Twin-Star International 48TI3560 User manual

1
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service:
www.twinstarhome.com
in English Call: 866-661-1218
ATTENTION
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU
APPELEZ LE SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle:
www.twinstarhome.com
pour le service en français: 866-661-1219
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS, ENVÍE UN
MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER ESTE
PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente:
www.twinstarhome.com
Línea para llamadas en español: 866-661-1219
STOP
ARRÊT
PARE
STOP
ARRÊT
PARE

1
MEDIA CONSOLE WITH SOUND BAR
48TI3560
ASSEMBLY INSTRUCTION
Españo p. 11
Français p. 21
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
Printed in China
www.twinstarhome.com
English Call: 866-661-1218
Spanish /French Call: 866-661-1219
For Customer Service:
MAXIMUM LOAD 50 lb. (22.6kg)
MAXIMUM LOAD 80 lb. (36 kg)

2
PACKAGE CONTENTS
Part Description Quantity
A Cabinet 1
B Left Upper Side Panel 1
C Right Upper Side Panel 1
D Support Panel 1
EMedia Top 1
F Leveling Foot 1
J Remote Control 1
KRAC Audio Cables 1
L RAC Video Cables 1
M Power Cables 1
NDC Transformer 1
B
A
F
E
C
D
J
K
M
N
L

3
HARDWARE CONTENTS
Part Description
Bolt
Washer
Wood Dowel
Spring Washer
Allen Key
8+1 extra
8+1 extra
12+1 extra
8
1
Quantity
Picture
(Shown to size)
BB
CC
DD
EE
AA
SAFETY INFORMATION
WARNING
•Beforeassembly,carefullyusescissorsorutilityknifetocutandunwrapallparts. 
 Makesureyoudonotdiscardthehardware.
CAUTION
•Usecareinassemblingyournewunit.Takeyourtimeandusethehardware
provided and a quality Phillips head screwdriver. Never overtighten bolts.
•Donotsitonanypartoftheunit.
•Allpanelsarelabeledleftandrightasviewedfromthefrontofunit.
Touch-up Pen 1
ZZ

4
ASSEMBLY INSTRUCTIONS
PREPARATION
Beforebeginningassemblyofproduct,makesureallpartsarepresent.Comparepartswith
packagecontentslistanddiagramabove.Ifanypartismissingordamaged,donotattemptto
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
ToolsRequiredforAssembly(notincluded):Phillipsheadscrewdriver,scissorsandutilityknife
1. There are levelers located on the bottom of the
Wood Feet, the height can be increased by twisting
 counter-clockwise.
Open the drawer, unscrew the bolts located on
the front of the drawer, re-install the Pulls on the
front face of the drawer.
Attach leveling foot (F) to the bottom of the hearth/
 base(A)bytwistingitclockwise.
2. Insert one Wood Dowel (CC) into each of the
pre-drilled holes .
Push Support Panel (D) snug to the top of the
Cabinet (A).
Locate upper side panels (B, C) on the top of the
Cabinet (A), as shown in diagram.
 Makesurethatdowelsareseatedintothepre-drilled
holes.
Attach these panels using Allen Key (DD) to tighten
Bolts (AA), Spring Washer (EE) and washers (BB)
through holes in the upper side panels (B, C).
HAND TIGHTEN ONLY. B
A
F
Fig. 2
Fig. 1
CC
CC
C
D
AA
DD
EE
BB
Hardware Used
BB
EE
AA
CC
Bolt x 4
Washer
Spring Washer
x 4
x 4
Wood Dowel x 6
x 1
DD Allen Key
Unscrew
Install

5
Fig. 3
Fig. 4
Fig. 5
4. To remove the drawer, fully extend the drawer out
 andlocatetheblackplasticleverslocatedonthe
 metalglidetracksofthedrawerbox.Atthesame 
time, push down on the plastic lever while gently
pulling the drawer out from the cabinet to disengage
the drawer box from the glide. Set the drawer aside.
Hardware Used
BB
AA
CC
Bolt x 4
Washer x 4
Wood Dowel x 6 AA
E
DD
EE
BB
CC
CC
3. Insert Wood dowel (CC) into each of the pre-drilled
holes on the top edges of the assembly from step 2.
 ThenlocateMediaTop(E)andlaynishedsideup
on top of completed assembly.
From the inside, attach Media Top (E) using Allen
Key (DD) to tighten Bolts (AA) ,Spring Washer (EE)
and washers (BB) through the pre-drilled holes in the
 mountingblocks.
DD Allen Key
EE Spring Washer x 4

6
PRODUCT SPECIFICATIONS
WIRING
Adapter Input AC100-240V, 50/60Hz
Adapter Output DC15V 4.0A
Power Consumption 60 Watts
Standby Power Consumption < 1 W
PeakMusicPowerOutput 300 W
OPTICAL VIDEO R L
DC 15V
OUTPUT AUDIO
INPUT
INPUT +
-
Fig.1 Back Panel
1. RCA:
Your console includes RCA cables to stream audio from an external source (i.e.TV) to the sound
system.ThereisalsoavideocablewhichwillstreamvideofromadockediPhone/iPodtoyour
television.
2. Optical Cable:
You also have the additional option to stream audio using a standard Optical Cable (not included).
3.Insertthecorrespondingcablesfromyourtelevisionorothersourcedeviceintothebackofthe
sound system console.
1). RCA audio cables (part K – audio input R/L)
2). RCA video cable (part L – video input)
3). Optical cable (sold separately – optical input)
4. Plug the power cable (part M) into a standard 100-240V outlet and into the DC transformer (part N).
Plug the DC power source into the DC 15V port.
Ipod Dock: TS-ID01
J
M
N
Fig.1 Back Panel
Ipod Dock: TS-ID01
K
L

