TurboChef Sota User manual

TM
©2015 TurboChef Technologies, Inc.
Owner’s Manual
   i1      
  TM,    TM, ,  

For further information, call
800.90TURBO
or
+1 214.379.6000
Original Instructions
The information contained in this manual is important for the proper installation, use, maintenance,
and repair of this oven. Follow these procedures and instructions to help ensure satisfactory baking
results and years of trouble-free service.
Errors – descriptive, typographic, or pictorial – are subject to correction. Specifications are subject to
change without notice.
Please carefully read this manual and retain it for future reference.

Important Safety Instructions
General Safety Information i
Reducing Fire Risk i
Grounding Instructions ii
Power Cord Replacement ii
Precautions to Avoid Possible Exposure to Excessive Microwave Energy ii
RF Interference Considerations ii
Protective Earth (Ground) Symbol iii
Equipotential Bonding Symbol iii
Specifications and Installation
Theory of Operation 1
Features 1
Dimensions 1
Certifications 2
Oven Construction 2
Electrical Specifications 2
Installation 2
Unpacking Instructions 2
Installation Warnings - Read Before Lifting Oven 2
Lifting and Placing the Oven 3
Installation Near Open Heat Source 3
Oven Restraint Kit 4
ChefComm Pro® 4
ChefComm LimitedTM 4
Date and Time Prompt 4
Voltage Selection 4
Ventilation 4
Cleaning
Daily Maintenance 5-6
Oven Controls 7
Table of Contents

Cooking 8
Menu Cook Mode 8
Manual Cook Mode 11
Info Mode
Information Screen 13
Serial Number 13
Menu Version 13
Firmware Version 13
Service Number 13
VAC (Voltage) 13
Tutorials
Counters Screen 13
Cook Counter 13
Total Cook Time 13
Magnetron Time 13
Total Time (oven on) 13
Power Cycles 13
Fault Log 13
Options Screen 13
Editing / 13
Cook More / 13
Load Menu / 13
Light Ring / 14
VAC / 14
Demo Mode / 14
Manual Cooking / 14
Diagnostic Mode / 14
F2 Bypass / 14
Settings Screen 14
Temperature / 14
Language 14
WiFi Network 15
Sound Volume 16
Set Date 16
Set Time 16
Auto On / 16
Auto Off / 16
Service Screen 17
Manufacturing (Mfg) Screen 17
Load Menu from USB or Smart Card 17
Save Menu to USB or Smart Card 18
Firmware Update 18

Edit Mode
Edit Set Temperature 19
Access Edit Items Screen 19
Name a Group 19
Delete a Group 20
Move a Group 21
Item Editing Options 22
Edit Settings 23
Name an Item 25
Add a Recipe from the Cookbook 26
Change Group 26
Move an Item 27
Delete an Item 27
Troubleshooting 28
North America Limited Warranty 30
International Limited Warranty 32

