Ty Pennington Style KEY LARGO SECTIONAL SOFA SET User manual

Use and Care Guide
Date of Purchase: _____/ _____/ _____
TM
KEY LARGO SECTIONAL SOFA SET
Product Code: D71 M20713
KSN: 08824327-4
UPC Code: 885227002743

2
Thank you for your purchase
Table of Contents
Thank you for your purchase!
We are pleased that you have chosen Sears for your outdoor furniture
purchase. We hope that you enjoy the unmatched quality, comfort, and
style of your new patio set. Every piece is meticulously considered all the
way down to the smallest details, exclusively for you, by our world class
design team. We know you have a choice when it comes to your patio
furniture needs, so from our team to yours, thank you for letting us be a part
of your outdoors.
Table of Contents.......................... 2
Safety Information......................... 3
Set Up Your Furniture Properly..... 3
Examine your furniture................ 3
Warranty......................................... 3
Care and Maintenance.................. 4
Pre-Assembly................................. 4
Planning Assembly...................... 4
Observe weight Limits................. 4
Assembly Instructions
Corner chair.................................. 5
Left arm chair................................ 7
Right arm chair.............................. 9
Armless chair................................ 11
Ottoman......................................... 13

WARRANTY
EXAMINE YOUR FURNITURE
SET UP YOUR FURNITURE PROPERLY
Frames are warranted to be free from defects in material or workmanship for a
period of one (1) year.
Resin wicker is warranted to be free from defects in material or workmanship for
a period of one (1) year.
Cushions are covered for a period of one (1) year against defects in material or
workmanship
This limited warranty is extended to the original purchaser and applies to defects
in material and workmanship of your patio furniture, provided your furniture is
maintained with care and used only for personal, residential purposes.
Exclusions: Items used for commercial, contract, or other non-residential purposes,
or items damaged due to acts of nature, vandalism, misuse, or improper assembly is
not covered. Discoloration and fading of the finish or fabrics as a result of chemicals
or spills are not covered. Glass table top breakage and corrosion or rusting of
hardware is not covered. If, within the stated warranty period, this product is found to
be defective in material or workmanship, the purchaser must contact the customer
service department at1-888-577-9825 the manufacturer, at its option, will repair or
replace the defectives parts. Proof of purchase (date register receipt) is required for
warranty claims. It remains the customer’s responsibility to pay for freight and
packing charges to and from the service center. Warranty is to the original purchaser
and is non-transferable. Any replacement of warranted items will be in the original
style and color, or a similar style and color if the original is unavailable or has been
discontinued. As some states do not allow exclusions or limitations on an implied
warranty, the above exclusions and limitations may not apply. This warranty gives
you specific rights, and you may also have other rights, which vary from state to state.
Customer service 1-888-577-9825
Examine occasionally to ensure that there are no loose parts. If loose parts are
found, they must be retightened fully before additional use.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item
stands in a rigid position.
Ensure that all parts are assembled properly and fully tightened as per the
instructions.
3
Warranty
Safety Information

PLANNING ASSEMBLY
OBSERVE WEIGHT LIMITS
When not in use, protecting furniture from the elements is highly recommended.
To prevent damage, place all parts on a soft surface during assembly. Remove all
protective caps before beginning assembly. It takes about 60 minutes for two
person to complete all the assembly.
The recommended weight limits for the following products are listed below:
Chair：250lbs
Swivel Chair：250lbs
Loveseat：450lbs
Ottoman：150lbs
Table：50lbs
Sofa：650lbs
Chaise：250lbs
Wipe frame with a lightly damp cloth and dry completely, do not use bleach or
solvents.
Wash cushions with mild solution of soap and water, rinse thoroughtly. Do not
machine wash.
4
Care and Maintenance
Pre-Assembly
CAUTION: If you overload your
furniture, injuries can occur.

1. EVERY BOLT NEEDS TO BE USED WITH A WASHER.
2 .DO NOT TIGHTEN BOLTS ALL THE WAY UNTIL YOU HAVE ASSEMBLED THE CHAIR.
ONCE ASSEMBLY IS COMPLETE, GO BACK AND TIGHTEN EACH BOLT.
5
SEAT OF
CHAIR
SEAT
CUSHION
BACK
CUSHIONS
A
B
C
CODE PARTS DESCRIPTION QTY.
1
D4
E1
F2
1
1
Assembly Instructions
Safety Information
Package Contents
LEGS
BACK 1 OF
CHAIR
BACK 2 OF
CHAIR
CODE PARTS DESCRIPTION QTY.
I4
GBOLTS
& WASHERS
M6x35mm
7
HCAPS FOR
BOLTS
M6
7
NUTS
& WASHERS
M8
J4
CAPS FOR
NUTS
M8

6
Assembly Instructions
12
3 4
D
I
J
D
E
F
B
C
G
A
G
H
Step 1: Connect the back B to the seat frame C.Step 2: Connect the back A to the seat C.
Step 3: Connect four legs D to the seat. Step 4: Turn the assembling chair upward
as shown, fully tighten all the bolts
then check and adjustment as needed.
Cover the bolts with caps H.

