
Operating manual FDB30
5
1. Safety | Intended use
To avoid risks please observe the following safety instructions when using accessories.
The FDB30 dolly was developed for professional use in sound systems. The dolly may only
be used by trained and qualified personnel.
Note the operating modes described in this operating manual. Other uses are not permis-
sible.
Damage caused by improper use is not covered by TW AUDiO.
Before each use, check the integrity of the FDB30 dolly and ensure that all components are in
perfect condition.
The FDB30 dolly may only be used with the B30, VERA S30 or T24N loudspeaker.
These operating manual describe how to use the FDB30 dolly. Any other use shall be deemed
improper and may result in damage or even injury.
Modifications or alterations to individual parts of the FDB30 dolly are not permitted! Danger to
life!
The FDB30 is an accessory designed both for indoor and outdoor use.
The FDB30 dolly may only be used by trained and qualified personnel. Personnel must check
the FDB30 for its full suitability before each use.
When visible damage to any part of the FDB30 dolly is detected, it must be decommissioned
immediately.
When moving the FDB30 dolly, ensure full load-bearing capacity and stability of the substrate.
The FDB30 dolly is specified for a load of not more than one B30 or one VERAS30 or one
T24N loudspeaker. This load capacity must never be exceeded!
During movement (assembly or dismantling, transport to the place of use) of the FDB30 dolly
with the B30, VERAS30 or T24N loudspeaker, ensure sufficient space to prevent collisions
with other objects.