Tutti Bambini Henry ITI-HEN-EGG User manual

Henry
Electronic Recliner Swivel & Glider Chair
with USB
Item Number: ITI-HEN-EGG
Item Number: ITI-HEN-P-GREY
IMPORTANT: PLEASE READ CAREFULLY AND RETAIN
THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Please follow these instructions carefully to assemble your Henry
Recliner Chair.
If you are missing any parts or require some assistance please
contact us via the contact details on this page.
SAFETY PRECAUTIONS
2

Your HENRY
ELECTRONIC RECLIN-
ER CHAIR has been
designed in
Australia by Il Tutto
International Pty Ltd
with safety and comfort
in mind.
Please read all
instructions carefully
before and during
assembly and use of
this chair.
Do not allow children to
play near or on the
chair during assembly
or use.
Dispose of all packag-
ing material immediate-
ly after assembly.
We reccommend 2
people assemble the
chair.
Keep these instructions
for future reference.
Assembly
Instructions
3

OPERATING THE RECLINE POSITION
1. To recline the chair
and release the foot-
rest, push one button
on the side of the
chair.
2. To retract the chair
back into the upright
position, push the 2nd
button on the side of
the chair to replace it
back into the upright
position.
3. USB port is located
on the side of the
chair for you to
charge your device.
4
CAUTION: Do not allow children to play on this electronic chair or operate the
mechanism. The leg rest folds down on closing and could possibly injure a child if
they are near the folding mechanism. Do not leave children unattended on or near
the chair. Always leave the chair in an upright and closed position. Keep hands and
feet clear of mechanism. Only the adult occupant should operate the chair.
!

5
!
CAUTION
RISK OF ELECTRIC SHOCK.
USE IN DRY LOCATION ONLY.
POWER CORD
SAFETY
UNPLUG AND REMOVE
POWER CORD FROM THE
WALL AND THE BACK OF THE
ELECTRONIC CHAIR WHEN
NOT IN USE. STORE THE
CORD OUT OF REACH OF
CHILDREN.
DANGER
TO REDUCE THE RISK OF
ELECTRIC SHOCK;
ALWAYS UNPLUG THE POW-
ERED ELECTRONIC CHAIR
FROM THE ELECTRICAL
OUTLET BEFORE CLEANING.
!

6
WARNING
RISK OF FIRE.
MAKE SURE THE POWER
CORD IS NOT UNDER THE
METAL BASE OF THE ELEC-
TRONIC CHAIR. THIS IS A
FIRE HAZARD.
POWER CORD
SAFETY
UNPLUG AND REMOVE
POWER CORD FROM THE
WALL AND THE BACK OF THE
ELECTRONIC CHAIR WHEN
NOT IN USE. STORE THE
CORD OUT OF REACH OF
CHILDREN.
DANGER
TO REDUCE THE RISK OF
ELECTRIC SHOCK;
ALWAYS UNPLUG THE POW-
ERED ELECTRONIC CHAIR
FROM THE ELECTRICAL
OUTLET BEFORE CLEANING.

CLEANING & MAINTENANCE
Wipe clean with a damp cloth. Use mild soap if required.
Do not use bleach.
Treat spills and stains as soon as possible.
Made in China.
Seat Lining 100% Polyester
Seat Filling Polyester/ Polyurethane Foam
Always check parts regularily and tighten or replace any
screws, nuts or fasteners if required. Always contact us im-
mmediately if you have any concerns or require any spare
parts for your Henry recliner chair. Only use
Il Tutto replacement parts.
If you require assistance with assembly please contact us via
the information on this page.
7

www.iltutto.com.au
[e-mail]
Il Tutto
International
Pty Ltd
PO Box 616
South Melbourne
Vic 3205
Australia
Ph: 1300 780 548
8
The electrical componenet of this chair has been tested to the following standards.
SAFETY STANDARDS
AS/NZS CISPR 14.1:2013
IEC 60335-1:2010 +A1:2013 +A2:2016
AS/NZS 60335.1:2011 + A1:2012 + A2:2014 + A3:2015