Ultrahaptics UHDK5 User manual

Control board overview
1. Micro USB port 2. Power jack 3. Power switch
4. SPI port 5. Serial number
TOUCH DEVELOPMENT KITUser Guide
1 32
4
5
1
2
3
4
Transformer
Array
Tracking
device
Thank you for purchasing an Ultrahaptics TOUCH Development Kit (UHDK5). This user guide provides an
introduction to the content in the box, how to get started and how to access support (if required).
Connect the hardware
1. Connect the tracking device to the computer
using the tracking device cable.
2. Connect the control board to the computer
using the USB 2.0 A-Male to Micro-B cable.
3. Connect the power supply to the control
board power connector.
4. Connect the power supply to the mains power
source once all the other connectors have
been inserted (steps 1-3). Set the power switch
to on.
Note: The UHDK5 TOUCH Development Kit has been pre-loaded
with the required firmware.
What’s in the box?
• User guide
• Development Kit hardware platform
(192-transducer square array board, control
board, frame structure and tracking device)
• Tracking device cable
• USB 2.0 A-Male to Micro-B cable
• Multi-regional (US, UK and EU) power supply
• Compliance, warranty and health and safety booklet
Install the Software Development Kit (SDK)
1. Register the product and create a login on the Ultrahaptics Development Site (http://
developer.ultrahaptics.com) using the serial number displayed on the control board (5,
Control board overview).
2. Download and install the SDK from the Ultrahaptics Development Site.
3. Run the demos available as part of the standard SDK.
4. Download and install the Sensation Editor tool from the Ultrahaptics Development
Site and start experimenting with the Ultrahaptics technology!
Need help?
The Ultrahaptics Development Site provides access to a
range of information and support tools, including:
• Tutorials and documentation
• How to request support
• Frequently asked questions
• Latest SDK, firmware and Sensation Editor
Note: To access the Development Site,
the Development Kit must first be registered as
outlined in Install the software (point 1).
U5-00000000
B01-00001-00
V00.00 EX00
Patent: http://www.ultrahaptics.com/patents