i
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When operating this oven, strictly adhere to the following safety precautions to
reduce the risk of burns, electric shock, fire, injury, damage to oven or property near oven, or
possible exposure to excessive microwave energy.
General Safety Information
a Read all instructions before using this appliance.
a Read and follow the specific “Precautions to be Observed to Avoid Possible Exposure to Excessive
Microwave Energy” found on page ii.
a This appliance must be grounded. Connect only to a properly grounded outlet. See “Grounding
Instructions” on page ii.
a Install or locate this appliance only in accordance with the provided installation instructions.
a This appliance should be serviced by qualified service personnel only. Contact the nearest authorized
service facility for examination, repair, or adjustment.
a Keep the cord away from heated surfaces.
a Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without
appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave
oven is not always present.           
           .
a : The contents of feeding bottles and baby food jars must be stirred or shaken and the
temperature checked before consumption, in order to avoid burns (IEC 60335-2-90).
a Use this appliance only for its intended uses as described in this manual.
a Only use utensils that are suitable for use in microwave ovens (IEC 60335-2-90).
X   use corrosive chemicals or vapors in this appliance; it is not designed for industrial/laboratory use.
X :   heat liquids or other foods in sealed containers (e.g., jars, whole eggs, etc.) since
they are liable to explode.
X   allow children to use this appliance.
X   operate this appliance if it has a damaged cord or plug, is not working properly, or has been
damaged or dropped. See “Power Cord Replacement” found on page ii.
X   cover or block any openings on this appliance.
X   store this appliance outdoors.
X   use this product near water (e.g., near a kitchen sink, in a wet basement, near a swimming pool).
X   immerse the cord or plug in water.
X   let the cord hang over the edge of a table or counter.
X   use a water jet for cleaning. See pages 5-6 in this manual for proper cleaning procedures.
X : Due to the nature of the appliance, the floors around it may be slippery.
X This appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Reducing Fire Risk
a Remove wire twist-ties from paper or plastic bags used to facilitate cooking in the oven.
a If materials inside the oven ignite, keep the oven door closed, turn the oven off, and disconnect the
power cord or shut off power at the fuse or circuit breaker panel.
a If smoke is observed, switch off or unplug the oven. Keep the door closed to stifle any flames.
X   use the cook cavity for storage purposes.
X   overcook food. Carefully attend to the oven if paper, plastic, or other combustible materials are
placed inside the oven to facilitate cooking.
X   leave paper products, cooking utensils, or food in the cavity when the oven is not in use.

ii SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This oven is equipped with a cord that has
a grounding wire with a grounding plug, which must be plugged into an outlet that is properly installed and
grounded. Consult a qualified electrician or serviceman if uncertain about the ability to follow grounding
instructions or if in doubt as to whether the appliance is properly grounded.
X   use an extension cord. If the power cord is too short, have a qualified electrician or
serviceman install an outlet near the appliance.
WARNING:Improper grounding can result in risk of electric shock.
POWER CORD REPLACEMENT OR REMOVAL
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly
qualified person.
WARNING: If the oven is unplugged during service or maintenance, the user must be able to access and
see the plug at all times to ensure that the oven remains unplugged. The plug must remain near the oven
and cannot be placed behind another appliance or in another room.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE ENERGY
(a) Do not attempt to operate this oven with the door open since open-door operation can result in
harmful exposure to microwave energy. It is important not to defeat or tamper with the safety
interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to
accumulate on sealing surfaces.
(c) Do not operate the oven if it is damaged. It is particularly important that the oven door close
properly and that there is no damage to the: (1) Door (bent), (2) hinges and latches (broken or
loosened), (3) door seals and sealing surfaces.
(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel.
RF INTERFERENCE CONSIDERATIONS
This oven generates radio frequency signals. This device has been tested and was determined to be in compli-
ance with applicable portions of FCC part 18 requirements and to the protection requirements of Council
Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic
compatibility at the time of manufacture. However, some equipment with sensitivity to signals below these
limits may experience interference.
If your equipment experiences interference:
a Increase the physical separation between this oven and the sensitive equipment.
a If the sensitive device can be grounded, do so following accepted grounding practices.
a If battery-powered microphones are being affected, ensure that the batteries are fully charged.
a Keep sensitive equipment on separate electrical circuits if possible.
a Route intercom wires, microphone wires, speaker cables, etc. away from the oven.
SAVE THESE INSTRUCTIONS

iii
SAFETY INSTRUCTIONS
PROTECTIVE EARTH GROUND SYMBOL
This symbol identifies the terminal which is intended for connecting an external conductor for
protection against electric shock in case of a fault, or the terminal of a protective earth (ground)
electrode.
EQUIPOTENTIAL BONDING SYMBOL
This symbol identifies the terminals which, when connected together, bring the various parts of an
equipment or of a system to the same potential, not necesarily being the earth (ground) potential,
e.g. for local bonding.
SAVE THESE INSTRUCTIONS

iv SAFETY INSTRUCTIONS
This page intentionally blank.

