twotrees TT402DK User manual

200KG CAPACITY
HAMMOCK FABRIC SIZE: 160(W) x 210(L)cm
HAMMOCK STAND MAX SIZE: 330(L) x 100(W) x 100(H)cm
DOUBLE
HAMMOCK KIT
TT402DK
PRODUCT MANUAL
WARNING
Read instructions before use and keep for future reference. Failure to read
these instructions before use can lead to an increased risk of injury. When
installing always check with a qualied builder for safety. Two Trees will
only guarantee the performance of this product when used with other Two
Trees products. i.e. if non Two Trees hammocks or stand are used, the
guarantee is void.

2
Thank you for purchasing a Two Trees hammock.
We at Two Trees know the importance of spending time relaxing. Hence we’ve developed
a range of quality hammocks and convenient accessories that come with easy to follow
instructions so that you will be relaxing in no time. It is important to read all instructions before
use and take care when using your hammock. Please ensure that you adhere to the following
safety measures to get the maximum enjoyment from your new hammock.
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing always
check with a qualied builder for safety.
1. Assembly must be carried out by an Adult.
2. Ensure hammock is fully assembled
before use.
3. DO NOT exceed the maximum load of
200kgs.
4. The maximum capacity of the hammock
stand is 200kgs, only if hooks and screws
are secured into position according to the
instructions provided.
5. DO NOT climb into hammock feet rst.
6. DO NOT stand in hammock.
7. DO NOT dive into or jump about in
hammock.
8. DO NOT stick your head through the
suspension cords.
9. Keep suspension cords as straight as
possible, DO NOT twist.
10. Inspect frame feet and ensure they are
stable before use.
11. DO NOT use damaged or weakened
hammock hanging accessories.
12. Hammock fabrics and accessories will
wear over time and use. Always check the
loading capacity and condition of parts
before use.
13. Hammocks are not designed for swinging,
playing, climbing or to be used as a
children’s toy.
14. DO NOT leave children or pets unattended
in or near hammock.
CAUTION AND SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
15. Hammock fabric, suspension cords and
hanging accessories will become worn
over time and use. Always inspect prior to
use and DO NOT use if items show signs
of damage or weakness.
16. Always check the loading capacity before
use.
17. Keep hammock clear of obstructions.
18. Allow a minimum of 50cm clearance range
around the perimeter of your hammock
when in use (Fig. 1).
19. Only use the hammock on level oors with
shock-absorbing properties such as
carpet or outdoor grass to minimise the
risk of injury in case of an accident.
DO NOT use on slippery or hard surfaces.
20. Never use a free standing brick wall to
hang your hammock.
21. Only use Two Trees accessories for
hanging your hammock.
22. DO NOT modify hammock. Hammock
must be used in accordance of this
manual.
23. DO NOT smoke in or around the
hammock. Keep away from heat or
ames.
24. DO NOT use whilst wearing shoes,
clothing, jewellery or accessories that have
a hook and loop fastener.
25. DO NOT use near sharp objects.
26. A copy of this manual must be provided
should the hammock transfer ownership.

THE TWO TREES
HAMMOCKS RANGE INCLUDES
3
SAFETY INSTRUCTIONS
There are many ways to hang your hammock,
here are some of our favourite and recommended
options:
BETWEEN
TWO POSTS
BETWEEN
TREES
BETWEEN
TWO WALLS
ON HAMMOCK
STAND
SELECTING THE LOCATION

50cm
50cm
50cm50cm
Hammock
Maximum
Length
> 200KGS
4
DO NOT twist or knot suspension cords
when hanging.
DO NOT leave children or pets
unattended in or near hammock.
DO NOT exceed the maximum load
of 200kgs.
Hammocks will stretch by 5-10% after
the rst few uses. Adjustments can be
made after each use to keep you and your
hammock comfortable.
Allow a minimum of 50cm clearance
range around the perimeter of your
hammock when in use. <Fig.1>
THINGS TO CONSIDER
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing always
check with a qualied builder for safety.
You need a minimum of 3.2 metres space
to fully assemble this hammock kit. At rst,
the included hammock will require 3 metres
to get the ideal shape. However, through
use of your hammock will naturally stretch
and sag. This is why we’ve added a 20cm
extension to your hammock stand, so you
can adjust your hammock and continue
relaxing.

3.0m
1.8m
20 - 30cm
5
HOW TO HANG
YOUR HAMMOCK
TEMPORARY INSTALLATIONS
For temporary installations, such as trees or beams, we recommend using the Two Trees
hammock hanging kit (TT501HK). For more information about our installation products please
visit our website (www.twotreeshammocks.com.au)
Place the cord around the pole
or tree, then thread through the
gure eight hook.
Thread the cord through the
clamp hook and secure at
desired length.
Repeat process for other side of
hammock. Ensure both hooks are
secure, place hammock ends over
hooks.
1 2
3
To hang your Two Trees hammock you will require
two xed points, such as trees, beams, posts, or
dyna bolts into brick walls. Alternatively you can
purchase a Two Trees Universal Stand. Consult a
qualied builder if unsure.
WARNING: Never use a free standing
brick wall to hang your hammock.
Your Two Trees hammock will require a minimum of 3 metres between xing points to get the
ideal shape. Rope may be needed to attach one end of the hammock, it is recommended to
use a double piece to avoid the hammock twisting.
Hang the hammock loops at roughly the same height. When the hammock is in use it should sit
20-30cm above the ground.

