UBTECH Iron Man MK50 User manual

Legal GuideEnglishProduct Model: IM050
Iron Man MK50 Robot by UBTECH
Iron Man MK50 Robot by UBTECH Legal Guide: Open the Iron Man MK50
Robot by UBTECH App application or go to
https://ubtrobot.com/products/ironman. The explanations provided in this guide
are for information purposes only and may be modified. Not all devices are
compatible. Check https://ubtrobot.com/products/ironman on your smart
device’s browser for confirmation.
Safety and handling: Important safety instructions. Save these instructions.
DANGER: To reduce the risk of fire or electric shock carefully follow these
instructions. CAUTION: Risk of electric shock. Use in a dry location only. To
avoid injury or harm please read all safety information and operating
instructions before you or your child use the Iron Man MK50 Robot by
UBTECH. To reduce the risk of damage or injury, do not attempt to open Iron
Man MK50 Robot by UBTECH. Do not attempt to service the Iron Man MK50
Robot by UBTECH yourself.
Batteries: Must plug in the users USB Adaptor to fully charge. The lithium
polymer batteries in the Iron Man MK50 Robot by UBTECH can be hazardous
if mishandled. Note that discarding the Iron Man MK50 Robot by UBTECH
batteries in your general waste can be harmful to the environment. For further
information on disposing of Iron Man MK50 Robot by UBTECH, contact your
local solid waste authority. CAUTION: Do not attempt to charge non-
rechargeable batteries with the provided power adapter. Attempting to charge a
non-rechargeable battery can cause an explosion and/or fire. CAUTION:
Battery is only to be charged by adults.
WARNING: To avoid damage or injury, charge only withthe supplied USB
charging cable. The USB power adapter is supplied by the consumer: The USB
power adaptor the consumer uses is a standard 5V 2 Amp USB adaptor with the
supplied cable.
UBTECH One Year Limited Warranty Summary: Iron Man MK50 Robot
by UBTECH product, as supplied and distributed by UBTECH, and delivered
new in the original carton to the original purchaser, is warranted by UBTECH
against manufacturing defects in materials and workmanship for a period of one

(1) year.
Regulatory: This device complies with CE, FCC, RSS, and ICES requirements.
See below for more details. CE COMPLIANCE STATEMENTThis product
complies with the requirements of European Directives. For more details on
compliance, visit to https://ubtrobot.com/products/ironman.
Hereby UBTECH ROBOTICS CORP. declares that the radio equipment type
IPSWSTS is in compliance with
Directive 2014/53/EU.The full text of the EU declaration is available at the
following internet address: to
https://ubtrobot.com/products/ironman.RADIO FREQUENCY BANDS AND
POWER:BT frequency band: 2402MHz to 2480MHzBT maximum
transmitting power: 0 dBm., 1 mW
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
FCC Compliance: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC ID: 2AHJX-IM050
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Shielded cables with core must be used with this unit to ensure compliance with

the Class B FCC limits.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to connect the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canada ICES-003
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that
may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.

Software: Your Iron Man MK50 Robot by UBTECH product can connect with
special UBTECH copyrighted software to control its operation. Additionally,
your Iron Man MK50 Robot by UBTECH product contains proprietary software
developed and copyrighted by UBTECH.
Support: You may contact UBTECH for support questions three different
ways: online at to https://ubtrobot.com/products/ironman, email at
ironman.service@ubtrobot.com or phone at +1-800- 276-6137 (M-F 9AM –
6PM PST). You can also call our international phone number at +1-408-846-
1329.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
Google Play is a trademark of Google Inc. © Marvel
© 2017 UBTECH ROBOTICS CORP. All Rights Reserved. UBTECH and the
UBTECH logo are trademarks of UBTECH ROBOTICS CORP. All other
trademarks and trade names are the property of their respective owners. For
more information, visit us at ubtrobot.com.
Importer:xxxxxxxx; Address;xxxxxxxxxxx;
Contact information (telephone number or website
address):xxxxxxxxxxxxxxxxx
Made in China.UBTECH ROBOTICS CORP.16th and 22nd Floor, Block C1,
Nanshan I Park, No .1001 Xueyuan Road, Nanshan District, Shenzhen City,
ChinaAge Grade 14+Do not use as a toy.
This manual suits for next models
1
Table of contents
Other UBTECH Toy manuals
Popular Toy manuals by other brands

PLANEPRINT
PLANEPRINT SHARD Assembling manual

dji
dji Matrice 600 Pro Disclaimer and safety guidelines

WARCRADLE SCENICS
WARCRADLE SCENICS Gloomburg Assembly guide

HobbyZone
HobbyZone Sportsman S Plus instruction manual

Melissa & Doug
Melissa & Doug 9383 Assembly instructions

Seagull Models
Seagull Models P-26A PEASHOOTER Assembly manual