Ty Pennington Style D71 M50172 User manual

TM
Parkside 7pc Dining Set-Armless Chair
Product Code: D71 M50172
UPC Code: 848306016758

m
m
r
t
u
o
h
t
i
w
r
i
a
h
C
g
n
i
n
i
D
D
n
nnn
i
iii
Safety Information
Pre-Assembly............................. 6
PlanningAssembly ........................ 6
Observe Weight Limits.................. 6
Package Contents.......................... 7
Hardware Included ........................ 6
Table of Contents................................
Care And Maintenance
Chair-Armless
Dining

This product is covered under the manufacturer's 2-Year Limited
Warranty against defects in materials and workmanship. If your furniture
frame fails structurally due to inferior metals or welds during normal use
within two years of purchase, the manufacturer will repair or replace the defective
piece. Peeling, crackling, blistering, discoloration or fading are warranted
for 1-Year from the date of purchase. Resin weave and cushions are warranted for
1-Year from date of purchase. Warranty is to the original purchaser and is
non-transferable. Proof of purchase (dated register receipt) and in some cases,
photos of product are required for warranty claims. Lack of original receipt will void
the warranty. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.

This warranty excludes: furniture used for commercial use, contract or
other non-residential purposes, freight damage, furniture damaged by
acts of nature, abuse or lack of proper care, vandalism or improper
assembly. Discoloration or fading of straps or fabric or finish as a result
of chemicals or spills is not covered. Glass, tile, and stone are not
covered against breakage; frames and hardware are not covered
against corrosion or rusting. In addition, purchased parts are not
covered under this warranty. We reserve the right to make substitutions
with similar merchandise, if the model in question is no longer in
production. Exclusion also includes time for loss of use, inconvenience,
travel, packaging or any other incidental or consequential damages. It
remains the customer's responsibility for freight and packaging charges
to and from our service center. If, within the stated warranty period, this
product is found to be defective in material or workmanship, the
purchaser must contact the customer service department at
1-877-931-7378.
Email: [email protected]
Customer Service hours: Monday to Friday 9:00AM - 5:00PM CST

4
4
2
10
10
1
M6
M6
ALLEN BOLT
ALLEN BOLT
ALLEN BOLT
AA
BB
CC
DD
EE
FF
REHSAWLATEM
HCNERWNELLA
To prevent damage, place all parts on a soft surface during assembly.
Remove all protective caps before beginning assembly. It takes about
20 minutes for two people to complete the assembly.
Hardware not shown
to actual size.
SIZE (MM) QUANTITY
NOTE
M6x35
M6x25
M6x18
CAUTION: If you overload your
furniture, injuries can occur.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
HARDWARE INCLUDED
CC DD EE FFBBAA
Dining Chair: 250 lbs.
PLASTIC BOLT CAP

A
EA
B
DC
1
1
1
1
B
C
D
RIGHT SIDE PANEL (when sitting)
LEFT SIDE PANEL (when sitting)
CHAIR BACK
CHAIR SEAT
1
ESEAT CUSHION

AA
x2 DD x2 A
A
C
t side panel to chair backhgirehtgnihcattA
Attach the right side panel "A" to the chair back "C" using two Allen bolts "AA" and metal washers "DD".
.yletelpmocnethgittonoD
AA DD

r seat and backiahcside panels,ehtgnihcattA
Tighten all the bolts using Allen wrench "FF".
D”.Ds “rehsawla
etmdna"CC"using two Allen bolts"C"kcabriahcehtot"D"r seatiahcehthcattA
AA
x2 BB x4
CC
x2 DD D
B
x8
FF
FF
x1 BB
DD
DD CC
t side panel “A” using two Allen bolts “BB” andhgirdelbmessaehtot"D"seatriahcfotnorfehthcattA .yletelpmocnethgittonoD."DD"srehsawlatem h the left side panel “B” to the chair back “C” using two Allen bolts “AA” and metal washers “DD”.cattA
Attach the front of the chair seat “D” to the assembled left side panel “B” using two Allen bolts “BB” and
.yletelpmocnethgittonoD."DD"srehsawlatem

."EE"spacboltcitsalpehthtiwstlobehtllarevoC
Place the seat cushion "D" on the chair.
EE
x10
E
EE
Placing the seat cushion

