Uni-com 66392 User manual

Operating instructions

Portable door chime with kinetic bell push

Model: 66392

Quick set up guide

Please read all of the operating instructions carefully before use and keep in a safe place for future reference.

The chime unit and bell

push are already paired

together so your door

chime is ready to use

upon unpacking it from

the box.

Slide down and remove

the battery cover on the

back of the chime unit.

Insert 2 x AA batteries,

observing the polarity

markings.

Note;

The bell push is powered

by kinetic power -

no battery required.

The action of pressing

the bell push generates

the power to transmit

a signal to sound the

chime unit.

The bell push LED will

ash red to conrm it is

transmitting.

Sound selection

The portable door

chime has 26 selectable

sounds.

Volume control

Press the button on

the top of the chime unit

to cycle through the 4

volume levels.

Installation

Test the units in their

intended locations before

you x them in place.

The operating range

will be reduced if the

bell push is mounted

on metal or double

glazed uPVC door

frames. Electrical / wi-

equipment and the

thickness or number of

walls between the bell

push and the chime

unit will also reduce

the operating range.

The bell push must be

mounted the correct way

up (as per the arrow on

the back plate).

The chime unit can be

used wall mounted or

free-standing around

your home and garden.

Bell push - adhesive pad

Ensure the surface is clean and at before applying.

Bell push - screws

Insert a athead screwdriver

into the slot on the top of the

bell push. Gently push and

twist to remove the back plate.

Punch out the holes on the

back plate. Attach to the wall

using the wall plugs and

screws supplied.

Slide the switch on the

back of the chime unit

to select your operating

mode:

•

Chime sound only

•

Chime sound and light

•

Light only

Chime unit - wall

mounted

Fit the screw to the wall

using the wall plug.

Insert the screwhead into

the keyhole on the back

of the chime unit and

slide down.

Note;

The chime unit can be

alternatively powered

direct from the mains

using a 5V adaptor

(not supplied)

Press the button on

the top of the chime

unit to play the currently

selected chime sound.

Press the button on

the top of the chime

unit to cycle through

the chime sounds. Stop

when you hear the one

you want.

Made in China

Uni-Com (Global) Ltd.

1 & 2 Enterprise Way,

Edenbridge, Kent, TN8 6EW

+44 (0)1732 865238

[email protected]

www.uni-com.co.uk

My door chime is not working?

•

Replace the batteries in the chime unit.

•

The chime unit may not be receiving a signal from the bell push, this can be caused by internal walls or uPVC frames. Move the chime unit closer to the

bell push.

•

The chime unit could be receiving interference from other electrical and wireless devices. The common cause for this is that your chime unit is picking

up outside interference from other wireless transmitters. Do not worry, all Uni-Com door chimes are programmed with 256 randomly selected channels

to help avoid such a problem:

(1) Ensure the chime unit operating mode is switched to light and sound.

(2) Remove the batteries from the chime unit. Press and hold the button, while continuing to hold the button reinsert the batteries. Release the

button only when the door chime lights and sounds.

(3) Press and hold the button, after the chime unit sounds and light you will hear a double “beep”. While continuing to hold the button press your

bell push. Release the button and wait for another double “beep”.

Your door chime will now be set up on a different channel.

As stated above the channels are randomly selected so you may need to repeat the above process more than once.

Troubleshooting guide

Portable door chime with kinetic bell push

Model: 66392

Please do not hesitate to contact our friendly customer service team who will be more than happy to help you with any

problems you are experiencing with your door chime set up

How do I add another chime unit to my existing door chime set up?

All Uni-Com kinetic bell push door chimes work together and you can add unlimited chime units to your set up. This will increase the sound area and

means you can have a chime unit in every room in your house if you wish.

(1) Ensure the new chime unit operating mode is switched to light and sound. Press and hold the button, after the chime unit sounds and lights you will

hear a double “beep”. While continuing to hold the button press your bell push. Release the button and wait for another double “beep”.

When you press your bell push the new and existing chime units will sound and light simultaneously.

How do I add another bell push to my existing door chime set up?

A maximum of 4 bell pushes can be paired to the same chime unit.

(1) Ensure the chime unit operating mode is switched to light and sound. Press and hold the button, after the chime unit sounds and lights you will

hear a double “beep”. While continuing to hold the button press your new bell push. Release the button and wait for another double “beep”.

Specication

Frequency: 433.92MHz

R2 device

Hereby, Uni-Com (Global) Ltd declares that the radio equipment type door chime is in compliance with the Directive 2014/53/EU. The full text of the EU Declaration of Conformity is

available to view at www.uni-com.co.uk.

Safety warning

Keep out of reach of children. For indoor use only (operating temp: 0°C to 40°C). Do not drop either unit or subject to excessive blows. The bell push is weather resistant, do not

submerge. Do not mix new and used batteries. Do not mix different types of batteries. Exhausted batteries must be removed

immediately. Failure to follow these instructions could result in re, electric shock, injury or damage to persons, product or property and will invalidate the guarantee.

Batteries