Ubiquiti UVC-G3-PRO User manual

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
1/15
Camera Tightening Tool Screw Anchors (Qty. 2)
Self-Tapping Screws (Qty. 2) Pole Mount Bracket Machine Screws (Qty. 2)
Package Contents
Installation Requirements
Pole-mounting: Two metal straps / hose clamps (not included)
Shielded Category 5 (or above) cabling with drain wire should be used for all
outdoor wired Ethernet connections and should be grounded through the AC
ground of the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade, shielded
Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend
that you use two Ethernet Surge Protectors, model ETH-SP, one near the
camera and the other at the entry point to the building. The ETH-SP will absorb
power surges and safely discharge them into the ground.
Hardware Overview
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
2/15
Ethernet Port
Reset Button
10/100 RJ45 port connects to an 802.3af/802.3at or 24V Passive PoE switch
for PoE power and data.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the camera is powered on.
Hardware Installation
Wall/Ceiling Mount
1.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
3/15
2.
3.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
4/15
4.
5.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
5/15
Or
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
6/15
6.
7.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
7/15
8.
9.
10. Proceed to the Connecting Power section.
Pole Mount
1.
2.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
8/15
3.
4.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
9/15
5.
Connecting Power
The UVC G3 Pro supports 802.3af, 802.3at, and 24V Passive PoE and can be
powered by any 802.3af/802.3at or 24V Passive PoE compliant switch, such as a
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
10/15
UniFi PoE Switch.
Connect the Ethernet cable from the camera directly to a PoE port on the switch.
Setting Up UniFi Protect via App
Download and install the UniFi Protect Mobile App to configure the UVC-G3-PRO.
Launch the UniFi Protect Mobile App and follow the on-screen instructions to
complete setup.
Adjusting the Camera View
1.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
11/15
2.
3.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
12/15
4.
5.
Specifications
UVC-G3-PRO
Dimensions
(Without Mounting Plate)
Ø 86 x 153 mm (Ø 3.39 x 6.02")
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
13/15
UVC-G3-PRO
Weight
(Without Mounting Plate)
700 g (1.54 lb)
Enclosure UV Stabilized Polycarbonate and Die-Cast
Aluminum
Networking Interface (1) 10/100 Ethernet Port
Sensor Sony IMX290, 1/2.8"
Lens 3-9 mm, f/1.2-f/2.1 Powered Zoom Lens
Field of View
Wide 108° (H), 58° (V), 125° (D)
Tele 37° (H), 20° (V), 43° (D)
Night Mode IR LEDs with Mechanical IR Cut Filter
Video Compression H.264
Resolution 1080p Full HD (1920 x 1080)
Maximum Frame Rate 30 FPS
Image Settings Flip, Brightness, Contrast, WDR, Hue, Infrared,
Sharpness, Saturation, Denoise, 50/60 Hz Flicker
Reduction
Management Interface
Managed Mode UniFi Protect
Standalone Mode Camera Integrated Web UI
Microphone Yes
Max. Power Consumption 12.5W
Power Method IEEE 802.3af/at Type 2 PoE or 24V Passive PoE
Power Supply 802.3af/802.3at or 24V Passive
PoE Switch
Buttons Factory Reset Button
Mounting Wall/Ceiling (Kits Included)
Pole (Bracket Included)
Operating Temperature -20 to 50° C
-4 to 122° F
Operating Humidity 0 to 90% Noncondensing
Weatherproofing IP67
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
14/15
WARNING: Hot surface. Do not touch.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be
provided only by a qualified service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis,
and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operations of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
Australia and New Zealand
UVC-G3-PRO Quick Start Guide

2022/09/01 23:27
UVC-G3-PRO Quick Start Guide
https://dl.ui.com/qsg/UVC-G3-PRO/UVC-G3-PRO_EN.html
15/15
Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
CE Marking
CE marking on this product represents the product is in compliance with all directives that
are applicable to it.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
© 2022 Ubiquiti Inc. All rights reserved.
UVC-G3-PRO Quick Start Guide