Tylko 156587 User manual

TYLKO SHELF MANUAL
shelf id: 156587
Melony Bedford
grid
Dusty Pink

2
2×
Assembly Tips - read before you start!
Find a partner. Prepare the space. Start assembling.
Assembling this shelf takes two. The shelf has to be assembled on the floor right by
the wall where it will stand. Secure the floor with
cardboard, a rug or any other protective surface.
The shelf has to be assembled face down, so please
pay attention to the stickers that mark the front of
each element. Start assembling from the lowest row.
The distance from the base to the wall should rough-
ly equal the depth of the shelf.

3
Assembly Tips - read before you start!
Slide parts into each other. Lift it up. Fix it to the wall.
Your shelf must
be fixed to a wall
to prevent serious
injury or damage
that may result
from tipping.
Use the provided wall fasteners. You'll also need a
plug suitable for your walls that you can get at
your local hardware dealer.
Once all parts are secured in place, raise the shelf
from the floor.
If it gets hard, use a hammer and ease the blow
with the board provided.

h1
v1 v2 v3
*
h1
v1
v2
v3
x 1 | package #2
x 1 | package #1
x 1 | package #1
x 1 | package #1
01
*Tip: dont assemble your shelf directly on the floor!
Avoid scratches by placing the Tylko cardboard,
a protective mat or a rug underneath it.
the parts you need:
4
2 3

h2
h2 x 1 | package #2
02
the parts you need:
5
2 3

w1 w2
w1
w2
x 1 | package #3
x 1 | package #3
03
the parts you need:
6
TOP
TOP
2 3 4 5
click
click

v4 v5 v6
v4
v5
v6
x 1 | package #4
x 1 | package #4
x 1 | package #4
04
the parts you need:
7
2 3

h3
h3 x 1 | package #2
05
the parts you need:
8
2 3

s1
s2
s1
s2
x 1 | package #4
x 1 | package #4
06
the parts you need:
9
1 2

v7 v8 v9
v7
v8
v9
x 1 | package #1
x 1 | package #1
x 1 | package #1
07
the parts you need:
10
2 3

h4
h4 x 1 | package #5
08
the parts you need:
11
2 3

w3 w4
w3
w4
x 1 | package #3
x 1 | package #3
09
the parts you need:
12
TOP
TOP
2 3 4 5
click
click

v10 v11 v12
v10
v11
v12
x 1 | package #4
x 1 | package #4
x 1 | package #4
10
the parts you need:
13
2 3

h5
h5 x 1 | package #5
11
the parts you need:
14
2 3

s3
s4
s3
s4
x 1 | package #4
x 1 | package #4
12
the parts you need:
15
1 2

v13 v14 v15
v13
v14
v15
x 1 | package #4
x 1 | package #4
x 1 | package #4
13
the parts you need:
16
2 3

h6
h6 x 1 | package #5
14
the parts you need:
17
2 3

s5
s6
s5
s6
x 1 | package #4
x 1 | package #4
15
the parts you need:
18
1 2

Raising the shelf from the floorRaising the shelf from the floor
19
For your safety,
we recommend lifting the shelf
by the vertical elements
as close to the middle as possible.

f1 f2
Adding doors
f1
f2
package #3
package #3
20
click