twotrees TT601CK User manual

120KG CAPACITY
HAMMOCK FABRIC SIZE: 100(W) x 130(L)cm
HAMMOCK STAND SIZE: 100(DIA) x 205(H)cm
SINGLE
HAMMOCK CHAIR KIT
TT601CK
PRODUCT MANUAL
WARNING
Read instructions before use and keep for future reference. Failure to read
these instructions before use can lead to an increased risk of injury. When
installing always check with a qualied builder for safety. Two Trees will
only guarantee the performance of this product when used with other Two
Trees products. i.e. if non Two Trees hammocks or stand are used, the
guarantee is void.

2
Thank you for purchasing a Two Trees hammock.
We at Two Trees know the importance of spending time relaxing. Hence we’ve developed
a range of quality hammocks and convenient accessories that come with easy to follow
instructions so that you will be relaxing in no time. It is important to read all instructions before
use and take care when using your hammock. Please ensure that you adhere to the following
safety measures to get the maximum enjoyment from your new hammock.
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing always
check with a qualied builder for safety.
1. Assembly must be carried out by an Adult.
2. Ensure hammock is fully assembled
before use.
3. DO NOT exceed the maximum load of
120kgs.
4. DO NOT climb into hammock feet rst.
5. DO NOT stand in hammock.
6. DO NOT dive into or jump about in
hammock.
7. DO NOT stick your head through the
suspension cords.
8. Keep suspension cords as straight as
possible, DO NOT twist.
9. Inspect frame base and ensure it is stable
before use.
10. DO NOT use damaged or weakened
hammock hanging accessories.
11. Hammock fabrics and accessories will
wear over time and use. Always check the
loading capacity and condition of parts
before use.
12. Hammocks are not designed for swinging,
playing, climbing or to be used as a
children’s toy.
13. DO NOT leave children or pets unattended
in or near hammock.
CAUTION AND SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
14. Hammock fabric, suspension cords and
hanging accessories will become worn
over time and use. Always inspect prior to
use and DO NOT use if items show signs
of damage or weakness.
15. Always check the loading capacity before
use.
16. Keep hammock clear of obstructions.
17. Allow a minimum of 50cm clearance range
around the perimeter of your hammock
when in use (Fig. 1).
18. Only use hammock on level oors with
shock-absorbing properties such as
carpet or outdoor grass to minimise risk o
injury in case of an accident. DO NOT use
on Slippery or uneven surfaces.
19. Only use Two Trees accessories for
hanging your hammock.
20. DO NOT modify hammock. Hammock
must be used in accordance of this
manual.
21. DO NOT smoke in or around the
hammock. Keep away from heat or
ames.
22. DO NOT use whilst wearing shoes,
clothing, jewellery or accessories that have
a hook and loop fastener.
23. DO NOT use near sharp objects.
24. A copy of this manual must be provided
should the hammock transfer ownership.

3
SAFETY INSTRUCTIONS
There are many ways to hang your hammock, here are some of our favourite and
recommended options:
SELECTING THE LOCATION
Only use Two Trees stand or Two Trees installation kits specically designed for the product. If
using an installation kit to hang your hammock chair from a tree or a load bearing beam please
check with a qualied builder prior to installation. The hammock needs to be checked for wear
and tear regularly and replaced if necessary. Exposure to the elements, sunlight, wet weather,
cleaning etc will deteriorate your hammock overtime reducing its life expectancy.
The instructions outlined and shown in the pictures must be observed and passed onto all
hammock users. Not following the instructions provided poses a safety risk for which no liability
will be assumed. Keep this manual for future reference and pass onto all hammock owners.
For detailed installation instructions on (TT503HS) Two Trees Spring, please refer to the
Two Trees website.
www.twotreeshammocks.com.au or scan the below QR code.
Read instructions before use and keep for future reference.
Failure to read these instructions before use can lead to an
increased risk of injury. When installing always check with a
qualied builder for safety.
WARNING:
DO NOT EXCEED THE MAXIMUM LOAD OF 120KGS

50cm
50cm
50cm50cm
Hammock
Maximum
Length
> 120KGS
4
DO NOT twist or knot suspension cords
when hanging.
DO NOT leave children or pets
unattended in or near hammock.
DO NOT exceed the maximum load of
120kgs.
Allow a minimum of 50cm clearance
range around the perimeter of your
hammock when in use. <Fig.1>
NB: Traditional hammock shown for
reference, Illustration purposes only.
THINGS TO CONSIDER
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing always
check with a qualied builder for safety.

