the device’s user guide for further instruction.
Pairing Method:
1. Turn off the headset.
2. Turn on the headset WHILE holding the ‘Talk’ button.
3. While ‘Pairing’ message appears on the LCD screen, release the ‘Talk’ button.
-> The standby sound emitted once every 5 seconds indicates that the headset
is now in Pairing Mode.
※ The pairing must be completed within 60 seconds. After that, the pairing
mode will be terminated and you must repeat from step 1.
4. Use the phone/MP3 player to search for Bluetooth devices. (Please consult your
phone/MP3 player’s user manual.)
5. Select “Lubix Stereo Headset” among the discovered Bluetooth devices.
6. When prompted for password, enter 0000.
7. ‘Connected’ message will appear on the LCD screen if pairing has been
successful.
※ If ‘FailedConn.’ message appears, try again from step 1.
Using the Headset to Make Calls
Make Call
1. Make a new call:
enter the desired phone number on your phone, and press
‘Talk’ button on your headset to start a new call.
2. Redial last number: When the ‘Talk’ button is pressed, the last dialed number
will appear on your phone. Pressing the ‘Talk’ button again will connect you to
that number.
3. Voice dial: Pressing and holding the ‘Talk’ button will launch the voice dialing
service.
※ In order to use the voice dialing service, your phone must support
HandsFree profile. Please consult your phone manual for further information.
Answer Call
1. When you receive a call, you will hear a ring tone on your headset, and the
caller’s number will appear on the LCD screen
2. Press any button on your headset to answer the call.
End Call
Push the ‘End Talk’ button to end the call.
If the person you are talking to hang up first, the call will be automatically
terminated.
Refuse Call
When receiving a call, push the ‘End Talk’ button to refuse the call. -> ‘Reject’
message will appear on LCD screen.
※ In order to use this function, your phone must support the ‘Hands free’ profile.
Transfer Call from Phone to Headset
1. To transfer a call from the phone to the headset, press the ‘Talk’ key -> ‘To
H.set’ message will appear on LCD screen.
2. Pressing the ‘Talk’ button again will transfer the call from the headset to the
phone. -> ‘To Phone’ message will appear on LCD screen.
Volume Level
While talking or listening to music, use ‘+’ / ‘-’ buttons to adjust the volume level.
-> Volume level is indicated by numbers between 0 and 15.
Using the Headset to Listen to Music
Play/Pause
1. Check to make sure that your headset and your Bluetooth device are paired. If
not, you must pair the devices first. (See our pairing section). If the devices are
paired, and the headset was the last device connected to your phone (or MP3
player), then pressing any button on the headset will connect your headset to
the counter Bluetooth device.
2. Launch the music player on your Bluetooth device.
3. Press ‘▶’ button on the headset to start listening to music.
-> ‘Play’ message will appear on LCD screen.
4. Use ‘▌▌’ button to pause and ‘▶’ button to resume play.
-> ‘Play/Pause’ message will appear on LCD screen.
Volume Level
While talking or listening to music, use ‘+’ / ‘-’ buttons to adjust the volume level.
-> Volume level is indicated by numbers between 0 and 15.
Song Selection
Use ‘|◀◀’ / ‘▶▶|’ buttons to backward/forward songs.
Answering Call While Listening to Music
1. When you receive a call, music will stop and you will hear a ring tone on your
