Tuuci equinox User manual

2 LADDER; MINIMUM HEIGHT 14’
ASSEMBLY REQUIRES 3 PEOPLE
Equinox Manual
assembly instructions
TUUCI
DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION
MUST READ INSTRUCTIONS
WT#

1005155 | tuuci
| 3
READ BOX LABELS TO UNPACK
TOOLS NEEDED
(images are not to scale)
Socket 9/16” or 14mm 7/32” Allen key 5/32” allen key 5/16” allen key 3/4" wrench
Rubber mallet Phillips screw driver 3/16” allen key locking vice grips pliers
DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION
DO NOT MIX PARTS OR HARDWARE
TYPICAL SHIPMENT STACKING
BACKREST
MATTRESS
SEATING FRAME
ROOF
ROOF
ROOF
WALL
WALL
BEAMS BEAMS
BEAMS COLUMNS BEAMS BEAMS
BEAMS COLUMNS
UN-STACK AND UNPACK BOXES THAT SAY COLUMNS AND BEAMS
ASSEMBLY INSTRUCTIONS IN THIS BOX

1005155 | tuuci
| 4
1
DO NOT TIGHTEN HARDWARE. TIGHTEN AT THE END OF INSTALLATION
STEPS TO ASSEMBLE CABANA
2
3
4
5
INSTALL BASE
ASSEMBLE COLUMNS & BEAMS
IF APPLICABLE CONNECT ALL ELECTRICAL
IF APPLICABLE
ASSEMBLE SEATING
ASSEMBLE ROOF
ASSEMBLE SIDE WALL
TIGHTEN ALL SCREWS
TIGHTEN AT THE END OF INSTALLATION
6