1
SPECIFICATIONS AND INSTALLATION
Theory of Operation
Utilizing TurboChef’s patented technology to
rapidly cook food without compromising quality, the
i1 (models Soˇta, Soˇta Single Magnetron, Panini, and
NGO) ovens provide superior cooking performance
while requiring minimal space and energy consump-
tion. The control system precisely coordinates inde-
pendent top and bottom impinged airflow with top-
launched microwave to deliver product-specific results,
and integral catalytic converters allow for UL®-certified
ventless operation (see page 4 for details).
This manual includes instructions for installing, clean-
ing, and operating i1 ovens. If you have questions that
are not addressed in this manual, contact Customer
Support at 800.90TURBO (+1 214.379.6000) or your
Authorized Distributor.
Features
- Capacitive touch screen with industrial-grade
tempered glass cover
- Manual mode for on-the-fly cooking
- Add from cookbook option that allows a user to
access and save TurboChef cookbook recipes
- Up to 10 selectable languages
- Integrated tutorials for daily operation
and maintenance
- Enhanced data logging for troubleshooting
assistance and learning which products are
being cooked and when
- Menu editing tools and USB/smart
card detection
- WiFi ready for the connected kitchen
Dimensions
Oven Dimensions
Height: 25.0” (635 mm)
Width: 16.0” (406 mm)
Depth (footprint): 18.5” (470 mm)
Depth (door closed): 29.8” (757 mm)
Depth (door open): 39.1” (993 mm)
Oven Weight
Soˇta, Panini, and NGO: 170 lb. (77 kg)
Soˇta Single Magnetron: 135 lb. (61.2 kg)
Cook Cavity Dimensions
Height: 7.2” (183 mm)
Width: 12.5” (318 mm)
Depth: 10.5” (267 mm)
Volume: 0.54 ft3(15.4 liters)
Clearances
Top: 5” (127 mm)
Sides: 2” (51 mm)
16.0”
(406 mm)
21.0”
(533 mm)
4.0”
(102 mm)
11.8”
(300 mm)
25.0”
(635 mm)
27.3”
(693 mm)
Approximate location
of cord and plug
2.5”
(64 mm)
18.5”
(470 mm) 4.2”
(107 mm)
10.7”
(272 mm)
25.9”
(658 mm)
2.5”
(64 mm)
39.1”
(993 mm)
Figure 1: i1 Oven Dimensions
16.0”
(406 mm)
21.0”
(533 mm)
4.0”
(102 mm)
11.8”
(300 mm)
25.0”
(635 mm)
27.3”
(693 mm)
Approximate location
of cord and plug
2.5”
(64 mm)
18.5”
(470 mm) 4.2”
(107 mm)
10.7”
(272 mm)
25.9”
(658 mm)
2.5”
(64 mm)
39.1”
(993 mm)
16.0”
(406 mm)
21.0”
(533 mm)
4.0”
(102 mm)
11.8”
(300 mm)
25.0”
(635 mm)
27.3”
(693 mm)
Approximate location
of cord and plug
2.5”
(64 mm)
18.5”
(470 mm) 4.2”
(107 mm)
10.7”
(272 mm)
25.9”
(658 mm)
2.5”
(64 mm)
39.1”
(993 mm)

