Trust SP-6600A User manual

SP-6600A 5.1 SURROUND SPEAKER SET
1
UK
Product information
A: Display
B: Subwoofer
C: Centre speaker
D: Surround speakers
E: Remote control
F: 5.1 cable
G: DIN connection cable
H: DVD cable (x3)
I: Stereo cable
J: Game console cable
K: Stereo or 5.1 indicator
L: On/Off button
M: LED display – displays the speakers
N: Volume indicator
O: IR receiver
P: Power button
Q: Volume of the individual speaker groups
R: Choice between 5.1 and stereo input
S: Mute function
T: System volume
U: Battery compartment
Connecting the display to the subwoofer
1 Use the cable (G) to connect the display to the subwoofer.
Connect the subwoofer’s DC-out cable to the display’s (A) DC-in connection.
Connecting to a PC/MP3 player
2
Use the 5.1 cable (F) to connect a PC to the display (A).
Use the jack-jack cable (I) to connect an MP3 player to the display (A).
Continue from point 6to connect the speakers.
Connecting a DVD player
3
Connect the DVD cables (H) to the DVD player.
Connect the 5.1 cable (F) to the front: Green, rear: Black and centre/sub: Orange connections on the
display (A).
Continue from point 6to connect the speakers.
Connecting a game console
4
Connect the game console cable (J) to a game console.
Connect the stereo cable (I) to the display’s (A) stereo-in connection.
Continue from point 6to connect the speakers.
Connecting the speakers and the power supply
5 Connect the front, rear and centre speakers to the subwoofer (B).
6 Insert the plug into a plug socket.
7 Turn the speaker set on.
Selecting stereo/5.1 sound
8 Stereo mode: in the stereo mode, the sound is divided between all the speakers and the indicator is
red.

SP-6600A 5.1 SURROUND SPEAKER SET
2
9 5.1 mode: all the speakers are controlled independently and the indicator is green.
Configuring 5.1 speakers in Windows XP
10 Click ‘Start – Run’.
11 Type ‘mmsys.cpl’ and click ‘OK’.
12 Click “Advanced’.
13 Select ‘5.1 Surround Sound Speakers’ and click ‘OK’.
General information
• For the best sound quality, the subwoofer must be placed on the ground. Do not place it
next to a computer monitor or a TV.
• If the subwoofer and centre speakers are switched over, change the cinch plugs on the
DVD player for the centre speaker and the subwoofer or enable the sound card’s
Sub/Centre swap.
Energy
• The device will enter the energy saving mode when it is not used for 10 seconds. To save energy,
turn the device off after use.
• If the remote control does not work or works erratically, replace the battery with a new CR2025
battery.
Troubleshooting
• Sound cannot be heard from any of the speakers.
- Check whether the cables have been connected correctly.
- Check whether the 5.1 mode has been selected.
- Configure 5.1 speakers in Windows.
- Configure 5.1 speakers in the DVD player software.
Go to http://www.trust.com/14479 for up-to-date FAQs, drivers and instruction manuals.
Safety instructions
• This device can produce a sound of a high volume. Always increase the volume slowly.
• Never open or repair this device yourself.
• Do not swap cables whilst the device is turned on.
• Do not use the device in a damp environment. Clean the device with a dry cloth.
• Make sure nothing is placed on the cable. Do not use this device where the cable can become
worn or damaged as a result of people walking over it.
• Under the following circumstances, remove the plug from the wall socket and have the device
repaired by qualified personnel:
- The cable or plug is damaged.
- The device has been dropped or the casing is damaged.
- The device does not work correctly.

SP-6600A 5.1 SURROUND SPEAKER SET
3
UK
• This device meets the essential requirements and other relevant conditions of the applicable
European directives. The Declaration of Conformity (DoC) is available at
http://www.trust.com/14479/ce.
Warranty & copyright
• This device has a two-year product warranty which is valid from the date of purchase. Go to
www.trust.com/warranty for more information.
• It is forbidden to reproduce any part of this instruction manual without the permission of Trust
International B.V.