TUHOME Furniture NORA LIFT TOP MLC 6256 User manual

If any parts are broken or missing please contact us at:
1-888-391-01-66 / [email protected]
Our customer service team will provide you help
to resolve any issues immediatly
NORA LIFT TOP COFFEE TABLE
ASSEMBLY INSTRUCTIONS
It’s much better if you get some company for this!
LOT N° REF./SKU. MLC 6256
FURNITURE

2
Index
Hi! my name is
Armando, and I’ll be
with you while you
assemble this cabinet.
What will you need?
Where should you start?
What’s in the hardware bag?
Let’s start assembling!
Our last recommendations for taking care of your cabinet
2
3
How much weight does your cabinet resist?
How do the dowels and Minifix system work?
(We also explain what they are)
4
5
6
13
14
What will you need?
A flat, smooth surface. You can use the
cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it
can make the work much easier :)
Phillips head screwdriver Flat head screwdriver Rubber hammer
Hammer

3
Where should you start?
(When the cabinet is already assembled
there’s no warranty for this)
This is so IMPORTANT!
Over the next few pages is the
panel and hardware content for this
cabinet.
Please make sure that the quantity
of each one is correct, and that
everything is in good shape.
A - x1
B - x1
C - x1
D - x1
E - x1
F - x1
G - x1
Panel quantity

4
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its
content it’s neccesary for assembling you cabinet.
x28
Wood dowel
x19
Minifix cam
Spreading bolt
x19
Cover caps
x20
x1
Glue
Flat head
screw
x28
In case something is missing, please call to our
customer service line:
1-888-391-01-66
x5
Bumpons
x2
Legs
x1
Folding Arm

5
How do the dowels and Minifix system work?
Wood dowels
this is so important too!
They are little wooden cylinders.
1
Before inserting the
dowel, put a drop of
glue inside the drilling.
2
Put in the dowel and
softly hit it with the
rubber hammer, until it’s
fully inside.
Everytime you’re using one of these
connectors during the assembly, you
should follow these same steps.
Don’t forget to gently hit the panels to
adjust the joint.
3
When joining two panels together,
you should put another drop of
glue in the drillings where the
dowels are going.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
2You should insert these cams
with the little arrow pointing
towards the drilling on the
panel’s edge (shown on the
left).
3This is a spreading bolt.
You should put it with the
black plastic part facing down.
4After joining two panels
together you should turn the
cams 180° with a phillips
head screwdriver to adjust
and secure the joint.
1This is a Minifix cam.
It has a little arrow on its
upper surface.
small arrow

6
Let’s start assembling!1
2
You can see the last page of this manual to have
a full look of the panels of this cabinet.
D
B

7
3
4
D
B
C
C

8
5
6
E
E
D
B
C

9
7
Turn this
panel over
A
A

10
8
9
BA
DC
E
G