Tunai Wand User manual

TUNAI WAND
BLUETOOTH TRANSMITTER
www.facebook.com/tunai.global/
www.instagram.com/tunai_creative_eng/
www.tunai-creative.com

IMPORTANT NOTICE
•DO NOT expose the product under direct sunlight for
long hours
•DO NOT disassemble the product, unauthorized
disassembly will result warranty to expire
•USE ONLY power adapters with 5V output
WARRANTY
TUNAI provides one year product warranty, please keep
your purchase proof and package.
The warranty does not cover the following :
1. Consumable parts (example : exterior coating damage)
2. Appearance damage
3. Damage caused by improper use with other products
4. Damage caused by failure to comply with instructions
5. Purchased from unauthorized seller
6. Unauthorized disassembly of the product
7. Damage caused by accident, abuse, improper use, fire,
earthquake or other external causes.
1
-TUNAI WAND User Manual -

LED Color
White AUX
Blue SPDIF
Orange Micro USB
TUNAI WAND OVERVIEW
LED Indicator
USB Port
(Power/Audio)
AUX Port
(Audio)
SPDIF
(Audio)
Button
INPUT PORTS
•USB : Power supply and USB audio input
•AUX : 3.5mm audio input
•SDPIF : Optical audio input
BUTTON
•Short press : Mode change / Wake up
•Long press : Force WAND to enter pairing mode
LED Indicator
LED Status
Rapid Flash Pairing Mode
Slow Flash Available for previous
paired device to
connect
LED On Connected
LED Off LED goes off
automatically after 5
minutes
2
-TUNAI WAND User Manual -

INSTALLATION
1. Connect WAND and USB power adapter with the
included micro USB cable. LED will flash once powered.
2. Connect WAND and the audio source to the input port
using the corresponding cable (micro USB and 3.5mm
to RCA is included).
PAIRING
ENTER PAIRING MODE
1. WAND will enter pairing mode when powered for the
first time.
2. LED will flash rapidly when entering pairing mode.
3. To force re-enter pairing mode, long press button for 5
seconds.
PAIRING WITH BLUETOOTH HEADPHONES
1. Force both WAND and Bluetooth headphone to enter
pairing mode. WAND will enter pairing mode
automatically when powered for the first time.
2. WAND will be connected with Bluetooth headphone
automatically once both enters pairing mode.
3. LED indicator stop flashes once paired
AUDIO CODECS
WAND supports aptX for high-quaility audio, aptX for low
latency and standard SBC. To connect with aptX or aptX
low latency, Bluetooth headphone will need to also
support these audio CODECs. Otherwise, standard SBC
will be used for the connection.
Connection priority : aptX low latency > aptX > SBC.
3
-TUNAI WAND User Manual -