UfiSpace S9601-104BC Manual

Hardware Installation Guide
S9601-104BC
Open Aggregation Router
R1.1

S9601-104BC Hardware Installation Guide | i
Table of Contents
1Overview.............................................................................................................................1
2Preparation .........................................................................................................................2
Installation Tools......................................................................................................................2
Installation Environment Requirements..................................................................................3
Preparation Check List .............................................................................................................4
3Package Contents ................................................................................................................5
Accessory List........................................................................................................................... 5
Component Physical Information ............................................................................................6
4Identifying Your System.......................................................................................................7
S9601-104BC Overview ........................................................................................................... 7
PSU Overview........................................................................................................................... 7
Fan Overview ...........................................................................................................................8
Port Overview .......................................................................................................................... 9
5Rack Mounting ..................................................................................................................10
6Installing Fan Modules.......................................................................................................13
7Installing Power Supply Units ............................................................................................14
8Grounding the Router........................................................................................................16
9Connecting Power .............................................................................................................18
DC Version..............................................................................................................................18
AC Version.............................................................................................................................. 20
10 Verifying System Operation...............................................................................................22
Front Panel LED...................................................................................................................... 22
PSU FRU LED .......................................................................................................................... 23
Fan FRU LED ...........................................................................................................................23
11 Initial System Setup...........................................................................................................24
12 Cable Connections.............................................................................................................26
Connecting the USB Extender Cable...................................................................................... 26
Connecting a Cable to the ToD Interface...............................................................................26
Connecting the GNSS Interface .............................................................................................27
Connecting the 1PPS Interface ..............................................................................................27
Connecting the 10MHz Interface........................................................................................... 28
Connecting the Transceiver ................................................................................................... 28
13 Cautions and Regulatory Compliance Statements ..............................................................29
Cautions and Regulatory Compliances .................................................................................. 29

S9601-104BC Hardware Installation Guide | 1
1Overview
The UfiSpace S9601-104BC is a high-performance, versatile, open disaggregated aggregation
router. It is designed to address the changing needs of the next generation transport
network as Telecoms make the transition from legacy technologies towards 5G.
Providing 25GE, 100GE and 200GE services ports, the S9601-104BC platform can enable
multiple application architectures required for high traffic loading in a 5G mobile Ethernet
network. Due to its versatility, the S9601-104BC can be positioned in different parts of the
network to perform aggregation, such as in the backhaul to aggregate BBU pooling or even
as a Broadband Network Gateway (BNG) within the central office.
With the hardware fully supporting IEEE 1588v2 and SyncE synchronization, 1+1 redundancy hot-
swappable components, and a high port density design, the S9601-104BC delivers high system
reliability, Ethernet switching performance and intelligence to the network that helps reduce
infrastructure and administrative costs.
This document describes the hardware installation process for S9601-104BC.

S9601-104BC Hardware Installation Guide | 2
2Preparation
Installation Tools
Phillips #2 Screw Driver
6-AWG green-and-yellow wire for grounding
8-AWG DC power wire
Crimping tool
Wire stripping tool
All illustrations within this document are for reference purposes only. Actual
objects may differ.
•PC with terminal emulation software. Refer to the "Initial System Setup" section for
details.
•Baud rate: 115200 bps
•Data bits: 8
•Parity: None
•Stop bits: 1
•Flow control: None

S9601-104BC Hardware Installation Guide | 3
Installation Environment Requirements
•Power Reserve: The S9601-104BC power supply is available with:
1. DC Version: 1+1 Redundant and hot swappable -40 to -72V DC power supply field
replaceable unit or;
2. AC Version: 1+1 Redundant and hot swappable 100 to 240V AC power supply field
replaceable unit.
To ensure the redundant feed power design functions properly, a field with dual power
circuit is recommend with a reserve of at least 1300 watts on each power circuit.
•Space Clearance: The S9601-104BC width is 17.16 inches (43.6cm) and shipped with a rack
mount brackets suitable for 19 inch (48.3cm) wide racks. The depth of the S9601-104BC
chassis is 17.32 inches (44.0cm) without the field replaceable units (FRUs) and comes with
adjustable check mounting rails suitable for rack depths of 22 inches (55.88cm) to 33 inches
(83.82cm). The handle for the fan units will extend outwards by 1.15 inch (2.9cm) and the
handle for the power supplies will extend outwards by 1.19 inches (3cm). Therefore, to
accommodate the fan and power supply handles, a minimum space clearance of 6 inches
(15.2cm) is needed at the back of the S9601-104BC. A total minimum reserve depth of 24
inches (60.96cm) is required.
Figure 1.
• Cooling: The S9601-104BC airflow direction is front-to-back. Make sure the equipment
on the same rack have the same airflow direction.
Figure 2.