2SPECIFICATIONS AND INSTALLATION
Certifications
cULus, UL EPH, TÜV, CE, FDA
Oven Construction
Exterior
- Powder coated, corrosion-resistant steel outer
wrap and door
- Die-cast aluminum front panels with matte-
chrome accents
- Cool-to-touch exterior; all surfaces below 50°C
- Ergonomic matte-chrome door handle
- 4-inch adjustable legs
Interior
- 201/304 stainless steel
- Fully welded and insulated cook chamber
- Removable rack and lower jetplate
Electrical Specifications
TurboChef recommends a Type D circuit breaker
for all installations outside the United States.
Single Phase (Soˇ ta, Panini, and NGO)
US/Canada: 208/240 VAC*, 60 Hz, 30 A, 6.2 kW
Europe/Asia (UK): 230 VAC, 50 Hz, 27 A, 6.2 kW
Brazil (BK): 220 VAC, 60 Hz, 28 A, 6.2 kW
Latin America (LA): 220 VAC, 60 Hz, 28 A, 6.2 kW
Japan (JK): 200 VAC, 50 or 60 Hz, 30 A, 6.2 kW
Multiphase (Soˇ ta, Panini, and NGO)
Europe/Asia Wye (EW): 400 VAC, 50 Hz, 16 A, 6.2 kW
Europe/Asia Delta (ED): 230 VAC, 50 Hz, 20 A, 6.2 kW
Australia Wye (AU): 400 VAC, 50 Hz, 16 A, 6.2 kW
Japan Delta (JD): 200 VAC, 50 or 60 Hz, 20 A, 6.2 kW
Korea/Middle East Wye (KW): 400 VAC, 60 Hz, 16 A, 6.2 kW
Korea/Middle East Delta (SD): 230 VAC, 60 Hz, 20 A, 6.2 kW
Soˇ ta Single Magnetron
US/Canada 1 Ph: 208/240 VAC*, 60 Hz, 20 A, 4.2/4.8 kW
Europe (UK) 1 Ph: 230 VAC, 50 Hz, 13 A, 3 kW
Europe (UK) 1 Ph: 230 VAC, 50 Hz, 16 A, 3.6 kW
* US/Canada models include a voltage sensor
that detects 208 or 240 VAC, but does not com-
pensate for lack-of or over-voltage installations.
Installation
Install or locate this appliance only in accordance
with the instructions below.
Unpacking Instructions
1. Remove the oven from its packaging.
2. Before discarding, check the packaging
thoroughly for accessories and literature.
NOTE: Packaging may also be retained in case the
oven may at some point be shipped somewhere
else or returned to the manufacturer.
3. Check the cook cavity thoroughly for
accessories and literature.
4. Discard any packaging in the cook cavity.
Installation Warnings - Read Before Lifting Oven
WARNING: The Soˇta, Panini, and NGO
ovens weigh approximately 170 lb. (77 kg).
The Soˇta Single Magnetron oven weighs
approximately 135 lb. (61.2 kg). Never lift
with fewer than two people.
WARNING: Never lift the oven from the
front and rear or by the door handle. Doing so
will cause the door to misalign, resulting in a
non-warranty service call.
WARNING: The oven must be properly
placed on a food station at all times.
TurboChef will not recognize a fallen oven as
a warrantable claim and is not liable for any
injuries that may result.

3
SPECIFICATIONS AND INSTALLATION
Installation Warnings - Read Before Lifting Oven
Continued
WARNING: This oven is not intended for
built-in installation (i.e., installing the oven in
any structure that surrounds the oven by five
or more sides). Be sure to provide a minimum
of 2” (51 mm) clearance for all sides and 5”
(127 mm) clearance for the top.
WARNING: This oven is not intended to be
stacked without appropriate hardware.
Contact TurboChef for details.
Lifting and Placing the Oven
1. Prepare a surface at least 26” (660 mm) deep
and capable of supporting the following:
Soˇta, Panini, and NGO - 175 lb. (79 kg)
Soˇta Single Magnetron - 140 lb. (63.5 kg)
NOTE: Do not remove the oven legs, as clearance
is required for the bottom cooling fan.
2. Position one or more persons at the left and
right sides of the oven.
3. Place hands under the oven and lift.
4. Place the oven on the prepared surface,
ensuring no edges are hanging off the sides.
5. Ensure the oven rack is properly installed
(attached to the bottom jetplate).
6. Plug in the oven.
NOTE: The oven is primarily serviced through its
top. DO NOT install shelving directly over the
unit. The operator will be responsible for service
charges incurred as a result of added time required
to access the top of the oven.
Installation Near Open Heat Source
When placing a TurboChef oven near an open
heat source (Figure 2), strictly adhere to the
following:
- If the oven is being placed near a grill or stove,
a divider must exist between the oven and the
open heat source, with a minimum of 6” (152
mm) between the oven and the divider.
- If the oven is being placed near a fryer, a
divider must exist between the oven and fryer,
with a minimum of 12” (305 mm) between
the oven and the divider.
- The height of the divider must be greater than
or equal to the height of the oven (25.0” or
635 mm).
- Verify the oven location has a minimum 5”
(127 mm) clearance on top and a minimum 2”
(51 mm) clearance on each side.
Figure 2: Installation Near Open Heat Source
Grill
Partition
25.0” (635 mm)
Above Counter Top
TurboChef
i1 Oven
6”
(152 mm)
Minimum
12”
(305 mm)
Minimum
Deep Fryer
Counter Top / Table
Partition
25.0” (635 mm)
Above Counter Top

