twotrees DOUBLE HAMMOCK KIT User manual

200KG CAPACITY
HAMMOCK FABRIC SIZE: 160(W) x 210(L)cm
HAMMOCK STAND MAX SIZE: 330(L) x 100(W) x 100(H)cm
DOUB LE
DOUB LE
HAMMOCK KIT
HAMMOCK KIT
TT402DK
PRODUCT MANUAL
PRODUCT MANUAL
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing
always check with a qualied builder for safety. Two Trees will only guarantee the
performance of this product when used with other Two Trees products. i.e. if non
Two Trees hammocks or frames are used, the guarantee is void.

2
Thank you for purchasing a Two Trees hammock.
We at Two Trees know the importance of spending time relaxing. Hence we’ve developed a range of quality
hammocks and convenient accessories that come with easy to follow instructions so that you will be relaxing
in no time. It is important to read all instructions before use and take care when using your hammock. Please
ensure that you adhere to the following safety measures to get the maximum enjoyment from your new
hammock.
WARNING
Read instructions before use and keep for future reference. Failure to read these instructions before use
can lead to an increased risk of injury. When installing always check with a quali ed builder for safety.
1. Assembly must be carried out by an Adult.
2. Ensure hammock is fully assembled before use.
3. DO NOT exceed the maximum load of 200kgs.
4. DO NOT climb into hammock feet  rst.
5. DO NOT stand in hammock.
6. DO NOT dive into or jump about in hammock.
7. DO NOT stick your head through the suspension
cords.
8. Keep suspension cords as straight as possible,
DO NOT twist.
9. Inspect frame feet and ensure they are stable
before use.
10. DO NOT use damaged or weakened hammock
hanging accessories.
11. Hammock fabrics and accessories will wear over
time and use. Always check the loading capacity
and condition of parts before use.
12. Hammocks are not designed for swinging,
playing, climbing or to be used as a children’s
toy.
13. DO NOT leave children or pets unattended in or
near hammock.
14. Hammock fabric, suspension cords and hanging
accessories will become worn over time and
use. Always inspect prior to use and DO NOT
use if items show signs of damage or weakness.
CAUTION AND SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
15. Always check the loading capacity before use.
16. Keep hammock clear of obstructions.
17. Allow a minimum of 50cm clearance range
around the perimeter of your hammock when
in use (Fig. 1).
18. Only use the hammock on level fl oors with
shock-absorbing properties such as carpet or
outdoor grass to minimise the risk of injury in
case of an accident. DO NOT use on slippery
or hard surfaces.
19. Never use a free standing brick wall to hang your
hammock.
20. Only use Two Trees accessories for hanging your
hammock.
21. DO NOT modify hammock. Hammock must be
used in accordance of this manual.
22. DO NOT smoke in or around the hammock.
Keep away from heat or fl ames.
23. DO NOT use whilst wearing shoes, clothing,
jewellery or accessories that have a hook and
loop fastener.
24. DO NOT use near sharp objects.
25. A copy of this manual must be provided should
the hammock transfer ownership.
SELECTING THE LOCATION

3
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
There are many ways to hang your hammock, here are some
of our favourite and recommended options:
BETWEEN
TWO POSTS
BETWEEN
TREES
BETWEEN
TWO WALLS
ON HAMMOCK
FRAME
SELECTING THE LOCATION

50cm
50cm
50cm50cm
Hammock
Maximum
Length
> 200Kgs
4
DO NOT twist or knot suspension cords when
hanging.
DO NOT leave children or pets unattended in
or near hammock.
DO NOT exceed the maximum load of 200kgs.
Hammocks will stretch by 5-10% after the  rst few
uses. Adjustments can be made after each use to
keep you and your hammock comfortable.
Allow a minimum of 50cm clearance range
around the perimeter of your hammock when
in use. <Fig.1>
You need a minimum of 3.2 metres space to fully
assemble this hammock kit. At  rst, the included
hammock will require 3 metres to get the ideal
shape. However, through use of your hammock
will naturally stretch and sag. This is why we’ve
added a 20cm extension to your hammock stand,
so you can adjust your hammock and continue
relaxing.
TEMPORARY INSTALLATIONS
PERMANENT INSTALLATIONS
THINGS TO CONSIDER
THINGS TO CONSIDER
WARNING:
Read instructions before use and keep for future reference. Failure to read these instructions before use
can lead to an increased risk of injury. When installing always check with a quali ed builder for safety.

