TSI Instruments 5300 Series User manual

_____________________
TSI and TSI logo are registered trademarks of TSI Incorporated.
QUICK START GUIDE
LOW PRESSURE MEASUREMENT KIT
5300 SERIES
P/N 6011710, REV. B
APRIL 2019
5300 Series Low Pressure Measurement Kit (5300-LPMK)
Components
Item
Description
Qty.
Picture
1
22-mm (M/F) Airway
Pressure Fitting with
Screen
2
2
1/8 inch ID x 1/4 inch OD
Tubing
96 in.
❶
❷

–2–
Assembly
Standard Setup: 22-mm ISO Tube Ends
1. Attach the 22-mm Airway Pressure Fitting to the outlet
side Tube End of the 5300 Series Instrument with the
barb facing up.
2. Measure and cut a length of tubing and connect it from
the Airway Pressure Fitting barb to the (+) port on the
Multi-Meter.

–3–
Assembly
Alternative Setup: 15 mm, 3/4inch or 1/2 inch Tube Ends
1. Remove tube ends from the
meter then screw the collars
back on.
2. Insert the Airway Pressure
Fitting into the outlet side of the
Multi-Meter in the inverted
direction with the barb facing up.
3. Measure and cut a
length of 1/8ID x
1/4 OD tubing and
connect it from the
Airway Pressure
Fitting barb to the (+)
port of the Meter.

TSI Incorporated –Visit our website www.tsi.com.
P/N 6011710 Rev B ©2019 TSI Incorporated
4. Insert the Inlet Filter–
Low Pressure (supplied
in Std Accessory Kit)
into the inlet side of the
Multi-Meter in the
inverted direction.
5. Insert alternative Tube Ends into the inlet of the Filter
and into the outlet side of the Airway Pressure Fitting.