Ty Pennington Style PALMETTO D71 M20309 User manual

Date of purchase: _____/ _____/ _____
Product code: D71 M20309
UPC code: 471 333112 181 3
1
Vendor Item: SS-K-233NR/6
Use and Care Guide
TM
PALMETTO 7PCS DINING SET

Thank you for your purchase
Thank you for your purchase
We are pleased that you have chosen Sears for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes your patio furniture needs, so from our team to yours, thank you for letting us
be a part of your outdoors.
Table of Contents
Table of Contents.......................................2
Safety Information......................................3
Set Up your Furniture Properly................3
Examine your furniture............................3
Warranty......................................................3
Care and Maintenance.............................. 4
Pre-Assembly.............................................4
Planning Assembly..................................4
Observe weight Limits.............................4
Hardware Included..................................4
Assembly Instructions
Package Content........................................5
Chair............................................................6
Rocker.........................................................8
Customer Service.......................................9
2

3
Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
Warranty
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser for
the period listed below. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential purposes;
failures caused by improper care; unreasonable or abusive use; freeze damage; acts of
nature. Steel products are not covered against rust. Tempered glass table tops are not
covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
two (2) years for steel frame. This product is made with a steel frame.
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
CUSTOMER SERVICE
In case of a problem, call
1-800-457-4652
between 9:00 am to 5:00 pm Eastern standard
time Monday through Friday or contact us at www.numarkcustomerservice.com
for
any question or problems you may have.

Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
CAUTION: If you overload your
furniture, injuries can occur.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
Chair
Rocker: 225 lbs
: 225 lbs
Kk (1)
Assembly
Instructions Sheet
4
Ka (24 + 2 spare)
M6 Short Bolt
Kb (28 + 2 spare)
M6 Long Bolt
Kd (52)
M6 Metal Washer
Kh (2)
Allen Wrench
Kc (4)
M8 Bolt
Ke (4)
M8 Metal Washer
Kf (4)
M8 Locker
Kg (4)
M8 Nut
Ki (1)
Open Hex Wrench
Kj (1)
M8 Hex Wrench

Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Assembly Instructions
Package Contents
5
Pre-Assembly
A Chair Left Arm
B Chair Right Arm
C Chair Sling Seat And Back
D Chair Connection Bar
E Chair Rear Connection Bar
4
4
4
4
4
ITEM DESCRIPTION QUANTITY
B
A
D
C
E

6
Assembly Instructions
Don’t tighten completely.
Repeat procedure for the other side.
1
.
.
Attaching the chair connection bar to the chair arm
2 Attaching the chair sling seat and back to the chair arm
Don’t tighten completely.
Repeat procedure for the other arm.
.
.
B
A
D
Kd
D
Ka
B
Ka x 4
M6 Short Bolt
Kd x 4
M6 Metal Washer
Kb x 4
M6 Long Bolt
Kd x 4
M6 Metal Washer
Kd
Kb
C
B
B
C
A
C
Kb
B
Kd

Assembly Instructions
7
3 Attaching the rear connection bar to the chair arm
Don’t tighten completely.
Repeat procedure for the other side.
Securely tighten all bolts
Repeat procedure for the other three chairs.
.
.
.
A
Ka
E
Kd
A
E
B
Ka x 2
M6 Short Bolt
Kd x 2
M6 Metal Washer
.
F Rocker Left Arm
G Rocker Right Arm
H Rocker Sling Seat And Back
I T-shaped Bracket
J Rocker Base
2
2
2
2
2
ITEM DESCRIPTION QUANTITY
Package Contents
J
I
H
F
G

Assembly Instructions
8
G
Kd
Kb
H
F
H
G
H
Kd
Kb
G
Kb x 6
M6 Long Bolt
Kd x 6
M6 Metal Washer
1 Attaching the sling seat and back to the rocker arm
Don’t tighten completely.
Repeat procedure for the other arm.
Securely tighten all bolts.
.
.
2 Attaching the T-shaped bracket to the rocker sling seat and back
Kg
Ke
I
Kc
Kf
H
H
I
Ke x 2
M8 Metal Washer
Kf x 2
M8 Locker
Kg x 2
M8 Nut
Kc x 2
M8 Bolt
Don’t tighten completely.
Repeat procedure for the other arm.
Securely tighten all bolts.
.
.
.
.

