Twelve South PowerPic mod User manual

20W USB-C Power Adapter
Required (Not Included)
Adding a photo or artwork
2. Plug the 5ft USB-C Power Cable into the PowerPic Charger and then into
any 20W USB-C charger (USB-C charger not included).
PowerPic mod can charge most mobile phones in three optional positions: 1) frame
portrait/phone portrait 2) frame portrait/phone landscape 3) frame landscape/phone
landscape. You can even charge AirPods Pro by setting it upright on PowerPic mod.
PowerPic status light
AirPods Pro
device
charging
device fully
charged
foreign object
detected
insufficient power
to PowerPic
12 3
A status light can be
found on both sides
of PowerPic mod.
What’s in the Box
PowerPic Charger
PowerPic Base
5ft USB-C Power Cable
A
A
B
C
C
B
Getting started with PowerPic mod
Setting up your PowerPic mod
Charging options & positions
1. Gently insert the PowerPic Charger into the
PowerPic Base as shown. The PowerPic Charger
can be placed in portrait or landscape positions
1. Gently pull the PowerPic Charger front plate from its magnetic fasteners.
2. Place your 4x6 image or pattern onto the PowerPic Charger and then return
the front plate to its magnetic fasteners.
PowerPic mod looks great by itself - but if you would like to add a graphic
or pic first, see “Adding a photo or artwork” first, then return to the setup

PowerPic mod
owner’s guide
Have questions? Visit twelvesouth.com or contact [email protected]
©2021 Twelve South, LLC. All rights reserved.
thank you
FCC ID：2AREB-12-2019
IC ID：24385-12-2019
The foreign object detection light alerts you to objects between your device and PowerPic
that could affect charging. This helps to prevent the charger from emitting unnecessary
power and heat that could damage your smartphone and other heat-sensitive items.
To prevent overheating and damage to your PowerPic or device:
• Do not place any foreign objects, such as metal or magnets, between the phone and
PowerPic. This may interfere with charging, causing overheating or damage to the device.
• Do not place any magnetic stripes or IC chip card on the PowerPic. This may cause damage.
• Do not cover the charging base with any material or cloth. This may interfere with
charging performance.
• Do not let dust accumulate on the charging stand and keep the surface clean.
FCC ID Statement
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
IC Statement
Disclaimer:
Operation is subject to the following two conditions:
This device may not cause interference, and
This device must accept any interference, including interference
that may cause undesired operation of the device.
PowerPic Charging Plate Tech Specs
Input connector: USB Type C
Note: Included cable is 1.5m USB Type C to USB Type C
Input: 5V/2A 9V/1.67A
Output: 5W/7.5W/10W
Operation Frequency: 110~205 KHZ
Modulation type: CVS
Antenna Type: Coil Antenna
Charging efficiency: ≥72%
Additional notes & specs