Tylko 166286 User manual

TYLKO SHELF MANUAL
shelf id: 166286
Tessa van den Broek
grid
Dusty Pink

2
2×
Assembly Tips - read before you start!
Find a partner. Prepare the space. Start assembling.
Assembling this shelf takes two. The shelf has to be assembled on the floor right by
the wall where it will stand. Secure the floor with
cardboard, a rug or any other protective surface.
The shelf has to be assembled face down, so please
pay attention to the stickers that mark the front of
each element. Start assembling from the lowest row.
The distance from the base to the wall should rough-
ly equal the depth of the shelf.

3
Assembly Tips - read before you start!
Slide parts into each other. Lift it up. Fix it to the wall.
Your shelf must
be fixed to a wall
to prevent serious
injury or damage
that may result
from tipping.
Use the provided wall fasteners. You'll also need a
plug suitable for your walls that you can get at
your local hardware dealer.
Once all parts are secured in place, raise the shelf
from the floor.
If it gets hard, use a hammer and ease the blow
with the board provided.

Part 1
#1
#2
#3
4

h1
v1 v2 *
h1
v1
v2
x 1 | package #2
x 1 | package #1
x 1 | package #1
Part 1 | 01
*Tip: dont assemble your shelf directly on the floor!
Avoid scratches by placing the Tylko cardboard,
a protective mat or a rug underneath it.
the parts you need:
5
2 3