Your chairs is now ready for use.
.
9
Assembly Instructions
3 Pushing the T-shaped bracket to the rocker base
I
J
Repeat procedure for the other motion chair.
.
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Call toll-free: 1-
800-457-4652
Please refer to part numbers when reordering
between 9:00 am to 5:00 pm Eastern standard time Monday through Friday
or contact us at www.numarkcustomerservice.com

Date of purchase: _____/ _____/ _____
Product code: D71 M20309
UPC code: 471 333112 181 3
1
Vendor Item: SS-K-233NT
Use and Care Guide
TM
PALMETTO 7PCS DINING SET

Thank you for your purchase
Thank you for your purchase
We are pleased that you have chosen Sears for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes your patio furniture needs, so from our team to yours, thank you for letting us
be a part of your outdoors.
Table of Contents
Table of Contents.......................................2
Safety Information......................................3
Set Up your Furniture Properly................3
Examine your furniture............................3
Warranty......................................................3
Care and Maintenance.............................. 4
Pre-Assembly.............................................4
Planning Assembly..................................4
Observe weight Limits.............................4
Hardware Included..................................4
Assembly Instructions
Package Content........................................5
Table............................................................6
Customer Service.......................................8
2

3
Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
Warranty
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser for
the period listed below. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential purposes;
failures caused by improper care; unreasonable or abusive use; freeze damage; acts of
nature. Steel products are not covered against rust. Tempered glass table tops are not
covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
two (2) years for steel frame. This product is made with a steel frame.
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
CUSTOMER SERVICE
In case of a problem, call
1-800-457-4652
between 9:00 am to 5:00 pm Eastern standard
time Monday through Friday or contact us at www.numarkcustomerservice.com
for
any question or problems you may have.

Fe (1)
Assembly
Instructions Sheet
4
Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Table: 100 lbs
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
CAUTION: If you overload your
furniture, injuries can occur.
Fa (1 spare)
Bolt
Fb (4 spare）
Thicker Tile Bumper
Fd (1)
Allen Wrench
Fc (4 spare)
Thinner Tile Bumper
Tabletop ceramic tiles must be stored during fall and winter months in a dry location
where temperatures will not fall below 32°F (0°C).Always use an umbrella base to
secure umbrella.Ensure the “o” ring is in place in the umbrella hole in the
glass top before inserting umbrella. Make sure umbrella is in the closed
position when not in use and during high winds.Use furniture covers or store
indoors during cold or inclement weather.

A Table Rim (8 Bolts and 8 Metal Washers attached）
B Metal Leg (2 Bolts and 2 Metal Washers attached for each）
C Metal Center Ring
D Large Tile
E Small Tile
1
2
1
4
2
ITEM DESCRIPTION QUANTITY
Assembly Instructions
Package Contents
5
A
D
E
BCB

6
Don’t tighten completely.
Repeat procedure for the other side.
Repeat procedure for the other leg.
Assembly Instructions
1
.
.
Attaching the leg to the table rim
2 Attaching the metal center ring to the table rim
M6 Metal Washer x 8
(Remove from the table rim)
A
B
A
B
Fa
Fa x 8
Bolt
(Remove from the table rim)
.
C
A
C
A
C
A

Assembly Instructions
3
Don’t tighten completely.
Repeat procedure for the other side.
.
.
7
C
B
Fa
C
B
Attaching the metal center ring to the table rim
M6 Metal Washer x 4
(Remove from the leg)
Fa x 4
Bolt
(Remove from the leg)
D
E
4Putting tiles into the table rim

Assembly Instructions
Securely tighten all bolts in a digonal pattern.
.
8
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Call toll-free: 1-
800-457-4652
Please refer to part numbers when reordering
between 9:00 am to 5:00 pm Eastern standard time Monday through Friday
or contact us at www.numarkcustomerservice.com
A
Fc
Fb
5Using tile bumper to adjust the tabletop level if needed
Your table is now ready for use.
.