TSI Instruments 4199 Operation manual

FLOWMETER BATTERY
PACK AND STAND
TSI®MODEL 4199
OPERATION AND SERVICE MANUAL
1980504, REVISION D
FEBRUARY 2016

TSI Incorporated –Visit our website www.tsi.com for more information.
USA Tel: [phone]
UK Tel: [phone]
France Tel: [phone]
Germany Tel: [phone]
India Tel: [phone]
China Tel: [phone]
Singapore Tel: [phone]
P/N 1980504 Rev D ©2016 TSI Incorporated Printed in U.S.A.
*1980504*
This battery pack works with the TSI Series 4000
and 4100 Flowmeters that have LCD displays.
Flowmeters manufactured before August 2004 will
not indicate low battery. For those meters, the meter
will work properly until the display locks up; replace
batteries at that time.
List of Components
1 - Battery pack
2 - 4100 Series lugs
2 - 4000 Series lugs
6 - AA batteries
Installation
Screw in both lugs to back side of flowmeter (the
front being the display). 4000 and 4100 series
flowmeters require different size lugs. Line up lugs
with the holes on top of the battery pack. Press one
lug in at a time. Attach cable to flowmeter.
Removal
Unplug power cable and then rotate the bottom of
the meter away from the battery pack until lugs
disengage from battery pack.