Ty Pennington Style Sunset Beach Deluxe D71 M20530 User manual

1
Date of purchase: _____/ _____/ _____
Product Code: D71 M20530
KSN: 0-08770597-6
UPC Code: 749241315213
Sunset Beach Deluxe Lighted & Music Hardtop Bar
w/ 4 stools

Thank you for your purchase
Thank you for your purchase!
We are pleased that you have chosen Sears for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes to your patio furniture needs, so from our team to yours, thank you for letting
us be a part of your outdoors.
Table of contents
Table of Contents ....................................................................................2
Safety Information ..................................................................................3
Set Up your Shelter Properly ................................................................3
Examine your Shelter ............................................................................3
Warranty ..................................................................................................3
Excluded ................................................................................................3
Service Center .......................................................................................3
Care and Maintenance ............................................................................4
Pre-Assembly ...........................................................................................5
Hardware Included ................................................................................5
Package Contents ..................................................................................6
Assembly Instructions .............................................................................9
Customer Service ....................................................................................35
2

Safety Information
SET UP YOUR SHELTER PROPERLY
Please read and understand this entire manual before attempt to assemble, operate, or
install the product.
If any part is missing or damaged. Do not attempt to assemble the product.
Two to four people are needed for assembly.
In order to avoid damage to the gazebo and its components please use appropriate tools.
Do not use the structure as support.
Check all bolts on a regular basis to maintain the solidity of the structure.
Keep instructions for future use.
Approximate time: 3 – 4 hours
.
EXAMINE YOUR SHELTER
Examine occasionally to ensure there are no loose parts. If loose parts are found, they
should be retightened immediately.
3
Warranty
1 YEAR WARRANTY FOR FRAME AND FABRIC
Limited warranty is applicable on parts only. Warranty extends solely to the original
purchaser who must offer original sales receipt for record.
WHAT IS COVERED
Limited warranty is applicable on parts only. We warranty to the original purchase for
one year limited from the date of purchase that the frame, fabric, speaker, audio controller
LED light and AC adapter will be free from manufacturing defects.
SERVICE CENTER
The purchaser must contact our customer service center directly if this product is
found to be defect in material or workmanship. The manufacturer, as its option, will
repair or replace the defectives parts.
Please contact us via 1-800-961-9838, 9AM-5PM, Pacific Time Zone, Monday-Friday,
or [email protected]
.
WHAT IS NOT COVERED
Product used for commercial, contract, or other non-residential purposes, or damage
due to acts of nature, vandalism, misuse, or improper assembly is not covered.
Corrosion or rusting of hardware is not covered. Warranty is to the original purchase
and is non-transferable. Any replacement of warranted items will be in the original style
and color, or a similar style and color if the original is unavailable or has been
discontinued.

Care and Maintenance
4
For cleaning, use a mild detergent solution and rinse with water. Do not use acetone
abrasive or others special detergents to clean and air dry only.
Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating
is scratched. This is a natural process. To minimize this condition, it is recommended
that care be taken when assembling and handling the product in order to prevent the
paint from being scratched.
SPECIAL CARE SHEET:
Do NOT use the AC adapter during precipitation or inclement weather.
Do NOT leave the AC adapter outside, place and store in dry place.
Keep the AC adapter away from babies and children.
In order to protect the LED lights, do NOT break the Acryl panel of
the post.
All lighting equipment is designed to prevent humidity and moisture,
please do not disassemble.
Please always keep the speaker cover on the right position, the speaker
is waterproof.
When NOT using period of time, please turn off the power switch and
unplug the AC adapter.
Please connect all cables securely before plugging in power cable into
power outlet.
All the parts are special design for this product only, changes or
modifications not approved by the party responsible for compliance could
void the user’s authority to operate the equipment. The manufacture will
not be held liable for any direct, indirect, incidental or consequential
damages.

5
Pre-Assembly
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly.
Tools required for assembly (not included): Allen wrench (included), a screwdriver,
stepladder (min. 5ft.) and other safety items such as gloves, safety eyewear, and hardhat.
To avoid injury from exposed sharp edges, it may be necessary to use the above safety
equipment.
Do not leave it unattended if not fully assembled even if bolted to the ground.
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
Part Description Size QTY.
AA
BB
CC
DD
BOLT
BOLT
BOLT
( )
6 x 15mm
( )
6 x 25mm
( )
6 x 35mm
111
26
8
27
EE
FF
BOLT NUT
4
20
AA
BB CC DD
FF
EE GG
HH II JJ KK
LL
GG
HH
II
JJ
BOLT
BOLT
BOLT
BOLT
BOLT
( )
6 x 45mm
( )
6 x 48mm
( )
6 x 55mm
( )
6 x 58mm
( )
6 x 65mm
4
8
15
15
KK 1
SPANNER
LL 1
ALLEN WRENCH
CAP
MM
WASHER
MM 10

