Trotec Speedy 300 flexx User manual

Speedy 300 flexx
Operating manual
S300-X8066
OM S300-X8066_2.22_EN (01/2022)
ENGLISH (Translation)


Trotec Laser GmbH
[phone]
[e-mail]
Trotec Laser Pty Ltd
[phone]
[e-mail]
Trotec Laser België
Trotec Laser Belgique
[phone]
[e-mail]
Trotec Laser Canada
[phone]
[e-mail]
Trotec Laser AG
[phone]
[e-mail]
[e-mail]
Trotec Laser GmbH
[phone]
[e-mail]
Trotec Laser Deutschland GmbH
[phone]
[e-mail]
Trotec Laser España
[phone]
[e-mail]
Trotec Laser France SAS
[phone]
[e-mail]
Trotec Laser UK
[phone]
[e-mail]
Trotec Laser Srl
[phone]
[e-mail]
Trotec Laser Japan Corporation
Tokyo: [phone]
Osaka: [phone]
[e-mail]
High Speed Laser Systems S. de
R.L. de C.V.
[phone]
[e-mail]
Trotec Laser B.V.
[phone]
[e-mail]
Trodat Polska Sp. z o.o.
[phone]
ser[email protected]
Trotec Laser Inc.
[phone], Option 2
[e-mail]
Rubber Stamp & Engraving
[phone]
[email protected].za
Trotec Laser (XIAMEN) CO., LTD.
#5 GuAn Road South, MaXiang
Town
XiangAn District, XiaMen, China
2


Trotec Laser GmbH
Freilingerstraße 99
4614 Marchtrenk, Austria
General contact to Technical Support:
Tel.: [phone]
E-mail: [e-mail]
WWW.TROTECLASER.COM
3


Technical Changes Technical specifications are subject to change without notice.
Trotec Laser GmbH reserves the right to improve or modify any of the products without prior
notice.
© Copyright This documentation with all illustrations is intellectual property of Trotec Laser GmbH. The
entire documentation is given to the user for personal use only. Reproduction, translation or any
distribution to third parties is not permitted without the prior consent of Trotec Laser GmbH. Any
breach of law will be prosecuted.
4

Content
Content
1 General Information....................................................................................................... 8
1.1 Information about this manual................................................................................................................................. 8
1.2 Explanation of symbols...............................................................................................................................................8
1.3 Liability and warranty..................................................................................................................................................9
1.4 Scope of delivery (standard configuration).......................................................................................................... 10
1.4.1 Accessory box.......................................................................................................................................................... 10
1.5 Type plate.....................................................................................................................................................................11
2 Safety........................................................................................................................... 12
2.1 General safety notes.................................................................................................................................................. 12
2.1.1 Intended use............................................................................................................................................................ 12
2.1.2 Improper use............................................................................................................................................................13
2.1.3 Residual risk............................................................................................................................................................. 13
2.1.4 Machine modification............................................................................................................................................ 13
2.1.5 Operating modes.................................................................................................................................................... 13
2.1.6 Applicable safety regulations............................................................................................................................... 14
2.2 Laser safety.................................................................................................................................................................. 15
2.2.1 Laser classification..................................................................................................................................................15
2.3 Areas of responsibility............................................................................................................................................... 16
2.3.1 Responsibilities of the operating company...................................................................................................... 16
2.3.2 Responsibilities of the operating personnel..................................................................................................... 17
2.4 Requirements for operating an service personnel..............................................................................................18
2.5 Warning and information labels............................................................................................................................. 18
2.6 Safety devices..............................................................................................................................................................20
2.7 Technical protective measures................................................................................................................................20
2.7.1 Main switch...............................................................................................................................................................20
2.7.2 Key switch.................................................................................................................................................................20
2.7.3 Emergency stop button.........................................................................................................................................20
2.7.4 Interlock safety switches....................................................................................................................................... 21
2.7.5 Acrylic top lid........................................................................................................................................................... 21
2.7.6 Side cover................................................................................................................................................................. 21
2.7.7 Temperature sensor............................................................................................................................................... 21
2.7.8 In case of safety device malfunction.................................................................................................................. 21
2.8 Secondary (indirect) hazards................................................................................................................................... 22
2.8.1 Fire hazard................................................................................................................................................................22
2.8.2 Gases, fumes and dust.......................................................................................................................................... 22
2.8.3 Reflection through materials................................................................................................................................23
5

