Tuttnauer T-Edge 11 User manual

Innovation · Legacy · Partnership
T-Edge
Quick Guide
1 | Settings
2 | Pressure / Temp. Gauge
3 | Water Level
4 | Door Status
5 | Toggle Between Screens
6 | Alerts
Main Screen Orientation
7 | Changing Cycles (Class S)
Unwrapped Instruments 2700F
Wrapped Pouches 2700F
Handpieces
Unwrapped delicate 2500F
7 | Changing Cycles (Class B)
Unwrapped Instruments 2730F
Wrapped Pouches 2730F
Wrapped Delicate 2500F
Unwrapped Delicate 2500F
1Insert the pouches or instruments
you want to sterilize 2Choose the required cycle in the main screen
4Press “Start” to begin the
sterilization cycle
Choosing the sterilization cycle
3Close the door
1
5
6
7
32 4
180.5F
Ster: 2730F/3:00min, Dry: 1:00min Ster: 2730F/4:00min, Dry: 23:00min
Ster: 250
0
F/20:00min, Dry: 35:00minSter: 250
0
F/15:00min, Dry: 1:00min
Unwrapped 273 Unwrapped 273
Unwrapped 250 Unwrapped 250
Unwrapped 273
Ster: Temp: 273.00F
Ster. Time: 3:00min
Dry Time: 1:00min
1320F

5The cycle status will be displayed on
the “Status Bar”. You can stop the
cycle at any point by pressing the
“Stop” button
Ster: Temp: 273.00F
Ster. Time: 3:00min
Dry Time: 1:00min
Unwrapped 273
1320F
6Once the sterilization cycle is
complete - press the “Confirm”
button in order to open the door.
Unwrapped 273
1050F
7If alerts show on the screen -
press the alert (bell) icon. The
alert will be listed on the screen.
1320F
8In order to efficiently clean the autoclave
chamber (once a week or every 25 cycles),
choose “Chamber Clean” cycle and place a
Chamber Clean tablet at the back of the
chamber. Close the door and begin the
cycle. After cycle has ended, you must run
a second cycle of just water.
1490F
Innovation · Legacy · Partnership
Tuttnauer USA Co. Ltd.
25 Power Drive, Hauppauge, NY 11788
Tel: [phone], Fax: [phone]
E-mail: inf[email protected], www.tuttnauerUSA.com
Visit our blog: tuttnauerusa.com/blog
Learn from our experts.
MAN205-0743EN USA