UK Beauty Machines HF007 User manual

UK Beauty Machine tattoo & hair removal laser
1
Emsculpt machine HF007
user's manual

UK Beauty Machine tattoo & hair removal laser
2
Chapter 1: Warning
1.1 respected user:
Thank you for choosing the instrument carefully designed by our company. In
order to better exert the effect of the product, we sincerely recommend:
1) Before using the instrument, please read this applicable manual carefully and
keep it in a safe place for future reference and inquiries;
2) Please install, use and operate correctly in accordance with the requirements
in the manual;
3) Do not disassemble or modify any parts of this level;
4) Unless authorized by authorized personnel of our company, it is strictly
forbidden to open the cover and disassemble the host.
5) It is strictly forbidden for non-professionals to carry out maintenance and
transformation without authorization;
6) If you encounter any problems during the operation, please take videos and
pictures and contact the seller in time;
2.2 Safety precautions
1、When the power plug is dirty, wipe it clean in time, and make sure that there
are no foreign objects before connecting to the socket.
2、Connecting to the 110V, 60HZ/220-230V, 50Hz three-plug high-power power
socket, and the power cord must be unplugged when moving the device.
3、Don't touch the power plug and pull the power cord after plugging in.
4、Don’t touch the power cord and plug with wet hands.
5、Don’t force the instrument or the parts around the power supply.
6、Don’t use the instrument at high temperatures, and do not place heating
equipment near the instrument.
7、After the instrument is started, do not open the power socket of the
instrument at will, which will cause failure.
8、If there is smoke or odor when using the instrument, please unplug the power
supply and consult after-sales service.
9、Don’t touch the lips and eyes when the handle is activated to avoid injury.
1.3 Operation precautions

UK Beauty Machine tattoo & hair removal laser
3
1、Please read the manual carefully, and then use it according to the method in
the manual. When the instrument is not used for a long time, please unplug the
power supply.
2、The instrument must be used after consulting with experts or after
professional training.
3、When using hand tools, first turn down the intensity, and then gradually
adjust to the applicable intensity.
4、When the handle is not in use, it should be placed in the accessory rack to
prevent it from falling; when the handle is in the accessory rack, do not pull the
connecting line forcefully.
5、After using it each time, you need to stand by for ten minutes before turning
off the power.If you need to change the operator, please use it after 5 minutes. For
the same manipulator, you need to wait for 5 minutes before using it again.
6、If there is any abnormality on the patient when using the instrument, please
stop the operation immediately and consult an expert.
7、If the instrument is abnormal, please confirm the manual again before
operation; if the abnormality is not removed, do not disassemble the instrument
by yourself, and contact after-sales service for consultation.

UK Beauty Machine tattoo & hair removal laser
4
Chapter 2: Installation
Product acessories:
After the instrument is opened, check whether the accessories are complete
according to the instrument configuration list. If you have any problems, please
contact the seller.
Small handle*2 Body handle*2
Small handle for arm and leg
Handle bracket
Large handle for body
12.1 inch screen
Plug on back

UK Beauty Machine tattoo & hair removal laser
5

UK Beauty Machine tattoo & hair removal laser
6
Chapter 3: Operation taboos
The handle can’t face your head
1) Patients with heart disease, cardiac pacemaker, and hypertension which
implant metal or electronic equipment (pacemaker, defibrillator, neurostimulator,
drug pump, etc.).;
2) Acute inflammation, deep vein thrombosis. Patients with goiter, asthma, cancer,
etc.;
3) People with ruptured blood vessels, wounds, and bleeding wounds;
4) Areas with artificial fillers in the body that have undergone cosmetic surgery;
5) People with metal materials in their bodies;
6) Those with immune system dysfunction;
7) Those with skin inflammation and body swelling;
8) People who feel numb and do not respond to heat
9) It’s forbidden for pregnant women, breastfeeding women, and menstruating
women.
10) Those who are close to menstruation should be cautious, which may cause
early menstruation or abdominal cramps.
11) It’s forbidden for those with major diseases such as malignant tumors and
cancer.
12) It’s forbidden for those with heart disease, arrhythmia, epilepsy, severe
hypertension, and diabetes.
13) It’s forbidden for those with major surgery patients, and it can also be used

UK Beauty Machine tattoo & hair removal laser
7
according to the recovery situation and after consulting the doctor.
14) If there is a wound on the skin, avoid the wound or don’t do it.
15) Do not operate the abdomen when you are full, at least one hour after meals;
16) Trying avoid ribs when using.
17)Before use, the metal objects worn on the body must be removed. When using,
avoid the metal objects on the clothes.

