Truke Fit 2 User manual
trüke Fit 2 User Manual
Product Description
Welcome to use trüke Fit 2 - True Wireless Stereo Bluetooth Headset!
This product adopts the industry's advanced single-chip solution, with excellent sound
quality and simple operation, which will bring different surprises to your life, work and
journey.
You can split it into a single ear (mono) to make a call or listen to the mobile phone
navigation tone when you are driving or riding, so that the journey is safe and
worry-free.
It can also be used in pairs (stereo) to enter the wonderful world of music.
General Functions & Operations
Power on
Press/Touch and hold the button for 2 seconds to turn it on, the red and blue lights
flash.
Headset Pairing
1. Headset will automatically start & pair when it is taken out from the charging
Case;
2. Connected Tone is played when headset and mobile phone connect successful;
3. Disconnected Tone is played when headset and mobile phone is disconnected.
Power off
Headset turns off automatically when headset is placed into the charging case;
Turning off one headset does not affect the operation of the other headset;
Both headsets turn off, when any headset is pressed for more than 5 seconds;
Operating
language
English
Bluetooth
name trüke Fit 2
Play / Pause Press/Touch the headset button
Call answering Press/Touch the headset button
Disconnect
incoming call Press/Touch and hold the headset button for 2 seconds
Automatic
redial function
Double Press/Touch Right headset button to call back the last call
Headset
Remaining
Battery
Headset Remaining Battery will be displayed on supported mobile device
Troubleshooting
1. Unable to start
Charge the headset for 30 minutes and then turn it on;
2. Headsets Cannot Pair
Turn off the Bluetooth function of the phone before pairing the headset;
Shut down and Power on the headsets, the devices will automatically pair;
3. Cannot Connect to Mobile Device
Restart the Mobile Device Bluetooth function
4. Headsets can't be Charged
The Charging Case Battery is low; Connect and charge the Charging Case.
Performance Parameters
Model Number B087 Charging input 5V 1A
Bluetooth version 5.0 Operating Voltage 3.7V
Talk-Time 4 hours* Headphone Battery 50mAh 3.7V
Music Playback Time 5-8 hours* Charging Case Battery 450mAh 3.7V
Standby duration 3 months Charging Interface Micro USB
Net weight 41 grams Charging time 90Mins*
Waterproof Level Splashproof Dimension 91×40×33mm
*Talk-Time, Music Playback & Charging Time are mentioned under ideal lab conditions.
Under daily usage, actual time may vary.
Low Battery
Prompt Red LED starts flashing when voltage is lower than 3.2v
Previous & next
song
Previous song: Press/Touch left headset for 2 seconds;
Next song: Press/Touch right headset for 2 seconds;
Volume
adjustment Not Supported through Headset
Charging
indication
Headset Charging: The red light of Headset is always on while charging.
When the battery of headset is fully charged, the red light of headset goes off;
Charging Case: During the charging process of the Charging Case, the white light of
the Charging Case lights up from left to right in turn.
When the Charging Case Battery is fully charged, the white light turns always on;
Precautions
1. Do not use this product under high temperature, high humidity, high cold, high dust,
high electromagnetic radiation and lightning environment;
2. Do not use non-original charging accessories to charge;
3. Charging time should not exceed 3 hours;
4. Recharge every 30 days when not in use for a long time;
5. Do not exceed 60 decibels when used for a long time to avoid hearing damage;
6. Do not disassemble by any unauthorized personnel, otherwise warranty will be void;
7. After the product has expired, it can be sent to a professional recycling agency. Do not
discard it at will, so as not to pollute the environment;
Customer Care:
For any queries/complaints, pls feel free to contact us on +91-9354170767
Or
Thank You
Table of contents
Other Truke Headphones manuals