4SPECIFICATIONS AND INSTALLATION
Oven Restraint Kit
Part Number: TC3-0242
WARNING: The Oven Restraint Kit will
not prevent the oven from falling off a
countertop if the oven is pulled off or
allowed to slide off the edge. Installation
instructions are included with the kit.
ChefComm Pro
ChefComm Limited
Part Number: CON-7016
ChefComm LimitedTM is a “read-and-transfer only”
version of ChefComm Pro that helps ensure menu set-
tings are easy to distribute, while preventing them from
being altered at the store level.
Date and Time Prompt
The oven maintains a data log that contains valuable
information about the operation of the oven, including
faults, items cooked, and other events. An accurate
date and time are important for the data log. If the
oven loses the date and time as a result of prolonged
disconnection from power, a prompt will alert the
operator to set the date and time. The prompt will only
occur once. If bypassed, the operator must update the
date and time from the Info Mode Settings screen (see
page 16 for details.)
Voltage Selection
For North America oven models, the oven will detect
208 or 240 incoming voltage.
If incoming voltage for the store is different than the
factory-preset voltage, the operator will be required to
select either 208 or 240. The correct voltage will be
enlarged on the screen, identifying which option to
touch (see Figure 3 below).
Ventilation
The TurboChef i1 (models Soˇta, Soˇta Single
Magnetron, Panini, and NGO) ovens have been
approved by Underwriter’s Laboratory for ventless
operation (UL KNLZ listing) for all food items except
for foods classified as “fatty raw proteins.” Such foods
include bone-in, skin-on chicken, raw ham¬burger
meat, raw bacon, raw sausage, steaks, etc. If cook-
ing these types of foods, consult local HVAC codes
and authorities to ensure compliance with ventilation
requirements.
To ensure continued compliance with all health, build-
ing, and fire codes, you are required to maintain clean
and sanitary conditions around your oven at all times.
NOTE: In no event shall the manufacturer assume any
liability for damages or injuries resulting from instal-
lations which are not in compliance with the instruc-
tions and codes previously listed. Failure to comply
with these instructions could result in the issuance
of a temporary cease and desist order from the local
health department until the environment concerns are
addressed.
Part Number: CON-7006
ChefComm Pro® lets you easily create menu
settings on a computer and upload them to an
oven via smart card. For more information, call
TurboChef Customer Support at 800.90TURBO
or +1 214.379.6000.
Figure 3: Selecting Voltage