UK Beauty Machine tattoo & hair removal laser
8
Chapter 4 :Interface and operation process
1. Boot interface
2. Gender selection interface
3. Part selection interface

UK Beauty Machine tattoo & hair removal laser
9
4. Treatment interface

UK Beauty Machine tattoo & hair removal laser
10
5. Operation guidance：
Guide：
1) M1/M2/M3 are folders, used to store the parameters, which can be
used directly next time, so select M1/M2/M2 first, then adjust treatment
parameters;
2) F1/F2/F3 is the handle work frequency, parameter range is "05-50", select
F1/F2/F3，then adjust ，increase or reduce；(It must be ensured that the
number of F1/ F3 is lower than F2, the interval working time of F1/F2/F3 is 9
minutes, and F1/F2/F3 work alternately within the set time);
Adjust F1, F2, F3
F1,F2,F3 work frequency
Tesla strength
Adjust and time
Work time
M1, M2,M3: folder
Store parameters

UK Beauty Machine tattoo & hair removal laser
11
3)“ ”is the Tesla strength, the parameter range is "10-100", select ,then
adjust the right ，increase or reduce；（suggest to set a low intensity first,
and then increase the intensity according to the customer’s feelings）；
4) is the treatment time (machine working time), the time adjustment
range is "1-90 minutes"，first select ，then adjust ，increase or reduce；
5) F1/F2/F3 control the work frequency of the large handle and the small handle,
but (Tesla) and time are controlled separately;
6)so after adjust big handle,then adjust small handle Tesla and time;
7) after adjust parameter, click ,parameters will be stored in the
folder(M1/M2/M3)
8) is the selection button of the handle, blue represents the
selected handle, and gray represents the unselected handle：
No select large handle
Select large handle
Return/preparation/work

UK Beauty Machine tattoo & hair removal laser
12
So the working mode: ①Only 2 large handles work; ②Only 2 small handles work
③4 handles work together;
9) Tie the handle to the treatment site with a strap in
advance, first click ，then click , handles starts to work(The machine
will make the treatment by automatically , you need to adjust the “Tesla”
intensity at any time according to the customer’s feelings);
10) Click , the parameters will be restored to factory settings, it is
recommended not to touch it;
6. Interface description
1 is frequency plus;
2 is frequency reduction;
3 is high and low frequency selection (F1 low frequency; F2 high frequency,
F3 low frequency.);

UK Beauty Machine tattoo & hair removal laser
13
4, 5, 6, 7 are handle recognition, temperature and selection of working handle;
8 is the first set of handle energy adjustment;
9 is the adjustment of the working time of the first group of handles;
10 is the first group of energy time plus;
11 is the first group of energy time reduction;
12 is the return key (used to return when the operation is completed or for the
operation);
13 is the preparation key;
14 is the work pause button;
15 is the second group of handle energy keys;
16 is the second group of energy time plus;
17 is the second group of energy time reduction;
18 is the second group of working time keys;
21 is the smart mode save button; 20 is the smart mode reset button
19 is the smart mode setting area (you can set three groups of smart modes:
M1/M2/M3, first select any group of M1/M2/M3, adjust F1/F2/F3, adjust low
frequency and high frequency, select energy, adjust to Appropriate value, click 21
is the save button, after the next boot and enter the interface, you only need to
select the saved mode to prepare for work.)
This machine is mainly used to increase muscles (fat can also be consumed
during treatment)
Recommendations for treatment:
1) During treatment, fasten the handle with a band and stick to the treatment site;
2) Regarding F1/F2/F3 frequency, and Tsala (lightning sign), as long as the
customer can bear it, the higher the parameter, the better the treatment effect;
3) Different parts have different bearing capacity, so the parameters are different,
adjust according to the customer's feelings
4) After adjusting the parameters, click the save button (see the manual for
details)

UK Beauty Machine tattoo & hair removal laser
14
1. Stop button:
Generally, before transportation, we will press it and it will turn off, so after
connecting the power, first turn on the emergency stop (Rotate it to the right and
it will automatically pop up);
Let the client lie on the beauty bed and tie the handle to the treatment area with a
bandage;
Operating position
The position of the operation should be the same as that of the interface selection.
Fixing the handle with the strap along the treatment site, make sure that it’s fully
attached to the site and fixed in place, and then start the work.
2. recommend to adjust the intensity to 1-2(1-10 level), and then adjust level
according to the customer’s feelings
3. Power on: turn the key to the right:
The main screen starts the boot animation: customer’s logo, then click
Basic operation

