13
Problem: Controller does not work.
Cause: The power switch is turned
“OFF”.
Solution: Turn the power switch “ON”.
Cause: The batteries have been
wrongly inserted.
Solution: Check if the batteries
have been correctly inserted.
Cause: The batteries do not have
enough power.
Solution: Insert new batteries.
Problem: The drone cannot be
controlled with the controller
Cause: The power switch on the
controller is turned “OFF”.
Solution: First turn the power switch
on the controller “ON”.
Cause: The controller is possibly
not correctly frequency bound with
the receiver on the drone.
Solution: Please carry out the
binding procedure as described in
“Flying Your Drone”.
Problem: The drone does not lift.
Cause: The rotor blades rotate
too slowly.
Solution: Push the throttle up.
Cause: The battery’s power is
not sufcient.
Solution: Charge the battery (see
chapter “Getting Started / Charging”).
Problem: During ight, the drone loses
speed and height without any
obvious reason.
Cause: The battery is too weak.
Solution: Charge the battery (see
chapter “Getting Started /Charging”).
Problem: The drone only ies in a
circle or turns over on starting.
Cause: Rotor blades incorrectly
tted or damaged.
Solution: Fit rotor
blades/replace rotor blades (see
chapter “Replacing Rotor Blades”).