6
Pre-Assembly (continued)
Package Contents

7
Pre-Assembly (continued)
Package Contents

Pre-Assembly (continued)
Package Contents
8
IllustrationItem Description Qty.
Post (with power switch, lights,
speaker preassembled)
Post (with lights, speaker preassembled)
Back Panel
Back Panel
Side Panel
Side Panel
Side Panel
Front Panel
Front Panel
Fixed Tube
Fixed Tube
Fixed Tube
Shelf
Shelf
Shelf
Shelf
Shelf

9
Pre-Assembly (continued)
Package Contents
IllustrationItem Description Qty.
Support Piece
Support Piece
Support Piece
Table Top
Table Top
Table Top
Roof Post
Roof Post
Crossbar
Crossbar
Crossbar Connector
Roof Side Panel
Roof Side Panel
Roof Support Bar
Roof Support Bar
Roof Support Bar
Roof Support Bar

10
Pre-Assembly (continued)
Package Contents
Illustration
Description Qty.
Item
Upper Crossbeam Tube
Upper Crossbeam Tube
Upper Crossbeam Cover
Upper Crossbeam Cover
Roof Tube
Roof Tube
Roof Tube
Roof Panel
Corner Connector
Corner Connector
Center Connector
Rubber Washer
AC Adapter
Seat
Chair Leg
Support Bar
Connect Cable

Assembly Instructions
11
1. Secure Side Panel (E) in between Post (A) and Back Panel (C) by M6 x 25 (BB).
Fully tighten once all bolts in position.
A x 1
C x 1
E x 1
BB x 4

Assembly Instructions
12
2. Secure Side Panel (E) in between Post (B) and Back Panel (D) by M6 x 25 (BB).
Fully tighten once all bolts in position.
B x 1
BB x 4
D x 1
E x 1

Assembly Instructions
3-1. Insert Crossbeam Connector (AC) into Crossbeam (Z), connect wires and insert wires
into Crossbeam (Z). Please connect wires softly and slowly.
3-2. Insert Crossbeam (Z, AB) into Crossbeam Connector (AC) and secure by M6 x 15 (AA).
Fully tighten once all bolts in position.
13
AC x1
Z x 1
AB x 1
AA x 4

Assembly Instructions
14
4. Secure Roof Support Bar (AH, AI) by M6 X 48 (EE) with Nut (II) then cover with Cap (JJ).
AF x 2
AG x 2
EE x 2 JJ x 2
II x 2
II
JJ
II
JJ

Assembly Instructions
15
5. Secure Roof Support Bar (AH, AI) by M6 X 48 (EE) with Nut (II) then cover with Cap (JJ).
AH x 2
AI x 2
EE x 2 JJ x 2
II x 2
II
II
JJ
JJ

Assembly Instructions
16
6. Secure Upper Crossbeam Tube (AJ, AK) by M6 x 15 (AA).
Fully tighten once all bolts in positon.
AJ x 1
AA x 2
AK x 1

Assembly Instructions
17
7. Secure Side Panel (F) and Post (A) by M6 x 25 (BB). Secure Side Panel (G) and Post (B)
by M6 x 25 (BB). Fully tighten once all bolts in position.
F x 1 G x 1
BB x 4

Assembly Instructions
18
8-1. Secure Front Panel (H, I) by M6 x 35 (CC) with Nut (II) then cover by Cap (JJ).
Fully tighten once all bolts in position.
8-2. Secure Front Panel (I) and Side Panel (G) by M6 x 25 (BB) then secure Front Panel
(H) and Side Panel (F) by M6 x 25 (BB). Fully tighten once all bolts in position.
BB x 4
H x 1 I x 1
CC x 2
JJ x 2
II x 2
II
JJ

Assembly Instructions
9-1. Secure Fixed Tube (J, K) with Back Panel (C, D) by M6 x 15 (AA). Secure Fixed
Tube (J, K) with Side Panel (F, G) by M6 x 15 (AA). Fully tighten once all bolts in position.
9-2. Secure Fixed Tube (L) in between Side Panel (F, G) by M6 x 15 (AA).
19
AA x 6
J x 1
L x 1
K x 1

Assembly Instructions
20
10-1. Secure Shelf (N) on Back Panel (D) and Side Panel (E) by M6 x 15 (AA).
Fully tighten once all bolts in position.
10-2. Secure Shelf (M) on the Back Panel (C) and Side Panel (E) by M6 x 15 (AA).
Fully tighten once all bolts in position.
AA x 6
M x 1
N x 1