5
CLEANING
Step 2 (Fig A)
Step 2 (Fig B)
Step 4
Step 5
Step 6
Step 1: Prepare the Oven
WARNING: The oven operates at approximately 500°F (260°C) and may
cause injury if not allowed to cool properly.
• Turn off the oven by touching the Off icon.
• Slightly open the oven door.
• Cooling takes approximately 30 minutes. DO NOT clean the oven until the
oven displays “ready to clean.”
Step 2: Remove the Wire Rack and Lower Jetplate
WARNING: Be sure the oven interior is cool before removing these items.
• The wire rack and lower jetplate are connected and can be removed together.
• Push the wire rack towards the rear cavity wall (Fig A) and then lift up (Fig B).
• Maneuver the bottom jetplate out from under the tabs on the rear cavity wall.
CAUTION: DO NOT remove the top glass jetplate; breakage will result in
a non-warranty service call.
Step 3: Clean the Wire Rack and Lower Jetplate
• Detach the wire rack from the jetplate and wash, rinse, sanitize, and dry each part.
Step 4: Clean the Air Filter
CAUTION: TurboChef does not recognize blocked air vents as a warrantable
claim. The filter must be cleaned regularly or replaced if damaged. During oven
operation, the filter must remain in place at all times.
• Remove the air filter from the back of the oven.
• Rinse the air filter with hot water.
• Allow the air filter to dry completely.
CAUTION:DO NOT operate the oven without the air filter in place.
Step 5: Wipe the Oven Interior
• Use a food vacuum or damp towel to remove large particles from the oven cavity.
Step 6: Clean the Oven Interior
• Spray TurboChef ® Oven Cleaner onto the top, bottom, and sides of oven interior.
CAUTION:DO NOT spray Oven Cleaner into the holes on the back oven
wall. Doing so can damage critical oven components, resulting in a non-
warranty service call.
Daily Maintenance
Follow the steps below when cleaning your i1 oven.
Use only TurboChef ®-approved cleaning chemicals.
The use of any other cleaning products may damage
critical oven components, resulting in a non-warranty
service call.
Supplies and Equipment
TurboChef ® Oven Cleaner (Product Number:
103180), TurboChef ® Oven Guard (Product
Number: 103181), Kay ClickSan® sanitizer, nylon
scrub pad, cleaning towel, disposable gloves,
protective eyewear, dust mask (optional)
Step 1

6CLEANING
Step 6: Clean the Oven Interior, Continued
• Allow Oven Cleaner to penetrate stains for five minutes.
• Clean the oven interior with a nylon scrub pad.
CAUTION: DO NOT attempt to scrub the upper jetplate (A). If food is stuck
to the oven ceiling, gently remove it without applying pressure to the glass
plate. Breakage will result in a non-warranty service call.
CAUTION: DO NOT remove the top glass jetplate (A); breakage will
result in a non-warranty service call.
Step 7: Clean and Dry the Oven Door
• Clean the oven door with Oven Cleaner and a nylon scrub pad.
• Wipe the oven door with a damp towel, and then a dry towel.
Step 8: Rinse or Wipe the Oven Interior
CAUTION: do not use a hose or water jet for cleaning. Doing so can damage
critical oven components, resulting in a non-warranty service call.
• Wipe down the oven interior with a clean damp towel.
• Dry the oven interior with a clean towel.
Step 9: Apply TurboChef® Oven Guard
• Spray TurboChef® Oven Guard onto a clean towel.
• Wipe the interior walls and the inside of the oven door.
CAUTION:DO NOT spray Oven Guard into the cavity, especially around the
holes on the back oven wall. Doing so can damage critical oven components,
resulting in a non-warranty service call.
Step 10: Reinstall Components
• Reconnect the wire rack to the lower jetplate, and reinstall both items.
• Close the oven door.
• Reinstall the filter, or replace it with a new one if the mesh is deteriorated, has
large openings, or has started to dislodge from the frame.
Step 11: Clean the Oven Exterior
• Wipe the oven exterior with a clean, damp towel.
• Remove the lower panel and remove large food particles.
• Wipe the panel with a clean, damp towel.
CAUTION: DO NOT spray chemicals into any openings, such as the louvers
on the side panels or the rear vent catalyst housing. Doing so can damage
critical oven components, resulting in a non-warranty service call.
• The oven is ready to turn on.
A
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11