Content
2.8.4 Information about damaged optics....................................................................................................................24
2.8.5 Protective measures for damaged optics..........................................................................................................24
2.9 In case of emergency.................................................................................................................................................25
3 Technical Data.............................................................................................................. 26
3.1 Dimensions and weight............................................................................................................................................ 26
3.2 Computer requirements............................................................................................................................................26
3.3 Electrical requirements of the machine................................................................................................................ 26
3.4 Exhaust system requirements..................................................................................................................................27
3.5 List of materials.......................................................................................................................................................... 30
4 Machine overview.........................................................................................................34
4.1 Tables (multifunctional table concept)..................................................................................................................35
4.2 Lens(es).........................................................................................................................................................................36
5 Transport...................................................................................................................... 37
5.1 Safety notes................................................................................................................................................................. 37
5.2 Delivery state............................................................................................................................................................... 37
5.3 Temperature and humidity...................................................................................................................................... 38
5.4 Required tools for unloading and transport.........................................................................................................39
5.5 Place of storage.......................................................................................................................................................... 39
5.6 Transport inspection and reporting of defects....................................................................................................39
5.7 Unpacking the machine............................................................................................................................................39
5.8 Relocation of the machine.......................................................................................................................................40
6 Setup and installation.................................................................................................. 42
6.1 For your safety............................................................................................................................................................ 42
6.2 Temperature and humidity...................................................................................................................................... 42
6.3 Space requirements...................................................................................................................................................43
6.4 Setup............................................................................................................................................................................. 43
6.5 Connections.................................................................................................................................................................44
6.5.1 Mains connection....................................................................................................................................................44
7 Connection of additional components..........................................................................45
7.1 Exhaust system............................................................................................................................................................45
7.2 Chiller............................................................................................................................................................................ 46
8 Operation..................................................................................................................... 47
8.1 Before commissioning...............................................................................................................................................47
8.2 Power On/Off...............................................................................................................................................................47
8.3 Control panel and keypad........................................................................................................................................49
8.4 Keypad.......................................................................................................................................................................... 50
8.5 Keypad.......................................................................................................................................................................... 51
8.6 Description...................................................................................................................................................................52
8.7 Shortcuts...................................................................................................................................................................... 54
6

Content
8.8 Lense placement........................................................................................................................................................ 56
8.9 Switch laser source manually..................................................................................................................................58
8.10 Focusing methods......................................................................................................................................................58
8.10.1 Light barrier focus...................................................................................................................................................60
8.11 Options..........................................................................................................................................................................61
8.11.1 Rotary attachment.................................................................................................................................................. 61
8.11.2 Rotary engraving process......................................................................................................................................62
8.11.3 Installation and commissioning.......................................................................................................................... 63
8.11.4 Mounting the work piece in the rotary attachment........................................................................................ 63
8.11.5 Temperature sensor............................................................................................................................................... 64
8.11.6 Trotec Vision Print&Cut..........................................................................................................................................65
9 Maintenance................................................................................................................. 66
9.1 Safety notes................................................................................................................................................................. 66
9.2 Maintenance schedule.............................................................................................................................................. 66
9.3 Cleaning........................................................................................................................................................................67
9.3.1 Machine.....................................................................................................................................................................67
9.3.2 Optics in general..................................................................................................................................................... 67
9.3.3 Lens............................................................................................................................................................................ 68
9.3.4 Cleaning the mirrors...............................................................................................................................................69
10 Troubleshooting........................................................................................................... 70
10.1 Error, cause and remedy...........................................................................................................................................70
11 Contact details..............................................................................................................72
12 Disassembly..................................................................................................................73
13 Disposal........................................................................................................................74
14 Appendix...................................................................................................................... 75
14.1 Dok IIIR..........................................................................................................................................................................78
15 8066 Speedy 300X.........................................................................................................79
16 CE 8066 Speedy300_flexx DE_EN.................................................................................. 82
7