7
POWER
The POWER button supplies power to all of the functions of the sound system. The POWER button will put the
sound system in a standby mode.
CHARGING
1. Insert the iPod or iPhone to the dock connector.
2. The docked iPod of iPhone will charge. The charging current is DC one ampere.
3. Note: Certain irregular shaped or large phone covers may need to be removed for use with
the docking station.
CLOCK
1. Automatic Time Set:
The console will read and sync the clock to the time of your docked iPhone or iPod.
Note: Automatic time sync will not work with some older model iPods.
2. Manual Time Set:
Hold "clock" for 3 seconds until the hour digits ashes.
Press the "+ / -" buttons to set the hour.
Press "clock" again. The minute digits will ash.
Press the "+ / -" buttons to set the minutes.
Press "clock" to conrm.
Note:The clock will fade out after 30 seconds. Press"clock" again to view the time.
3. The clock display will fade after 10 seconds. Press "CLOCK" to continously display the time.
INPUT SETTING
Press the "INPUT" button to scroll through the dierent input options:
OPERATION
Will stream sound and/or video from your docked iPod or iPhone device.
Will search for other smartphones and devices. The blue ashing light
indicates the unit is searching for devices with a WPAN (Bluetooth) function
activated.Selecting "sound system" from your device will link it to the console
and allow to stream sound from up to 10 meters away. The light will stay
continuously lit once a connection has been made to the device.
Will stream sound from your television or other device connected to the console by
RCA cables.
Will stream sound from your television or other device connected to the console by
Optical Cable.

8
CONTROLS
Fig.2 Remote Control
Fig.3 Control Panel
- Power / Standby
- Mute
- Access the menu of the docked iPhone/ iPod
- Scroll through source input options
- Display time
- Scroll the docked iPhone/ iPod menu
- Conrm selection from the docked iPhone/ iPod menu
- Scroll the docked iPhone/ iPod menu
- Back(Previous)
- Play/Pause
- Forward(Next)
- Adjust Treble
- Adjust Bass
- Adjust Volume
- Main Power / Scroll through source input options
- Display / Set Time
- Adjust Volume
- Back(Previous)
- Play/Pause
- Forward(Next)
CLOCK
INPUT
TROUBLESHOOTING
PROBLEM SOLUTION
1. iPhone/iPod does not respond to
thespeakersystem. 1a.Checkforanyobstructionsbetweentheconnectorandthe iPhone/iPod.
1b. If your iPod/iPhone is using a case accessory,try removing the
caseandre-dockingtheiPhone/iPod.
2. Sound is distorted. 2a. Decrease the volume.
2b. If the iPhone/iPod original sound source is of poor quality,
distortionandnoiseareeasilynoticedwithhigh-powerspeakers.
Try a different audio source such as a music CD.
2c.Ifyouareusinganexternalsoundsourcelikeoldergeneration
of iPod, try reducing the output volume on the device itself.
2d.Try changing the bass and treble settings using the remote control.
3. Unit gets warm after extended
play at high volume. 3a. Turn the unit off for a period of time or lower the volume.

9
When the remote control stops operating or its range seems reduced, it is time to replace the battery
with a new one.
1.Thebatterycompartmentislocatedonthebackendoftheremote.
2. Press and slide the battery door open and remove the old battery.
3.Insert1pcCR2025battery,checkingthatthe+and-sidesofthebatterymatchinsidethe
battery compartment.
4. Replace the battery compartment door.
CAUTION:
•Alwayspurchasethecorrectsizeandgradeofbatterymostsuitablefortheintendeduse.
•Replaceallbatteriesofasetatthesametime.
•Cleanthebatterycontactsandalsothoseofthedevicepriortobatteryinstallation.
•Ensurethebatteriesareinstalledcorrectlywithregardtopolarity(+and-).
•Removebatteriesfromequipmentwhichisnottobeusedforanextendedperiodoftime.
•Removeusedbatteriespromptly.
Note: Caution do not ingest batteries. If batteries are swallowed immediately call poison control.
Replacing the Remote Control Battery
Disposal of Used Batteries
Battery may contain hazardous substances which could be endangering to enviroment
and human health.
Thissymbolmarkedonthebatteryand/orpackagingindicatesthatusedbatteryshallnot
be treated as municipal waste. Instead it shall be left at the appropriate collection point for
recycling.
By ensuring the used batteries are disposed of correctly, you will help preventing potential
negative consequences for the environment and human health. The recycling of materials
will help to converse natural resources.
For more information about collection and recycling of used batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased
this point.
CARE AND MAINTENANCE
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception. Interference can be determined by turning the equipment off
and on. The user is encouraged to try to correct the interference by trying one or more of the following
measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandthereceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation. Modifcations not approved by the party responsible for compliance could void
user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Warning:
1. If the supply cord is damaged it must be replaced by the manufacturer, it’s service agent or
similarlyqualiedpersonsinordertoavoidahazard.
2.Onlyaqualiedservicepersonshouldrepairthisproduct.
3. Do not use outdoors.
4.Donotinsertorallowforeignobjectstoenterthesystemasthismaycauseanelectricshock,re,or
damage to the appliance.
5. Use this appliance only as described in the manual. Any other use not recommended by the
 manufacturermaycausere,electricshockorinjurytopersons.