7
OVEN CONTROLS
Oven Controls
1. Menu Icon/Temperature Icon
Touch to turn the oven on and cook in menu
cook mode (page 8).
NOTE: If Manual Mode is disabled, a
temperature icon will be shown instead of the
menu icon.
2. Manual Icon
Touch to turn the oven on and cook in
manual cook mode (page 11). The Manual
icon is only present if enabled (page 14).
3. “i” Icon
Touch to access Info Mode (page 13). The “i”
icon is only displayed when the oven is off,
warming up, cooling down, or in edit mode.
4. Off Icon
Touch to turn the oven off (cool down).
5. Edit Icon
The Edit icon will only be displayed when
Edit Mode (page 19) is enabled. Touching this
icon will allow you to edit existing
menu items.
6. Groups/Items (1-8 and 9-16)
The oven contains 16 food groups divided
into 2 groups of 8. Each food group contains
16 items divided into 2 groups of 8.
7. Group Name
When viewing items, the group name indicates
which group is being displayed.
8. Set Temperature Toggle
The set temperature toggle will only be
displayed when operating with two different
set temperatures. Touch the toggle to view
groups from the other set temperature.
9. Menu/Manual Toggle
The Menu/Manual toggle will only be
displayed when manual cooking is enabled
and will allow you to switch between
menu mode (page 8) and manual cook
mode (page 11).
10. More/Previous Groups or Items
This icon will only be displayed when using
one set temperature. To view additional
groups or items, touch “More Groups”
or “More Items.” Or, if on screen two, touch
“Previous Groups” or “Previous Items.”
Figure 4: Oven Controls
NOTE: Display options vary depending on which features are enabled.
5
6
9
4
7
8
10
1 3 2

8COOKING
Step 3: Warming Up
NOTE: When the oven is done warming up, it will
“soak” for an additional eight minutes. “Soaking” ensures
the cavity surfaces absorb enough heat so that cooking
will not be affected.
Step 2: Select Cook Temperature
NOTE: If the temperatures are the same, or if Manual Mode
is disabled, this screen will be bypassed.
Step 1: Touch “Menu” or the Oven Set Temperature Icon to Turn the Oven On
Menu Cook Mode
The oven is preprogrammed with recipe settings at the time of manufacture and is ready to operate out of the
box. New menu settings can be loaded via USB or smart card (page 17) or programmed manually
(page 19). If settings are not present, the oven will cook only in manual mode (page 11).
This oven uses impingement and microwave to cook food faster than traditional cooking methods. Air enters
the cavity from the top and bottom using independent fans. Because of this design and to ensure uniformity
of cooking, the oven must be operated only while the top and bottom jetplates are in place. While the
bottom jetplate is removable for cleaning, it is not removable for cooking. Without the bottom jetplate in
place, the oven will not deliver the proper cooking performance to either the top or bottom of the food item.
Additionally, oven damage may result.
The sequence of the steps below may vary, and some may not apply.

9
COOKING
Step 7: Cooking
NOTE: To immediately terminate a cook cycle, touch “STOP.”
NOTE: If the oven door is opened during a cook cycle,
the cycle will pause until the door is closed. Touch “YES”
to resume.
NOTE: Touch “More Groups” to view additional groups.
Step 5: Select a Group
Step 8: Check/Remove Food from Oven
WARNING: Dish/inside of oven and door are hot!
Step 6: Select an Item
NOTE: Touch “More Items” to view additional items.
Step 4: Place Food in the Oven
WARNING: Inside of oven and oven door are hot!

10 COOKING
Step 9: Cook More / Brown More / Cook & Brown More
NOTE: This option must be enabled in order to cook an item
beyond its original cook time (see page 13 for details).
To cook an item longer than its original cook time, touch one of
the icons on the screen:
- Touch “Cook More” if the inside of the food item requires
cooking.
- Touch “Brown More” if the outside of the food item requires
browning or crisping.
- Touch “Cook & Brown More” if both the inside and outside of
the food item require cooking.
Selecting one of these options will cook the item for 20% of the
last cook time selected. The minimum cook time is the fewer of
15 seconds or the entire original cook cycle. The maximum cook
time is one minute. The oven will cook at the settings listed below:
- Cook More: 10% air, 100% microwave
- Brown More: 100% air, 0% microwave
- Cook & Brown More: 100% air, 100% microwave
Step 10: Cooling Down
When finished cooking for the day, touch “OFF” to turn the oven
off and begin cooling down.