3.0m
1.8m
20 - 30cm
5
Should you not want to use your included frame and would like to
hang from a tree, beam or posts please follow the below guide.
To hang your Two Trees hammock you will require two  xed
points, such as trees, beams, posts, or dyna bolts into brick walls.
Consult a quali ed builder if unsure.
WARNING: Never use a free standing brick wall
to hang your hammock.
Your Two Trees hammock will require a minimum of 3 metres
between  xing points to get the ideal shape. Rope may be needed
to attach one end of the hammock, it is recommended to use a
double piece to avoid the hammock twisting.
Hang the hammock loops at roughly the same height. When the
hammock is in use it should sit 20-30cm above the ground.
TEMPORARY INSTALLATIONS
PERMANENT INSTALLATIONS
For temporary installations, such as trees or beams, we recommend using the Two Trees hammock
hanging kit (TT501HK). For more information about our installation products please visit our website
(www.twotreeshammocks.com.au)
We recommend using the Two Trees screw
eye and hook (TT502HH). Always check with
your quali ed builder if unsure of safety.
For sturdy masonry walls (not air/hollow/single
brick or besser block) a 10mm dyna bolt with
a large washer and rope can be used.
Place the cord around the
pole or tree, then thread
through the  gure eight
hook.
Thread the cord through
the clamp hook and
secure at desired length.
Repeat process for other
side of hammock. Ensure
both hooks are secure, place
hammock ends over hooks.
Read instructions before use and keep for future reference. Failure to read these instructions before use can
lead to an increased risk of injury. When installing always check with a quali ed builder for safety.
WARNING:
DO NOT EXCEED THE MAXIMUM LOAD OF 200KGS
HOW TO HANG YOUR HAMMOCK
HOW TO HANG YOUR HAMMOCK
1 2 3

6
ENJOYING YOUR HAMMOCK
ENJOYING YOUR HAMMOCK
LIST OF PARTS
HOW TO RELAX IN YOUR HAMMOCK
CARING FOR YOUR HAMMOCK
STORING YOUR HAMMOCK
Open the hammock fabric in the centre of the
hammock and slowly and safely sit in the middle
as you would in a chair.
Bring your feet in and stretch them out, so you are
lying on a diagonal. This is the traditional way to
relax in a classic style hammock.
Gently lie back on a diagonal with your head on
the edge of the hammock.
To prolong the the life of your hammock and frame it is best to store away when not in use, as the sun and
rain will deteriorate the construction over time. If using near the sea it is important to rinse your hammock
regularly.
Prior to washing your hammock, tie a loose single knot in the suspension cords at both hanger ends.
Machine wash with cold water on a regular cycle using non-bleach detergent. DO NOT tumble dry.
DO NOT iron. Dry in shade.
When storing your Two Trees hammock make sure hammock is clean
and completely dry.
To prevent tangles place a knot in each suspension cord. Fold the
hammock in half, with suspension cords together. Then fold the edges
of the hammock to the centre, and roll the hammock up starting with
the suspension cords. Store in a dry place.
1 2
3

DE
A
B
C
GF
H
7
DOUBLE HAMMOCK KIT
DOUBLE HAMMOCK KIT
FRAME PARTS
FRAME PARTS
LIST OF PARTS
A Metal arm pipe with  xed screws, 42mm DIA x 1060mm 2
BEnd angle tube 2
CCenter base spreader tube, 36mm DIA x 540mm 1
DMetal stand pipe, 40mm DIA x 985mm 2
EPlastic stand feet 4
FPlastic inside collar 4
GPlastic external collar 2
HTri-wing hand screws 10
IDouble polycotton hammock 1
HAMMOCK STAND MIN SIZE: 310(L) x 100(W) x 100(H)cm
Suitable for hammocks with a minimum of 280cm from end to end
HAMMOCK STAND MAX SIZE: 330(L) x 100(W) x 100(H)cm
Suitable for hammocks with a maximum of 300cm from end to end

B
D
F
H
Small Brace Tube
H
B
A
D
E
C
B
B
C
H
G
I
8
HAMMOCK FRAME
HAMMOCK FRAME
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Made in China exclusively for Mayo Hardware Pty Ltd
4 Secombe Place, Moorebank NSW 2170 Australia
Customer Service Phone: [phone]
www.mayohardware.com.au | 2020©
For more information visit
www.twotreeshammocks.com.au
We will honour all statutory guarantees that this product is
of acceptable quality. (including that it is  t for purpose)
a. Place F(plastic inside collars) in either side of
the small brace tube of B(end angle tube).
b. Insert D(metal stand pipe) into either side of
the small brace tube of B(end angle tube).
c. Secure with H(tri wing hand screws).
d. Repeat on either side.
a. Attach A(metal arm pipe) on top angle end of
B(end angle tube).
b. Fix into place with one of H(tri wing hand screws).
c. Repeat on other side.
a. Attach I(double polycotton hammock) into the
hooks at either end.
b. Ensure that the hammock and suspension
cords are not twisted.
a. Insert G(plastic external collars) on straight end
of either side of B(end angle tube).
b. Take C(centre base spreader tube) and join
both B(end angle tubes) together.
c. Fix into place with four of H(tri wing hand screws).
a. Take E(plastic stand feet) and attach to end
of D(metal stand pipe).
b. Repeat on all sides.
1
3
5
2
4
a. Ensure all tri wing hand screws are secured
and tightened before use.
b. Ensure the hammock is set to the minimum
size setting for initial use.
c. To adjust the length of your stand for your
hammock, extend or shorten the  xtures on C.
(centre base spreader tube).
6
Note: Your hammock will hang taut on the initial
set up. With use, your hammock will stretch and
hang in a more relaxed position.