UCView VIEW MEDIA 10 PLAYER User manual
UCView
Reaching Your Audience VIEW MEDIA 10 PLAYER
INSTALLATION MANUAL
1
Installing your VM 10 Player
Thank you for purchasing the UCView View Media 10 player. Please match the items on the list
below with the items in the box. If any item is missing or damaged, please contact your UCView
Media Networks sales representative immediately.
HDMI (High-Definition Multimedia Interface): A single cable which is capable of
transmitting high - definition video and high - resolution audio.
DVI (Digital Video Interface): A cable which is capable of providing digital video
signal.
VGA (Video Graphics Array): An analog cable which enables connection from your
computer to a monitor.
LAN/Ethernet: A LAN/Ethernet cable can connect to devices over a local area
network, such as PCs and routers.
• One (1) View Media 10 player
• One (1) Power supply
• One (1) Cable cord
• One (1) Antenna
1Remove packaging - make sure box and plastic casings are stored away in case a return is
necessary.
2Plug in the LAN/Ethernet cable into the VM 10 player.
3Plug in your video source, HDMI or VGA cable, into the VM 10 player and the monitor.
4Plug in the Power cable into the VM 10 player.
5Attach the antenna, which is included in your package, to your VM 10 player.
LAN/Ethernet HDMI VGA Power
6Once the appropriate cables are securely attached to both the VM 10 player and the monitor,
firmly press the power button, which is located in front of the VM 10 player.
7Select the correct video input source on your monitor. The Display Password will appear on the
screen.
Note: Image depicts the back portion of the VM 10 player. Please connect your cable to
the appropriate receptacle labeled below. Images are subject to change without notice.
1
1
2 3 4 56
Antenna 2USB port 3VGA 4HDMI 5LAN/Ethernet 6Power
2
Using your VM 10 Player
1Move over to your workstation to access your management tool.
2Locate the PC you will be using to monitor your digital signage network.
3Open up an Internet browser.
4Type in portal.ucview.com (or your server’s address) in the address bar.
5A login screen will appear.
5Once you press enter, the user interface displaying EZBoard, Campaigns & Ads, etc., will appear.
9Open up an Internet browser.
10 Type in portal.ucview.com (or your server’s address) in the address bar.
11 See user manual or video tutorials for more information.
UCView
Reaching Your Audience
18425 Napa St
Northridge, CA 91325
Tel: 1-818-772-8255
Toll Free: 1-877-828-4399
Fax: 1-818-772-7901
Email: [email protected]
Table of contents
