TV Star T1030 HD USb PVR User manual

HIGH DEFINITION DIGITAL
RECEIVER
FULL HD 1080p
TV STAR T1030 HD USB PVR
USER MANUAL
ENG

Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
8) Operate this product only from the type of power source indicated on the label. If you are not sure of
the type of power connected to your home, consult your local power company. Disconnect the unit from
the mains before any maintenance or installation procedure.
9) Protect the mains cord from damage and stress.
10) Only use attachments/accessories specified by the manufacturer.
11) Unplug this apparatus during lightning storms or when unused for long periods of time.
12) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, including damage to the mains cord or plug, if the unit has been exposed to liquid
or moisture, has been dropped or is not operating correctly.
13) Do not impede the air flow into the unit by blocking the ventilation slots.
14) Attention should be drawn to the environmental aspects of battery disposal.
15) Use the apparatus in moderate climate.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
WARNING: The batteries shall not be exposed to excessive heat such as direct sun light, fire, etc.
.
This symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit
This symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
This symbol indicates that this product incorporates double insulation between
hazardous mains voltage and user accessible parts. When servicing use only
identical replacement parts.
This symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of life separately from
your household waste. There are separate collection systems for recycling.
For more information, please contact the local authority or your retailer where
you purchased the product.

Accessories
Package Contents
Before installation, please check the contents of the package.
The package should contain the following items:
1.DVBT TV Receiver 1 pc.
2.Remote Control 1 pc.
3.AAA Battery for the
Remote Control
1 pair.
4. User Manual 1 pc.
Front and Rear Panel
1. Front panel
    
Remote Control
User Manual
DVBT TV Receiver
AAA Battery
1 CH-: Change channels or items from top to bottom on the menus
2
POWER BUTTON:
Pust to turn on/off the main power supply
3
CH+:
Change channels or items from top to bottom on the menus
4
REMOTE CONTROL SENSOR
: used to channels without using the Remote Control
5
USB
: For software upgrade and media playback

2. Rear panel
    
1. RF IN: Use to connect an antenna.
2. RF OUT LOOP THROUGH: Use it when connecting to another STB
3. COAXIAL: This socket connects to a digital audio coaxial socket on your home theatre
4. HDMI: High definition multimedia interface
5. TV SCART: Use this connector to connect your receiver to your TV set using a SCART cable
Remote Controle
POWER: Switch the receiver in and out of standby model.
MUTE: Disable Audio output
<0>-<9>: Numeric keys.
CH-/CH+: Program changing keys.
MENU: Display main menu on TV screen, and press again
to exit current menu.
OK: To confirm current setting, or display all programs in no-menu mode.
VOL-/VOL+: Turns up/down volume.
 : Press to move the cursor.
EPG: Shows the Electronic Program Guide.
FAV: Display your favorite channels list. Press FAV again to access to
the other favorite lists.
V-FORMAT: Switch the HDMI 720P and 1080P.
RECALL: Go back to the previous viewed channel.
Red/green/yellow/blue: Use to navigate between pages in teletext mode and
special functions in menu or EPG
REC: Record in USB drive
ASPECT: Switch 4:3/16:9.
TTX: Switch on Teletext, if current channel has this option ,
and use EXIT key to quit Teletext
SUBTITLE: Display subtitle options (availability depends
on the channel)
AUDIO: Change the Audio language and Left/Right channel
(availability depends on the channel)
TIMESHIFT: Use after RECORD button for timeshift
EXIT: Use this key to quit current menu.
INFO: Display information about the current channel.
TV/RADIO: Switch between Digital Radio and DVB-T modes.
PAGE+/PAGE-: To navigate inside the menus.
TIMER: Use to access ON/OFF timer directly
PVR and Multimedia keys:

3.Installation the Batteries
Remove the battery cover from the rear of the Remote Control and place 2xAAA size batteries
inside the compartment.
Please make sure the battery polarities match the polarity markings inside the compartment.
1 .Open the cover 2.Install batteries 3.Close the cover
Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top Box.
The Remote Control has a range of up to 7 metres from the Set Top Box at an angle of
up to 60 degrees. The Remote Control will not operate if its IR sensor is blocked.
Sunlight or very bright light decrease the sensivity of the Remote Control
Connecting to a Television
For a basic connection from your Set Top Box to the television, use SCART connection
For the highest quality connection use a direct HDMI connection, see below.
.