S9601-104BC Hardware Installation Guide | 4
Figure 3.
Preparation Check List
Task
Check
Date
Power voltage and electric current requirements
DC version: -40 to -72V DC, 42A maximum x2 or;
AC version: 100 to 240V AC, 15A maximum x2
Installation space requirements
S9601-104BC requires 2RU (3.45”/8.8cm) in height, 19” (48.3cm) in
width, and need a minimum reserve depth of 24 inches (60.96cm)
Thermal requirements
S9601-104BC working temperature is 0 to 50°C (32°F to 122°F),
airflow direction is front-to-back
Installation tools required
#2 Philips Screwdriver, 6-AWG yellow-and-green wire stripper, and
crimping tool
Accessories required
6AWG Ground wire, 8AWG DC power wire, PC with USB ports and
terminal emulation software

S9601-104BC Hardware Installation Guide | 5
3Package Contents
Accessory List
Item Description Spec. & Dimensions Qty. Weight
1 Grounding Lug
1x Grounding Lug (#6 AWG)
1.97” x 0.44” x 0.3”
(50 x 11.1 x 7.5mm)
1 set 0.022lb (10g)/1 set
2 Screw Kit
(for Grounding lug)
2 x Screw M4*L8.0mm
4 x M4 Lock Washers 1 set 0.007lb (3.5g)/1 set
3 Grounding Lug
(DC Only)
4 x Grounding Lugs (#8 AWG)
1.97” x 0.44” x 0.3”
(50 x 11.1 x 7.5mm)
1 set 0.03lb (40g)/1 set
4 Micro USB Cable 3.28’ (1000mm) 1 pcs 0.05lb (25.5g)/1 pcs
5 RJ45 to DB9 Female
Cable 8’ (2438mm) 1 pcs 0.23lb (105g)/1 pcs
6 Sliding Rail (for 4
post)
30.4” x 1.7” x 0.9”
(771 x 44 x 22)
(22” ~ 33” rack depth)
2 set 7lb (3.178kg)/2 set
3.5lb (1.589kg)/1 set
7 Rail Screw (for
sliding rail 2 x Screw M4.0*L5.5 1 set 0.004lb (1.9g)/1 set
8 Adjustable Mounting
Rail (for 4 post)
16.02”
x 1.69” x 0.83”
(406.8 x 43 x 21mm)
(22” ~33” rack depth)
2 sets1.38lb (630g)/2 sets
0.69lb (315g)/1 set
9
Screw Kit (for
Adjustable mounting
Rail)
8 x Screw M4.0*L6.5 1 set 0.02lb (7g)/1 set
10 Rack Mount Bracket
3.54” x 0.85” x 3.42”
(90 x 21.5 x 86.9mm)
2 pcs
0.73lb (332g)/2 pcs
0.36lb (166g)/1 pcs
11 Screw Kit (for Rack
Mount Bracket) 8 x Screw M4.0*L6.5 1 set 0.02lb (7g)/1 set
12 AC Power Cord
(AC version only) 72.05” (1830mm) 2 pcs 1.43lb (650g)/ 2 pcs
0.71lb (325g)/1 pcs
13 USB 3.0 Cable 7.87” (200mm) 1 set 0.037lb (17.2g)/1 pcs
14 SMB to BNC
Converter Cable 300mm 2 set 0.039lb (18g)/1 set

S9601-104BC Hardware Installation Guide | 6
Component Physical Information
Specification Item Description
Weight
Total package contents 66.16lb (30.01kg)
Chassis without FRU 33.49lb (15.19kg)
Power Supply Unit (PSU) DC PSU: 2.2lb (1.0kg)
AC PSU: 2.6lb (1.2kg)
Fan module 1.1lb (498g)
Ground lug 0.03lb (15.3g)
Sliding rail 3.5lb (1.589kg)
Micro USB cable 0.05lb (25.5g)
RJ45 to DB9 female cable 0.23lb (105g)
AC power cord (AC version only) 0.77lb (350g)
Dimension
S9601-104BC (W x D x H) 17.16” x 17.32” x 3.45” (436 x 440 x 87.7mm)
PSU (W x D x H) 2.89” x 7.28” x 1.57” (73.5 x 185 x 40mm)
Fan (W x D x H) 3.2” x 4.8” x 3.19” (81 x 113 x 81.5mm)

S9601-104BC Hardware Installation Guide | 7
4Identifying Your System
S9601-104BC Overview
Figure 4.
PSU Overview
Power supply unit (PSU) with 1+1 Redundancy. Hot swappable, field replaceable unit (FRU).
AC Version:
Figure 5.

S9601-104BC Hardware Installation Guide | 8
DC Version:
Figure 6.
Fan Overview
3+1 Redundant, hot swappable, field replaceable unit (FRU).
Figure 7.