General Information
1 General Information
For the sake of readability, gender-neutral endings are not used in this operation manual. It is hereby expressly stated
that all parts of the text where natural persons or groups of persons are mentioned refer to people of all genders.
1.1 Information about this manual
Before beginning any work on the machine, read this manual completely and carefully.
Keep the manual for further consultation close to the machine.
This manual describes how to operate the machine properly and safely. Be sure to follow the safety instructions given
here, as well as any local accident prevention regulations and general safety regulations applicable to the field of
usage. Before beginning any work on the machine, ensure that the manual, in particular the chapter entitled "Safety
Information" and the respective safety guidelines, has been read in its entirety and fully understood.
Information
Supplementary documentation can be found on the supplied storage medium. You can also request this
from the manufacturer.
1.2 Explanation of symbols
Important technical safety notes and instructions in this manual are indicated by symbols. It is important to observe
and follow these notes and instructions on workplace safety. Avoid accidents, personal injury and material damage to
property by acting with extreme caution.
Danger
This symbol indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Warning
This symbol indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Warning Current
This symbol warns of potentially dangerous situations related to the electric voltage. Failure to observe
the safety instructions leads to risk of serious injury or death. Particular care should be taken during
maintenance and repair work.
Warning Laser
This symbol warns of potentially dangerous situations related to the laser beam. Failure to observe the
safety instructions leads to risk of serious injury.
8

General Information
Caution
This symbol indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury.
Notice
This symbol indicates potential risks of damage to the supported product (or to property).
In addition, non-observance may result in damage, malfunction or failure of the machine.
Information
This symbol indicates tips and information which must be observed for efficient and trouble-free handling
of the product.
Disposal
This symbol indicates notes regarding the professional disposal of the product or accessories.
1.3 Liability and warranty
Warranty periods specified in the manufacturers "warranty terms and conditions" shall be binding for the buyer. If no
warranty periods are specified, the general terms and conditions of sale, delivery and payment apply.
All information, illustrations, tables, specifications and diagrams contained in this operating manual have been carefully
compiled according to the current state of technology. No liability is accepted with regard to errors, missing information
and any resulting damage or consequential loss.
Strict compliance with the safety procedures described in this operating manual and extreme caution when using
the equipment are essential for avoiding and reducing the possibility of personal injury or damage to the equipment.
The manufacturer shall not be liable for any damage and or faults resulting from nonobservance of instructions in this
manual.
Nonobservance of the operation, maintenance and service instructions described within this manual absolves Trotec
Laser GmbH from any liability in case of a defect.
Furthermore, Trotec Laser GmbH shall accept no liability whatsoever for damage caused by the use of non-original parts
and accessories.
Additionally, Trotec Laser GmbH shall not be held responsible for any personal injury or property damage, of an indirect
or specific nature, consequential loss, loss of commercial profits, interruption to business, or loss of commercial
information resulting from use of the equipment described in this manual.
It is strictly prohibited to make any alterations, to prepare translations, decompile, disassemble, reverse engineer or
copy the soware.
Trotec Laser GmbH reserves the right to update any of the information, illustrations, tables, specifications and diagrams
contained in this operating manual with regard to technical developments at any time without notice.
9

General Information
1.4 Scope of delivery (standard configuration)
–Laser machine
–Stand (optional)
–Storage medium (includes manuals)
–Focusing tool(s) (according to lens order)
–Cleaning kit for optics
–Lenses according to order
–Allen key kit (8-part)
–Power cable (acc. to order)
–USB computer connection cable
–Exhaust connection cable (acc. to order)
The actual scope of delivery may be different, depending on the special model, additional order options or newest
technical changes.
1.4.1 Accessory box
•Lens Tissue (100pcs)
•Nozzles (ø3 und ø7 mm)
•Standard lens CO2 2.0” / flexx 2.85”
when 50W fiber then 3.2” fiber lens additionally
•USB cable 3m
•Storage medium
•Allen key kit
•Speedy Series Quick reference guide
•Safety- and Maintenance guide
•Ruby® Quick Start Guide
10