Umbrosa NANO UX User manual

NANO UX

2UMBROSA /
ENG Congratulations with your purchase! Please completely read and follow all the instructions.
NL Proficiat met uw aankoop! Gelieve alle instructies te lezen en op te volgen.
FR Félicitations avec votre achat. Lisez svp les instructions complètes.
DE Herzlichen Glückwunsch zu Ihrem Kauf! Bitte vollständig lesen und befolgen Sie alle Anweisungen.
ES Felicidades con su compra! Por favor lea y siga todas las instrucciones.
IT Congratulazioni con il Vs. acquisto! Vi preghiamo di leggere bene le istruzioni e di seguirne scrupolosamente le indicazioni.
IMPORTANT:
Please read this entire manual before installing or operating your umbrella, to reduce risk of personal injury in which a person is injured or harmed,
and/or damage to personal property. Prior to assembly it is important to decide on the location of the umbrella and to respect the following instructions:
- Choose a location that is level and sturdy.
- Avoid any sloping of soft ground.
- Consider a location that will maximize the umbrella’s 360° rotating function (if available)
- Two-person team is recommended for assembly
UMBROSA.COM

UMBROSA / 3
BEFORE YOU START
?
UMBROSA
DEALER

4UMBROSA /
- Product is suitable for light wind and/or light rain only.
- Position product in direction of wind as recommended in user manual.
- Do not use product in inclement weather, such as strong wind, thunderstorms, heavy rain or snow, and make sure that the umbrella is closed and
stored in advance.
- Never allow the umbrella to ap in the wind. This could cause personal injury, damage to personal property, damage to umbrella and/or umbrella
canopy.
- Close product and secure strap when not in use.
- Do not use product without its base or unless attached to building structure, and keep umbrella secured to umbrella base or mount at all times.
- Do not use product over or near harsh chemicals or open ames.
- Place product on stable and level surface.
- Do not allow children to assemble or operate product.
- Do not leave product unattended.
- Store product indoors during winter and extreme weather conditions.
- When adjusting or assembling the umbrella or umbrella base, make sure ngers, toes or any other parts of the body are clear from moving parts.
Failing to do so may result in serious injury.
- Only use Umbrosa replacement parts.
- Read owner’s manual.
- Any modications to the product or failure to follow recommended care will void the warranty.
- Wind damage is not covered under our limited warranty.
DISCLAIMER:
All mounting kits and supports for inground tting and installation on hard surfaces should only be installed by a licensed contractor duly qualied to
perform the installation. Umbrosa assumes no liabilities and expressly disclaims any responsibilities for injuries or damages arising from or related to the
failure of buyer to have any kit or tting installed by a licensed professional contractor.
SAFETY STATEMENTS & WARNINGS

UMBROSA / 5
WARRANTY AND
SPARE PARTS
TIPS AND MAINTENANCE
USER INSTRUCTIONS
NANO UX INSTALLATION
BASEPLATE INSTALLATION
CONCRETE ANCHOR INSTALLATION
NANO UX BASE INSTALLATION
INDEX
p7
p11
- Product is suitable for light wind and/or light rain only.
- Position product in direction of wind as recommended in user manual.
- Do not use product in inclement weather, such as strong wind, thunderstorms, heavy rain or snow, and make sure that the umbrella is closed and
stored in advance.
- Never allow the umbrella to ap in the wind. This could cause personal injury, damage to personal property, damage to umbrella and/or umbrella
canopy.
- Close product and secure strap when not in use.
- Do not use product without its base or unless attached to building structure, and keep umbrella secured to umbrella base or mount at all times.
- Do not use product over or near harsh chemicals or open ames.
- Place product on stable and level surface.
- Do not allow children to assemble or operate product.
- Do not leave product unattended.
- Store product indoors during winter and extreme weather conditions.
- When adjusting or assembling the umbrella or umbrella base, make sure ngers, toes or any other parts of the body are clear from moving parts.
Failing to do so may result in serious injury.
- Only use Umbrosa replacement parts.
- Read owner’s manual.
- Any modications to the product or failure to follow recommended care will void the warranty.
- Wind damage is not covered under our limited warranty.
DISCLAIMER:
All mounting kits and supports for inground tting and installation on hard surfaces should only be installed by a licensed contractor duly qualied to
perform the installation. Umbrosa assumes no liabilities and expressly disclaims any responsibilities for injuries or damages arising from or related to the
failure of buyer to have any kit or tting installed by a licensed professional contractor.
SAFETY STATEMENTS & WARNINGS
p15
p16
p22
p26
p29

