ultracomfort UC214 Guide

UltraComfort will, at its option, repair and/or replace the defective parts and/or components provided that the warranty Electrical:
parts have not been subjected to misuse, abuse or improper service by the consumer; have not been damaged in transit or
handling, and/or have not been altered or repaired by unauthorized representatives. This warranty does not include costs for
unnecessary service calls, i.e., service calls solely for the purpose of educating the consumer about the product, or finding an
unsatisfactory power connection, etc. Exceeding the weight capacity of the chair (published in each owner’s manual)
will void all warranties.
UltraComfort will pay standard shipping rates on all warranted parts for the first year. The consumer will be responsible to
pay cost for transportation, handling and packaging of the parts or components beyond the first year. UltraComfort shall
not be responsible or obligated to pay for any costs or expenses for examination/inspection of any warranted parts. Mechanical:
Travel expenses are not covered under the warranty. All repairs and labor rates must be approved by Ultra Comfort before
service is provided. Any repairs by unapproved or unauthorized representatives will void all warranties.
Models UC214, UC212 325 lbs
Models UC542SMA, UC550JPT, UC570JPT 300 lbs
Models UC544 350 lbs
Models UC332M, UC332L, UC480, UC490, UC520, UC542M, UC542L, 375 lbs
UC550M, UC550L, UC556, UC562, UC558, UC562, UC570M, UC570L,
UC682, UC794, UC798, PL340, UC342, UC114,UC476
Models UC542ME6, UC550M26 500 lbs
Shipping and Handling is charged on warranty parts after the first year.
Lift Frame $50
Recline Bar $45
Scissor Mechs $50
Lag Screws $35
Arm Assembly $50
Back $50
Seat & Back $50
Terms Applicable To Warranties
Hand Controls $25
Transformer $25
Lift Motor $35
Labor Rates
Recline Motor $35
Control Box $25
Recline Bar Bolts $45
Seat $50

Hand Wand Re-Sets
Turn Off Continuous Wand Lighting
Push
& Hold 'M' until all remote lights flash. Then push 'Back Down', Then
'
Back Up', Then 'Sit'.
Total
Hand Control Lock-Out
Push
& Hold 'M' until all remote lights flash. Then
push 'Up'.
Lock Out All But "Up" and
"Recline"
Push
& Hold 'M' until all remote lights flash. Then
push 'head down', Then 'head up', Then 'foot rest up', Then 'ZG'
(UC682 use instead of "ZG")
Reset Hand Control To Factory Settings
Push
& Hold 'M' until all remote lights flash. Then
push 'head down,
Then 'foot rest down'
Head