Ultimate Drone Fishing Poseidon Pro User manual
POSEIDON PRO
PRE-FLIGHT CHECKLIST
ultimatedroneshing.com
VISIT OUR WEBSITE FOR MORE TIPS HOW TO’S AND Q&A
ULTIMATEDRONEFISHING.COM
This Quick Start and Pre-ight checklist does not take the place of the manual – failure to read and
understand the manual or watch the instructional videos could result in injury or catastrophic failure
of your drone.
CAUTION: Although this drone is waterproof it is not advisable to land it in water unless necessary to
do so – salt water will increase the maintenance of the drone and will reduce the life span of the drone.
NOTE: No drone is crash proof – the warranty does not cover any loss of a drone due to an accident
or collision. The propellers are made from carbon bre and do not ex, if the propeller has an accident
or hits an object – this can damage the motor – always endeavour to disarm the motors before, or as
soon as you can should an accident be unavoidable.
Warning: Do not touch the LCD screen on the Remote Controller or change any parameters
Never adjust any of the remote controller settings – The drone is shipped in the correct mode and
should the mode be changed it will need to be re calibrated – the display should read FLY MODE OFF.
APP Setup
NB: The IDFTECH App requires mobile or tablet with 5G connection
IOS version, search for IDFTECH in the Apple app store and click download
Android version, search for IDFTECH in the Google play store and click download
APP INSTALLATION
COPYRIGHT © 2020 UDF ENTERPRISES, PTY LTD
VISIT OUR WEBSITE FOR MORE TIPS HOW TO’S AND Q&A
ULTIMATEDRONEFISHING.COM
COPYRIGHT © 2020 UDF ENTERPRISES, PTY LTD
Connecting Poseidon Pro to the APP
Go to your mobile or tablets settings and select Wi-Fi – Poseidon Pro will be listed starting with V100-
______ and use Password 1234567890, once connected return to the IDFTECH App and open it.
Turn the remote controller on rst and then the drone – you will hear a connection tone once synced.
On successful syncing the drone camera will display the image on the APP screen.
Wait until at least 8-10 satellites have been found and then click on the Orange button to Sync the App
to the drone – ‘Check Successful’ should be displayed and the height and distance position should be set
and will display. If height and distance or pictures and video are not displaying, this is because you have
not calibrated the App to the drone – Push the orange button.
VISIT OUR WEBSITE FOR MORE TIPS HOW TO’S AND Q&A
ULTIMATEDRONEFISHING.COM
Prior to ight
Check you are legally allowed to y at the chosen location and ensure you conform to the
relevant drone laws of your country and state
Check the weather conditions – Ensure wind speeds do not exceed the drone’s parameters
Ensure the IDFTECH APP is up to date
Connect the drone battery and ENSURE the GPS LID ARROW is facing FORWARD to the Front
of the drone (Failure to do so will result in a catastrophic crash and could result in
personal injury)
Check the propellers are in good condition – are not chipped or cracked etc.
Calibrate Poseidon Pro’s compass as per directions - Always re-calibrate the drone if you have
moved locations.
Start up and Take o
Ensure all remote controller toggle switches are in their correct position – pushed forward
Turn on the remote controller rst
Turn on the drone after turning on the remote controller
Ensure successful pairing of the App to the drone and push the orange button to calibrate
the app to the drone.
Check the drone battery level indicator on the App and check the remote controller battery
level indicator on the Remote controller LCD display
Check the GPS signal and make sure that enough satellites have been located
Engage and start the drone motors
Hover the drone at no more than 10 metres for 10 seconds to ensure the drone is behaving
normally and responding correctly – if not, land the drone and re- calibrate the drone’s compass
PRE-FLIGHT CHECKLIST
COPYRIGHT © 2020 UDF ENTERPRISES, PTY LTD
VISIT OUR WEBSITE FOR MORE TIPS HOW TO’S AND Q&A
ULTIMATEDRONEFISHING.COM
After ight checks and maintenance
Even if you did not land the quadcopter in water, salty air and spray can cause corrosive
actions. After ight remove the propellers and submerge each motor momentarily in fresh
warm water. Thoroughly rinse the quadcopter o with fresh water and dry. Where possible,
clean the drone directly after use or within 2 hours. Spray the motors and electrical connections
with CorrosionX. Use OANNES Silicon Grease to nourish the GPS Lid membrane.
Remove the Quadcopter battery and place it in re- proof pouch or container and store in a cool
environment.
Carefully inspect all propellers, if a propeller is damaged (Even slightly damaged) - replace the
propeller immediately. Do not attempt to y the aircraft with a damaged propeller as this can
cause the aircrafts stability to deteriorate or become unmanageable, resulting in the potential
loss of the drone and/or causing personal injury.
PRE-FLIGHT CHECKLIST
COPYRIGHT © 2020 UDF ENTERPRISES, PTY LTD
Table of contents
Other Ultimate Drone Fishing Drone manuals