6UMBROSA /
INSTALLATION DIMENSIONS
100 cm / 3’3.4” 64 cm / 2’1.2”
215 mm / 8.5”
120 mm / 4.7”
170 mm / 6.7”
105 mm / 4.1”
130 mm / 5.1”
FLOOR PLATE
SUPPORT
250 cm / 8’2.4”
355 cm / 11’7.8”

UMBROSA / 7
1x
NANO UX BASE INSTALLATION
S6
1x
MAFIXTOFNANO-*
1x
1x
MABOLG0010
8x
MABOLG0030
4x
MABASPROT1
1x

8UMBROSA /
1 2
min 38 cm / 15”
max 40,2 cm / 15.75”
Concrete, ceramic or stone tiles:
2 TILES 3 TILES
OR TOTAL THICKNESS
MIN 7 cm / 2.75”
MAX 9 cm / 3.5”
NANO UX BASE INSTALLATION

UMBROSA / 9
8x M8 x 70
4
3
TIGHTEN WELL
NANO UX BASE INSTALLATION

10UMBROSA /
5 5
NANO UX BASE INSTALLATION

UMBROSA / 11
1
HITUBG0000 MAFIXCROTG000000 MAPLAI0320
> 60 cm*
1’ 11.6” > 40 cm*
1’ 3.7”
> 60 cm*
1’ 11.6”
NOT INCLUDED: OPTIONAL
BARS FOR HIGH LOADS
(E.G. INGENUA, MULTI
SPECTRA, ...)
CONCRETE ANCHOR INSTALLATION
UMFIXCROTG000000
13
ENG
NL
FR
DE
ES
IT
Dimensions are indicative. Final responsibility always lies with the installer.
Maten zijn informatief. Eindverantwoordelijkheid ligt bij installateur.
Les dimensions indiquées sont seulement à titre informatif. La responsabilité nale incombe à l’installateur.
Die Maße sind nur informativ. Der Installateur trägt die Verantwortung für die Ausführung.
Los tamaños son sólamente informativos. El instalador es responsable del acabado nal.
Dimensioni sono indicative. La responsabilità nale spetta sempre all’installatore.

12UMBROSA /
2 3
!
!
!
SHADE
SHADE
!
CONCRETE ANCHOR INSTALLATION

UMBROSA / 13
4 5
X*
X* 10 cm
3.9”
4 cm
1.6”
= H
GRASS GRAVEL TILES
H
!
!
CONCRETE ANCHOR INSTALLATION

14UMBROSA /
OR
6
7
8
13
CONCRETE ANCHOR INSTALLATION

UMBROSA / 15
BASEPLATE INSTALLATION
INFIXBSL0B000000
Not included - Niet inbegrepen - Pas inclus
Nicht inbegrien - No incluido - Non incluso
DIN 7991 M10
Ø8 mm DIN 7991 M10

16UMBROSA /
NANO UX INSTALLATION
S3 + S5
MAKEY00030
MAKEY00050
MAPROPL250SQ_FL

UMBROSA / 17
12
4x M10 x 90 2 TILES
NANO UX NANO INSTALLATION
1
2

18UMBROSA /
43
NANO UX INSTALLATION
S3
METAL

UMBROSA / 19
2x M8 x 60 2x M8
65
TIGHTEN WELL
NANO UX INSTALLATION

20UMBROSA /
78
NANO UX INSTALLATION