TRIUMPH BOARD LiftBox 650 User manual

LiftBox ®650
Installation manual
LiftBox®650
Contact us at:
[email protected]
www.triumphboard.com
www.youtube.com/user/triumphboard
EAN: '8592580082757
7 8
9
Set the balance, use a drill-driver with a 13 mm socket on 2 outer springs marked green
Drive counter clockwise 5 seconds each until balanced
Mount wall frame covers and
Application cover (optional) Mount the touchscreen, use LiftBox accessories

LiftBox®650
1 2
3
5
4
6
Remove application cover (optional) Remove wall-frame covers Lift LiftBox on wall bracket, mark top
holes. Take LiftBox down and drill holes Fix LiftBox at the top. Then level and fix at the bottom
Remove wall bracket Mount bottom wall bracket level to the wall
Safety warnings, contents of the box, tools needed
Mounting height
calculator on:
www.triumphboard.com
→
*Fasteners not included
Choose based on type of wall
Use 4x 8mm
(Not included)