TUNIT Hypercharger User manual

Magsafe Wireless Charger
User Manual
CONETNES
1.0 INTRODUCTION------------------------------------------------------------------------ 1
2.0 FEATURES--------------------------------------------------------------------------------- 1
3.0 SPECIFICATIONS --------------------------------------------------------------------- 1
4.0 PACKAGE CONTENTS---------------------------------------------------------------- 2
5.0 OPERATION-------------------------------------------------------------------------------2
6.0 CONNECTION DIAGRAM------------------------------------------------------------ 3

Wireless Charger
1
Tunit Hypercharger - Folding
Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This product is a high-performance wireless charger. This product is
suitable for mobile phones, and other productions based on wireless
charging 5W /7.5W /15W. Connect the wireless to a power charger,
and then you can charge your device supported wireless charging
(mobile phones, etc) by put it on the charger directly .It is helpful in
long time journey and convenient for business!
2.0 FEATURES
Transmitting terminal input: 5V3A 9V2.2A
Transmitting terminal output: 5W/7.5W/15W
Compliant with CE, FCC, standards
It is light, smart and convenient to use
3.0 SPECIFICATIONS
Input
5V3A 9V2.2A
Wireless charging output
5W 7.5W 15W
Switch Frequency
127.6K
Operating Temperature Range
0~40°C
Storage Temperature Range
-20 ~ 40°C
Operation Humidity
10% ~ 80% RH
Storage Humidity
5% ~ 95% RH
Size
100(L)* 100(W)*17.9mm±0.2
Weight
155g±10g

Wireless Charger
2
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
Main unit×1
User Manual×1
adapter×1
C to C cable×1
5.0 OPERATION
Operation Procedures
1. Connect the wireless charger with the C to C cable to the Powered
adapter.
2. ③or ④of the cable insert the input port of the Wireless
Charger,then ④or ③insert to ②of the Adapter Power
supply,and finally plug the adapter into the AC socket.
Note:The order of insertion can be changed.

Wireless Charger
3
Operation Notes
1. For optimum performance, please use the wireless charger
according to this user manual.
2. Please connect the wireless charger to a power adapter which
output should be 5V3A or 9V2.2A
3. Please unplug the wireless charger after using.
4. Do not use the wireless charger with an electronic product which is
not in conformity with the specifications, so as to avoid any
problem caused by specification mismatching.
5. It’s normal that wireless charger will be a little overheated in the
use process.
6. When the wireless charger stops working under some accidents
occurs, you need to check whether the device is compatible with
this charger.
7. Do not let the wireless charger close to fire, such as stove, candles
and etc.
8. Do not let the wireless charger soak into liquid, such as swimming
pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10.If the wireless charger cannot work properly, please contact the
store or distributor in your area.
11.This device complies with Part 15 of the FCC Rules
12.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received
13. Including interference that may cause undesired operation
14. FCC ID :
6.0 CONNECTION DIAGRAM
The Angle operation

Wireless Charger
4
Mobile phone put the picture
P/N

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not
installed and used in accordance with the instructions,may cause harmful interference to
radio communications.However,there is no guarantee that interference will not occur in a
particular installation.if this equipmemt does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and on,the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement,This equipment
should be installed and operated with a minumum distance of 20 cm between the radiator
and your body.