Triumph SP12 User manual

Triumph SP12 Syringe
Pump Quick Start Guide This guide provides a quick
reference on operating the
Triumph SP12 Syringe Pump.
Please refer to the Triumph SP12
Syringe Pump user manual @
WWW.TR UMPHMED.COM for
detailed operation and settings.

Pole/Cage Clamp
Instructions for
use
Install Pole/Cage Clamp on back of pump ith provided hex
rench and bolt. Ability to install vertically or horizontally. (See
Figure A and B)
If attaching to cage it is necessary to install vertically ith “split”
side of clamp on the top. Also necessary to have clamp handle all
the ay out (see figure C)
Figure A Figure B Figure C

Press and Hold Po er Button for 2 Seconds to Po er on
Select “Yes” or “No” to Clear last treatment. Selecting “Yes “ ill clear all infusion parameters
from previous infusion. If no selection is made ithin 30 seconds all parameters are cleared
automatically
Pull out barrel clamp and rotate either direction. Squeeze Plunger Handle and slide out to the
right.
Install Syringe ensuring Syringe flange is inserted fully in to flange holder, turn barrel clamp to
secure syringe, engage plunger holder to Syringe plunger, and confirm correct Brand and Size
Select Infusion Mode, Set Infusion Parameters, purge if necessary, and verify settings
Press Start
Basic
Operation
Syringe Brand
VTBI (Volume To Be Infused)
Time for Infusion
Infusion Rate Syringe Size Screen Lock/Unlock Battery Capacity
Start Infusion
Purge
Menu/Settings
Infusion Mode Volume Infused
Plunger Handle
Flange Holder
Barrel Clamp

During
Infusion
Interface
Programmable Bolus
Occlusion
Pressure
Indicator
AC Po er Indicator
Alarm Indicator
Po er Button
Current
Infusion
Rate
Manual Bolus
Settings
Volume InfusedTime Left for Infusion
Completion
VTBI Volume to Be Infused
Start/Stop Infusion
Syringe
Size
Syringe Brand/Alarm
Touchscreen
Lock/Unlock Battery
Indicator

Infusion
Modes
To Access Modes Press The Bottom of Home Screen or Select Menu
then Modes
Rate Mode: Set VTBI and Rate (ml/hr)
VTBI Range : 0.01 - 9999.99 ml
Time Mode: Set VTBI and Time
VTBI Range: 0.01 - 9999.9 ml
Time Range: 0 – 99 Hours 59 Mins
Body-Weight Mode: Select Unit, Enter Body Weight,
Concentration, Dose, VTBI
Dose Rates: mcg/min, mcg/hr, mcg/kg/min, mcg/kg/hr, mg/min, mg/h, mg/kg/min, mg/kg/h plus more
available
Drug Library Mode: Select Drug, Enter Concentration, Dose Rate,
Weight
Drug library is editable by going to settings – Drug Library – DrugLib maintenance – Enter Pass ord 8888 -
options to edit drugs and change pass ord
Syringe Size Rate Range ml/hr
3ml 0.1-100
5/6ml 0.1-150
10/12ml 0.1-300
20ml 0.1-600
30/35ml 0.1-900
60ml 0.1-1500

Purge: While pump is idle Press Purge on screen and select Yes or
Press and Hold the Purge Softkey. (see Figure 1)
Programmed Bolus: During infusion Press Bolus on screen and set
Bolus VTBI, Bolus rate, Bolus time, and then select start (see
Figure 2 and Figure 3)
Manual Bolus: During infusion press and hold Bolus softkey (see
Figure 2) - Audible tone every 1 ml bolus infused
To change default Manual Bolus rate: hile pump is idle go to
Menu, Settings, then select Bolus rate. (see Figure 4)
Bolus/Purge
Operation
Manual Bolus
(Bolus Softkey)
Programmable
Bolus
Syringe Size Bolus Rate
Range ml/hr
3ml 0.1-100
5/6ml 0.1-150
10/12ml 0.1-300
20ml 0.1-600
30/35ml 0.1-900
60ml 0.1-1500
Purge
Figure 3Figure 1
Figure 2 Figure 4

Settings
To Enter additional Settings Select the Menu button on Touchscreen
or Softkey hile pump is idle
Modes: Change current Infusion Mode
Settings: Change current Syringe Brand, drug library, default KVO
Rate (0.01 ml/hr – 5.0 ml/hr), default Manual Bolus rate, Occlusion
Pressure (3 Levels 300 mmhg – 900 mmhg), Pump idle alert time,
Almost empty alarm, Micro Mode.
General: Change Date & Time, Screen Brightness, Sound Level,
Screen Lock time, Night Mode, and Battery Capacity Indicator
Records: Recall History of alarms, and recent therapies
System: Change Language, Factory default, Version, and
Maintenance
Home: Go back to Home screen
Standby Mode: To Access Standby
Mode press Po er button, select
Standby and enter standby time