Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage
Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr.
(full load)
801

AC economy
mode BTU / hr.
(full load)
589
Battery mode BTU
/ hr. (full load)
1626
AC economy
mode efficiency
rating (100% load)
94%
Audible Noise < 51.5 dB at front side 1m
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network
monitoring port
description
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure
communications
PowerAlert
software
Included
Communications
cable
USB and DB9 cabling included
WatchDog
compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time Zero transfer time (0 ms.) in online, double-conversion and frequency regulation / conversion modes;
Low voltage
transfer to battery
power (setpoint)
55V (33% load), 70V (70% load), 100V (100% load)
High voltage
transfer to battery
power (setpoint)
150
SPECIAL FEATURES
Cold Start (startup
in battery mode
during a power
failure)
Cold-start operation supported
High availability
UPS features
Automatic inverter bypass; Hot swappable batteries
Green & high
efficiency features
High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy
mode operation
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Connected
Equipment
Insurance (U.S.,
Canada & Puerto
Rico)
$250,000 Ultimate Lifetime Insurance

Related Items
Optional Products
Related Model Description Qty.
WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack
models, 2200-3000VA
1
WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack
models, 2200-3000VA or less
1
SNMPWEBCARD For remote monitoring and control via SNMP, Web or Telnet 1
ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires UPS with
SNMPWEBCARD, monitored PDU or switched PDU.)
1
SRSWITCH Magnetic Door Switch Kit for front and rear doors; requires ENVIROSENSE 1
MODBUSCARD For remote monitoring and control via MODBUS protocol 1
RELAYIOCARD Programmable Relay I/O Card 1
BP72V15-2U BP72V15-2U - External Battery Pack for UPS System 1
BP72V28RT-3U BP72V28RT-3U - External Battery Pack for UPS System 1
P006-003 3-ft. 18AWG Power cord (NEMA 5-15P to IEC-320-C13) 1
P006-004 4-ft. 18AWG Power cord (NEMA 5-15P to IEC-320-C13) 1
P006-004-BL 4-ft. 18AWG Power Cord (NEMA 5-15P to IEC-320-C13) with Blue Connectors 1
P006-004-GN 4-ft. 18AWG Power Cord (NEMA 5-15P to IEC-320-C13) with Green Connectors 1
P006-004-RD 4-ft. 18AWG Power Cord (NEMA 5-15P to IEC-320-C13) with Red Connectors 1
P006-004-YW 4-ft. 18AWG Power Cord (NEMA 5-15P to IEC-320-C13) with Yellow Connectors 1
P006-006 6-ft. 18AWG Power cord (NEMA 5-15P to IEC-320-C13) 1
P044-06I 6-inch 12AWG Heavy Duty Power Adapter cord (NEMA-L5-20R to NEMA-5-20P) 1
P049-010 10-ft. 12AWG Heavy Duty Power cord (IEC-320-C19 to NEMA 5-20P) 1
P041-001-2 1-ft. 10AWG Heavy Duty Power Splitter Cable (NEMA L6-30P to 2x NEMA L6-30R) 1
PDUB30 Single-Phase Hot-Swap PDU, 30A 120V, 2U Horizontal Rackmount, 6 NEMA 5-15/20R
and 1 NEMA L5-30R outlets, 2 NEMA L5-30P inputs
1
PDU2430 Single-Phase Basic PDU, 30A 120V, 1U Horizontal Rackmount, 24 NEMA 5-15R outlets,
NEMA L5-30P input plug
1
PDUMH30 Single-Phase Metered PDU, 30A 120V, 1U Horizontal Rackmount, 12 NEMA 5-15/20R
outlets, NEMA L5-30P input plug
1
PDUMH30AT Single-Phase Auto Transfer Switch / Metered PDU, 30A 120V, 2U Horizontal mount, 24
5-15/20R & 1 L5-30R outlets, 2 L5-30P inputs
1
PDUMH30ATNET Single-Phase Auto Transfer Switch / Switched PDU, 30A 120V, 2U Horizontal mount, 24
5-15/20R & 1 L5-30R outlets, 2 L5-30P inputs
1
PDUMNH30 Single-Phase Monitored PDU, 30A 120V, 2U Horizontal Rackmount, 16 5-15/20R outlets,
L5-30P input
1
PDUMH30NET Single-Phase Switched PDU, 30A 120V, 2U Horizontal Rackmount, 16 NEMA 5-15/20R
outlets, NEMA L5-30P input plug.
1
PDUMNV30 Single-Phase Monitored PDU, 30A 120V, 0U Vertical Rackmount, 24 NEMA 5-15/20R
outlets, NEMA L5-30P input plug
1
PDUMV30 Single-Phase Metered PDU, 30A 120V, 0U Vertical Rackmount, 24 NEMA 5-15/20R
outlets, NEMA L5-30P input plug
1
PDUMV30NET Single-Phase Switched PDU, 30A 120V, 0U Vertical Rackmount, 24 NEMA 5-15/20R
outlets, NEMA L5-30P input plug
1

PDUMVR30NET Single-Phase Switched PDU with outlet level metering, 30A 120V, 0U Vertical
Rackmount, NEMA 5-15/20R outlets, NEMA L5-30P input
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=5342.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.