1.8m
Clearance
50-60cm
3.0m
Load bearing beam
5
HOW TO HANG
YOUR HAMMOCK
TEMPORARY INSTALLATIONS
For temporary installations, such as trees or beams, we recommend using the Two Trees
hammock hanging kit (TT501HK). For more information about our installation products please
visit our website (www.twotreeshammocks.com.au)
Place the cord around the pole
or tree, then thread through the
gure eight hook.
Thread the cord through the
clamp hook and secure at
desired length.
Repeat process for other
side of hammock. Ensure
both hooks are secure, place
hammock ends over hooks.
1 2
3
Should you not want to use your included stand and would like
to hang from a tree or structural beam, follow the below guide.
To hang your Two Trees hammock you will require one xed
point, such as a tree or structural beam. Consult a qualied
builder if unsure.
WARNING: Never attach hammock directly to a
ceiling or roof covering.
Your Two Trees hammock will require a sturdy xing point.
Rope or metal chain may be needed to attach to the xing point
if the hammock is to high o the ground. It is recommended to
use a double piece to avoid the hammock twisting. Consult a qualied builder is unsure.
Hang the hammock using the xing loop. As a guide when the hammock is in use it should sit
50-60cm above the ground so your feet can touch the ground.

6
ENJOYING
YOUR HAMMOCK
HOW TO RELAX IN YOUR HAMMOCK
CARING FOR YOUR HAMMOCK STAND
Ensure that no suspension
cords are twisted or in
a knot, with use your
hammock will stretch
5-10% overtime.
Sit down into the
hammocks as if sitting
on a chair, leaning back
gently back resting your
back against the back.
Gently open the
hammock chair and
adjust pillows to a
suitable positions.
To prolong the life of your hammock and frame its best to store away when not in use, as the
sun and rain will deteriorate the construction over time. If using near the sea it is important to
rinse your hammock regularly .
Hand washing is recommended for your Two Trees hammock chair. Prior to hand washing tie a
lose knot If possible or secure the ropes together to prevent tangles. Cold water hand washing
with non-bleach detergent. DO NOT tumble dry. DO NOT iron. Dry in shade. A light coating of
water resistant spray may help prevent the build up of dirt and dust over time.
1 2
3
STORING YOUR HAMMOCK
When storing your Two Trees hammock make sure the
hammock is clean and completely dry.
To prevent tangles place a knot in the suspension cord is
possible or secure the ropes together. fold the seat and ropes
together to form a compact square. Store in a dry place.
4
Feet may be gently lifted
of the ground as you sit
back and relax. Please
ensure that your feet are
able to touch the ground
in case of you need to
exit the hammock chair
and stand.

7
HAMMOCK CHAIR KIT
STAND PARTS
F
E
D
H
J
C
BJ
K
MI
G
A
L
ABase Tube A 1
BBase Tube B 1
CSupport Pipe A 1
DSupport Pipe B 1
EHanging Spring Hook 1
FBolt 1
GHexagon Socket Button Screw 4
HHexagonal Socket Screw Outer With Washer 2
I Hexagonal Socket Screw Outer 2
JScrew Cap 6
KDome Nut 2
LPlastic Stand Caps Large 6
MPlastic Stand Caps Small 2
NHexagonal Allen Key 1
OSpanner 1
LIST OF PARTS
HAMMOCK STAND SIZE: 100(Diameter) x 205(H)cm
Suitable for use with the Two Trees hammock chair only.

8
CHAIR HAMMOCK FRAME
ASSEMBLY INSTRUCTIONS
Assemble parts A+B(Hammock Base)
by sliding the tubing together and secure
using parts I+K(nut & Bolt) ensuring
that each component is tight using
the hexagonal Allen Key and spanner
provided.
Attach 4 x plastic support collars part L
at each corner of the circle to stabilise
the base. The collars should be equal
distances apart.
Secure support pole Cto the base using
parts J+ Gensuring that each component
is tight using the hexagonal Allen Key and
spanner provided.
3
2
1

9
CHAIR HAMMOCK FRAME
ASSEMBLY INSTRUCTIONS
Attach part D(Hammock Pole Extension)
into part Cusing parts J+ Hand ensure
they are securely tightened using the
hexagonal Allen Key and spanner
provided.
Take part F(Hammock Support Pin) and feed
it through the hole at the end of part D. Attach
part E(Hammock Spring) by threading the
hook through the end of part F.
Ensuring no suspension ropes are twisted,
hang your hammock onto the other end of
part E(suspension spring) place one pillow on
the seat and one at the back of the hammock
and enjoy!
Please refer to instruction on how to relax in
your hammocks for seating instructions.
5
4
6

10
NOTES

11
NOTES

12
Made in China exclusively for Mayo Hardware Pty Ltd
4 Secombe Place, Moorebank NSW 2170 Australia
Customer Service Phone: [phone]
www.mayohardware.com.au | 2021©
For more information visit
www.twotreeshammocks.com.au
We will honour all statutory guarantees that this product is
of acceptable quality. (including that it is t for purpose)
Issue A