Made in / Hech en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Email: [email protected] or Call toll-free: 1-877-931-7378
Please refer to part numbers when reordering
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com

Parkside 7pc Dining Set-Chair with Armrest
Product Code: D71 M50172
UPC Code: 848306016758
TM

Safety Information
Pre-Assembly............................. 6
PlanningAssembly ........................ 6
Observe Weight Limits.................. 6
Package Contents.......................... 7
Hardware Included ........................ 6
Table of Contents................................
Care And Maintenance
m
r
A
t
u
o
h
t
i
w
r
i
a
h
C
g
n
i
n
i
D
D
n
nnn
i
iii
Dining chair with armrest

This product is covered under the manufacturer's 2-Year Limited
Warranty against defects in materials and workmanship. If your furniture
frame fails structurally due to inferior metals or welds during normal use
within two years of purchase, the manufacturer will repair or replace the defective
piece. Peeling, crackling, blistering, discoloration or fading are warranted
for 1-Year from the date of purchase. Resin weave and cushions are warranted for
1-Year from date of purchase. Warranty is to the original purchaser and is
non-transferable. Proof of purchase (dated register receipt) and in some cases,
photos of product are required for warranty claims. Lack of original receipt will void
the warranty. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.

This warranty excludes: furniture used for commercial use, contract or
other non-residential purposes, freight damage, furniture damaged by
acts of nature, abuse or lack of proper care, vandalism or improper
assembly. Discoloration or fading of straps or fabric or finish as a result
of chemicals or spills is not covered. Glass, tile, and stone are not
covered against breakage; frames and hardware are not covered
against corrosion or rusting. In addition, purchased parts are not
covered under this warranty. We reserve the right to make substitutions
with similar merchandise, if the model in question is no longer in
production. Exclusion also includes time for loss of use, inconvenience,
travel, packaging or any other incidental or consequential damages. It
remains the customer's responsibility for freight and packaging charges
to and from our service center. If, within the stated warranty period, this
product is found to be defective in material or workmanship, the
purchaser must contact the customer service department at
1-877-931-7378.
Email: [email protected]
Customer Service hours: Monday to Friday 9:00AM - 5:00PM CST

4
4
2
10
10
1
M6
M6
ALLEN BOLT
ALLEN BOLT
ALLEN BOLT
AA
BB
CC
DD
EE
FF
REHSAWLATEM
HCNERWNELLA
To prevent damage, place all parts on a soft surface during assembly.
Remove all protective caps before beginning assembly. It takes about
20 minutes for two people to complete the assembly.
Hardware not shown
to actual size.
SIZE (MM) QUANTITY
NOTE
M6x35
M6x25
M6x18
CAUTION: If you overload your
furniture, injuries can occur.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
HARDWARE INCLUDED
CC DD EE FFBBAA
m
r
A
t
u
o
h
t
i
w
r
i
a
h
C
g
n
i
n
i
D
D
nnnn
i
iii
Dining Chair: 250 lbs
PLASTIC BOLT CAP

A
B
C
A
D
E
1
1
1
1
B
C
D
RIGHT ARM (when sitting)
LEFT ARM (when sitting)
CHAIR BACK
CHAIR SEAT
1ESEAT CUSHION

AA
x2 DD x2
A
A
C
AA
DD
kcabriahcehtotmrathgirehtgnihcattA
Attach the right arm "A" to the chair back "C" using two Allen bolts "AA" and metal washers "DD".
.yletelpmocnethgittonoD

AA
x2 BB x4
CC
x2 DD x8
FF
x1
BB
D
B
AA
FF DD
DD
DD CC
Attaching the left and right arms, chair seat and back
Tighten all the bolts using Allen wrench "FF".
D”.Ds “rehsawla
etmdna"CC"using two Allen bolts"C"kcabriahcehtot"D"r seatiahcehthcattA t arm “A” using two Allen bolts “BB” andhgirdelbmessaehtot"D"seatriahcfotnorfehthcattA .
yletelpmocnethgittonoD."DD"srehsawlatem h the left arm “B” to the chair back “C” using two Allen bolts “AA” and metal washers “DD”.cattA
Attach the front of the chair seat “D” to the assembled left arm “B” using two Allen bolts “BB” and
.yletelpmocnethgittonoD."DD"srehsawlatem