UK Beauty Machine tattoo & hair removal laser
15
,Enter gender selection ，Enter the part selection
interface, and enter the main operation interface after selecting the part.
Select in turn: working handle；Select M1 or M2 or M3, it will directly switch
to the corresponding frequency and energy. If the default frequency and
energy are not satisfied by the customer, you can adjust F1/F2/F3 and energy
by yourself, and then click the save button No. 21,then click ready ；
Observe whether the heat dissipation of the selected working handle is
activated；after normal Click the work button ，start working，Stop
clicking temporarily .
After the operation is complete, click to stop, need to choose other
parts or gender selection
Course of treatment:
The duration of one operation is 30 minutes for one part, and the maximum is no
more than 60 minutes; 3 times a week, two weeks is a course of treatment. The
best effect is 2-4 weeks after treatment. According to the course of treatment (4-6
courses), the treatment can last for 6 months.
Suggested parameter list（you can adjust according to customer’s feeling）
Man

UK Beauty Machine tattoo & hair removal laser
16
Parameter
Body parts
F1
05-50
F2
05-50
F3
05-50
Tesla strength
10-100
Time
1-90 mins
Arm
8
25
10
25-50
30
Leg(thigh calf)
10
30
15
25-50
30
Abdomen
5
20
6
20-50
30-45
Buttocks
15
35
18
60-80
30-50
Woman
Parameter
Body parts
F1
05-50
F2
05-50
F3
05-50
Tesla strength
10-100
Time
1-90 mins
Arm
5
23
6
20-45
30
Leg(thigh calf)
8
25
7
20-45
30
Abdomen
5
18
6
20-35
30-45
Buttocks
12
30
15
40-60
30-50
Chapter 5:Maintenance and repair
5.1 Maintenance
5.1.1Daily inspection
Managers must regularly inspect and control instruments and components.
Whether the power socket is reliably connected to the ground.
Before use,check whether the power cord of it is damaged,and stop using the
instrument if it is damaged.
5.1.2 Cleaning
Periodically cleaning the equipment to ensure the sanitation and good operation
of it. You can wipe the outside of the device with a damp cloth when it ’s
powered off, using soapy water or a neutral detergent.
5.1.3 Fuse replacement

UK Beauty Machine tattoo & hair removal laser
17
When replacing the fuse, in order to prevent electric shock, you must turn off the
power and unplug the power plug.
5.2 Repair
After purchasing the machine, you need to keep the warranty card and send it to
the manufacturer or agent to have the warranty effect From the date of purchase
(by receipt), the company’s product quality is guaranteed for one year free of
charge. （Warranty with the purchase receipt and warranty card ）After the
warranty period has expired, please contact the manufacturer directly to provide
professional after-sales service. To repair this machine, you must contact the
company’s business department or dealer, and do not repair it without
authorization. If you open the package without consent, the company may not
provide warranty.
5.3 Common troubleshooting method.
Failure phenomenon
Causes
Exclusion and resolution
Equipment not
working
The power plug is not inserted into the socket
check power
The power switch is not on
check the power switch
Failure of power fuse
replace the fuse
Handle not working
The working head has been damaged
replace working head
The interface on the back of it is not installed
correctly
re install

UK Beauty Machine tattoo & hair removal laser
18
Chapter 6: Storage and transportation management
Storage: The instrument should be stored in the original packaging box, placed in a
well-ventilated room, the packaging box should be high, the ambient temperature
is -10℃~40℃, the relative humidity is not more than 93%, and it is not allowed
to be placed in harmful gas. Surrounding flammable, explosive materials and
corrosive gases.
Transportation: The instrument in the packaged condition is suitable for road,
railway, aviation and waterway transportation. During loading and unloading and
transportation, it should be protected from severe vibration and shock, and
should not be exposed to moisture, and cannot be mixed with flammable and
corrosive substances. The specific requirements are as specified in the order
contract.
1）Emsculpt Beauty Machine
3）Model: HFOO7
4) Output power : 6000W
5)Screen: 12.1 ''
6)Tesla: 1-10 Tesla
7)Cooling system: air-cooled
8)Input power: 110V/220V 60HZ / 50HZ
9)Serial No. :SIL211013xxx
Technical parameter