Tylko 169989 User manual

TYLKO SHELF MANUAL
shelf id: 169989
piero beghetto
grid
Dusty Pink

2
2×
Assembly Tips - read before you start!
Find a partner. Prepare the space. Start assembling.
Assembling this shelf takes two. The shelf has to be assembled on the floor right by
the wall where it will stand. Secure the floor with
cardboard, a rug or any other protective surface.
The shelf has to be assembled face down, so please
pay attention to the stickers that mark the front of
each element. Start assembling from the lowest row.
The distance from the base to the wall should rough-
ly equal the depth of the shelf.

3
Assembly Tips - read before you start!
Slide parts into each other. Lift it up. Fix it to the wall.
Your shelf must
be fixed to a wall
to prevent serious
injury or damage
that may result
from tipping.
Use the provided wall fasteners. You'll also need a
plug suitable for your walls that you can get at
your local hardware dealer.
Once all parts are secured in place, raise the shelf
from the floor.
If it gets hard, use a hammer and ease the blow
with the board provided.

h1
v1
v2
v3
*
h1
v1
v2
v3
x 1 | package #2
x 1 | package #3
x 1 | package #3
x 1 | package #3
01
*Tip: dont assemble your shelf directly on the floor!
Avoid scratches by placing the Tylko cardboard,
a protective mat or a rug underneath it.
the parts you need:
4
2 3

h2
h2 x 1 | package #2
02
the parts you need:
5
2 3

w1
w2
w1
w2
x 1 | package #4
x 1 | package #4
03
the parts you need:
6
2 3
klick
klick

v4
v5
v6
v4
v5
v6
x 1 | package #3
x 1 | package #3
x 1 | package #3
04
the parts you need:
7
2 3

h3
h3 x 1 | package #2
05
the parts you need:
8
2 3

w3
w4
w3
w4
x 1 | package #4
x 1 | package #4
06
the parts you need:
9
2 3
klick
klick

v7
v8
v9
v7
v8
v9
x 1 | package #1
x 1 | package #1
x 1 | package #1
07
the parts you need:
10
2 3

h4
h4 x 1 | package #5
08
the parts you need:
11
2 3

w5
w6
w5
w6
x 1 | package #4
x 1 | package #4
09
the parts you need:
12
2 3
klick
klick

v10
v11
v12
v10
v11
v12
x 1 | package #1
x 1 | package #1
x 1 | package #1
10
the parts you need:
13
2 3

h5
h5 x 1 | package #5
11
the parts you need:
14
2 3

w7
w8
w7
w8
x 1 | package #4
x 1 | package #4
12
the parts you need:
15
2 3
klick
klick

Raising the shelf from the floorRaising the shelf from the floor
16
For your safety,
we recommend lifting the shelf
by the vertical elements
as close to the middle as possible.

f1 f2 f3 f4
Adding doors
f1
f2
f3
f4
package #4
package #4
package #4
package #4
17
click

18
Extension to your arm
Door a bit crooked? Here’s how to adjust its position.
When it is necessary to disas-
semble the component.
Adjusting hinges Video tutorial
Scan the QR code and see how to
adjust the position of the door.
QR-Codes not your thing? Go directly
to tylko.com/x/hinge-help.
PH2

19
d -
d-2
Drawer assembly on an example of the drawer 1 (d1)
Page 1/2
d -3
d-2
d-4
4 5
2
3

20
d1-5
7
Drawer assembly on an example of the drawer 1 (d1)
Page 2/2
6
d1-5
9
d1-5
8
Ta-da!
You’ve made it!
click
click
click