Hammock Spring
Hammock Hook
Strong & Secure
6
HOW TO HANG
YOUR HAMMOCK
We recommend using the Two
Trees screw eye and hook
(TT502HH) with the Two Trees
springs (TT503HS) The spring
is optional.
NOTE: It is recommended
to use structurally sound,
strong timber posts that are
10cm square or more. When
installing always check with a
qualied builder for safety.
For sturdy masonry walls (not air/hollow/single brick or besser block) a 10mm dyna bolt with a
large washer and rope can be used.
For detailed installation instructions on (TT503HS) Two Trees Spring, please refer to the
Two Trees website.
www.twotreeshammocks.com.au or scan the below QR code.
Read instructions before use and keep for future reference. Failure
to read these instructions before use can lead to an increased risk
of injury. When installing always check with a qualied builder for
safety.
WARNING:
DO NOT EXCEED THE MAXIMUM LOAD OF 200KGS
PERMANENT INSTALLATIONS
TEMPORARY INSTALLATIONS
For Temporary instillations that are portable and do not require a xed point we recommend
using the Two Trees stand that was included in your double hammock kit (TT402DK).
Assemble and set up your double
hammock kit stand according to
the included instructions that were
included in your kit.
Attach the hammock onto the hooks at
either end ensuring the hammock and
suspension cords are not twisted.
12

7
ENJOYING
YOUR HAMMOCK
HOW TO RELAX IN YOUR HAMMOCK
CARING FOR YOUR HAMMOCK STAND
Open the hammock fabric in the centre of
the hammock and slowly and safely sit in
the middle as you would in a chair.
Bring your feet in and stretch them out, so you
are lying on a diagonal. This is the traditional
way to relax in a classic style hammock.
Gently lie back on a diagonal with your
head on the edge of the hammock.
To prolong the the life of your hammock and stand it is best to store away when not in use, as
the sun and rain will deteriorate the construction over time. If using near the sea it is important
to rinse your hammock regularly.
Prior to washing your hammock, tie a loose single knot in the suspension cords at both hanger
ends. Machine wash with cold water on a regular cycle using non-bleach detergent. DO NOT
tumble dry. DO NOT iron. Dry in shade.
1 2
3
STORING YOUR HAMMOCK
When storing your Two Trees hammock make sure hammock is
clean and completely dry.
To prevent tangles place a knot in each suspension cord. Fold
the hammock in half, with suspension cords together. Then fold
the edges of the hammock to the centre, and roll the hammock
up starting with the suspension cords. Store in a dry place.

DE
A
B
C
GF
H
8
A Metal arm pipe with xed screws, 42mm DIA x 1060mm 2
BEnd angle tube 2
CCenter base spreader tube, 36mm DIA x 540mm 1
DMetal stand pipe, 40mm DIA x 985mm 2
EPlastic stand feet 4
FPlastic inside collar 4
GPlastic external collar 2
HTri-wing hand screws 10
IDouble polycotton hammock 1
LIST OF PARTS
HAMMOCK STAND MIN SIZE: 310(L) x 100(W) x 10 0(H)cm
Suitable for hammocks with a minimum of 280cm from end to end
HAMMOCK STAND MAX SIZE: 330(L) x 100(W) x 100(H)cm
Suitable for hammocks with a maximum of 300cm from end to end
DOUBLE HAMMOCK KIT
STAND PA RTS

B
D
F
H
Small Brace Tube
B
B
C
H
G
H
B
A
9
HAMMOCK STAND
ASSEMBLY INSTRUCTIONS
1
3
2
a. Place F(plastic inside collars) in either
side of the small brace tube of B
(end angle tube).
b. Insert D(metal stand pipe) into either
side of the small brace tube of B
(end angle tube).
c. Secure with H(tri wing hand screws).
d. Repeat on either side.
a. Insert G(plastic external collars) on
straight end of either side of B
(end angle tube).
b. Take C(centre base spreader tube) and
join both B(end angle tubes) together.
c. Fix into place with four of H(tri wing
hand screws).
a. Attach A(metal arm pipe) on top angle
end of B(end angle tube).
b. Fix into place with one of H(tri wing
hand screws).
c. Repeat on other side.

D
E
I
C
10
5
4
6
HAMMOCK STAND
ASSEMBLY INSTRUCTIONS
a. Take E(plastic stand feet) and attach
to end of D(metal stand pipe).
b. Repeat on all sides.
a. Attach I(double polycotton hammock)
into the hooks at either end.
b. Ensure that the hammock and
suspension cords are not twisted.
a. Ensure all tri wing hand screws are
secured and tightened before use.
b. Ensure the hammock is set to the
minimum size setting for initial use.
c. To adjust the length of your stand for
your hammock, extend or shorten the
xtures on C. (centre base spreader tube).
Note: Your hammock will hang taut on the
initial set up. With use, your hammock will
stretch and hang in a more relaxed position.

11
NOTES

12
Made in China exclusively for Mayo Hardware Pty Ltd
4 Secombe Place, Moorebank NSW 2170 Australia
Customer Service Phone: [phone]
www.mayohardware.com.au | 2021©
For more information visit
www.twotreeshammocks.com.au
We will honour all statutory guarantees that this product is
of acceptable quality. (including that it is t for purpose)
Issue A