TUHOME Furniture ST. CLAIRE User manual

If any parts are broken or missing please contact us at:
1-888-391-01-66 / [email protected]
Our customer service team will provide you help
to resolve any issues immediatly
ST. CLAIRE LINEN CABINET
ASSEMBLY INSTRUCTIONS
It’s much better if you get some company for this!
LOT N°
FURNITURE

2
Index
Hi! my name is
Armando, and I’ll be
with you while you
assemble this cabinet.
What will you need?
Where should you start?
What’s in the hardware bag?
Let’s start assembling!
Our last recommendations for taking care of your cabinet
2
3
How much weight does your cabinet resist?
How do the dowels and Minifix system work?
(We also explain what they are)
4
5
6
23
24
What will you need?
A flat, smooth surface. You can use the
cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it
can make the work much easier :)
Phillips head screwdriver Flat head screwdriver
Hammer

3
Where should you start?
(When the cabinet is already assembled
there’s no warranty for this)
This is so IMPORTANT!
Over the next few pages is the
panel and hardware content for this
cabinet.
Please make sure that the quantity
of each one is correct, and that
everything is in good shape.
A - x1
B - x1
C - x1
D - x1
E - x1
F - x1
G - x1
H - x5
I - x1
J - x1
K - x1
L - x1
M - x1
N - x1
O - x1
P - x1
DOOR
T - x1
U - x2
Panel quantity

4
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its
content is necessary for assembling your cabinet.
x37
Wood dowel
x60
Minifix cam
Spreading bolt
x60
Cover caps
x62
In case something is missing, please call to our
customer service line:
1-888-391-01-66
Nail-on glide
x4
x8
Drywall
screw
2"
Shelf
support
x1 x2
Hinge +
screws
x1
Knob
x2
Wall Fixing Kit
+ Screws
x1
Handle Screw

5
How do the dowels and Minifix system work?
Wood dowels
this is so important too!
They are little wooden cylinders.
1Put in the dowel
inside the indicated
hole and softly hit it
until it’s fully inside.
Everytime you’re using one of these
connectors during the assembly, you
should follow these same steps.
2When joining two
panels together, don’t
forget to gently hit
the panels to adjust
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
2You should insert these cams
with the little arrow pointing
towards the drilling on the
panel’s edge (shown on the
left).
3This is a spreading bolt.
You should put it with the
black plastic part facing down.
4After joining two panels
together you should turn the
cams 180° with a phillips
head screwdriver to adjust
and secure the joint.
1This is a Minifix cam.
It has a little arrow on its
upper surface.
small arrow

6
Let’s start assembling!1
2
You can see the last page of this manual to have
a full look of the panels of this cabinet.
K
I

7
3
4
F
K
I
F

8
5
6
H x 5
P9
A
Turn this
panel over

9
7
A
H
A

10
8
9
C
A
H
H
C
K
IF
H