1. EVERY BOLT NEEDS TO BE USED WITH A WASHER.
2 .DO NOT TIGHTEN BOLTS ALL THE WAY UNTIL YOU HAVE ASSEMBLED THE CHAIR.
ONCE ASSEMBLY IS COMPLETE, GO BACK AND TIGHTEN EACH BOLT.
7
LEFT ARM
SEAT OF
CHAIR
SEAT
CUSHION
BACK
CUSHION
A
B
C
CODE PARTS DESCRIPTION QTY.
1
D4
E1
F1
1
1
Assembly Instructions
Safety Information
Package Contents
G
H
K
CODE PARTS
LEGS
BACK OF
CHAIR
BOLTS
& WASHERS
CAPS FOR
BOLTS
ALLEN
WRENCH
M6x35mm
M6
M6
DESCRIPTION QTY.
7
I4
J4
1
L1
7
NUTS
& WASHERS
ALLEN
WRENCH
M8
M8
CAPS FOR
NUTS
M8

8
Assembly Instructions
1 2
34
D
I
J
E
F
B
CG
A
G
H
Step 1: Connect the back B to the seat C.
Step 3: Connect four legs to the Seat. Step 4: Turn the assembling chair upward
as shown, fully tighten all the bolts
then check and adjustment as needed.
Cover the bolts with caps H
Step 2: Connect the left arm A to the seat.

1. EVERY BOLT NEEDS TO BE USED WITH A WASHER.
2 .DO NOT TIGHTEN BOLTS ALL THE WAY UNTIL YOU HAVE ASSEMBLED THE CHAIR.
ONCE ASSEMBLY IS COMPLETE, GO BACK AND TIGHTEN EACH BOLT.
9
Assembly Instructions
Safety Information
Package Contents
RIGHT ARM
SEAT OF
CHAIR
SEAT
CUSHION
BACK
CUSHION
A
B
C
CODE PARTS DESCRIPTION QTY.
1
D4
E1
F1
1
1
G
H
CODE PARTS
LEGS
BACK OF
CHAIR
BOLTS
& WASHERS
CAPS FOR
BOLTS
M6x35mm
M6
DESCRIPTION QTY.
7
I4
J4
7
KALLEN
WRENCH
M6 1
NUTS
& WASHERS
M8
CAPS FOR
NUTS
M8

D
I
J
10
Assembly Instructions
1 2
34
G
D
C
G
BA
E
FH
Step 1: Connect the back B to the seat C. Step 2: Connect the right arm A to the seat.
Step 4: Turn the assembling chair upward
as shown, fully tighten all the bolts
then check and adjustment as needed.
Cover the bolts with caps H.
Step 3: Connect the four legs D to the seat.

1. EVERY BOLT NEEDS TO BE USED WITH A WASHER.
2 .DO NOT TIGHTEN BOLTS ALL THE WAY UNTIL YOU HAVE ASSEMBLED THE CHAIR.
ONCE ASSEMBLY IS COMPLETE, GO BACK AND TIGHTEN EACH BOLT.
11
F
G
J
CODE PARTS
SEAT OF
CHAIR
LEGS
BACK OF
CHAIR
SEAT
CUSHION
BACK
CUSHION
BOLTS
& WASHERS
CAPS FOR
BOLTS
ALLEN
WRENCH
M6x35mm
M6
M6
DESCRIPTION QTY.
4
H4
I4
1
K1
4
A
B
CODE PARTS DESCRIPTION QTY.
1
C4
D1
E1
1
Assembly Instructions
Safety Information
Package Contents
NUTS
& WASHERS
ALLEN
WRENCH
M8
M8
CAPS FOR
NUTS
M8

C
H
I
A
12
Assembly Instructions
1
2
3
C
D
E
B
F
G
Step 1: Connect the back A to the seat B.
Cover the bolts with caps G.
Step 2: Connect four legs to the seat, cover the bolts with cap I.
Step 3: Turn the assembling chair upward as shown,
fully tighten all the bolts, check and make
adjustment if needed.

1. EVERY BOLT NEEDS TO BE USED WITH A WASHER.
2 .DO NOT TIGHTEN BOLTS ALL THE WAY UNTIL YOU HAVE ASSEMBLED THE CHAIR.
ONCE ASSEMBLY IS COMPLETE, GO BACK AND TIGHTEN EACH BOLT.
13
D
E
CODE PARTS
SEAT
CUSHION
DESCRIPTION QTY.
4
4
A
B
CODE PARTS DESCRIPTION QTY.
4
C1
1
Assembly Instructions
Safety Information
Package Contents
TABLE FRAME
LEGS
NUTS
& WASHERS
M8
CAPS FOR
NUTS
M8

14
Assembly Instructions
1
2
BA
C
B
D
E
Step 1: Connect four legs B to the frame A, cover the bolts with caps E.
Step 2: Turn the assembling ottoman upward as shown,
fully tighten all the bolts and make adjustment as needed.

15
Snap Fit
Please use snap fit to connect each section.
The snap fit connectors help you to lock the sectional
pieces together.

Made in / Hech en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Email：[email protected] or Call toll-free: 1-888-577-9825
SERVICE HOURS: Monday – Friday 8:00AM to 8:00PM EST
Please refer to part numbers when reordering
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com